#
#   Copyright (c) 2021 Project CHIP Authors
#
#   Licensed under the Apache License, Version 2.0 (the "License");
#   you may not use this file except in compliance with the License.
#   You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
#   Unless required by applicable law or agreed to in writing, software
#   distributed under the License is distributed on an "AS IS" BASIS,
#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#   See the License for the specific language governing permissions and
#   limitations under the License.
#

# The compile flags written args.gn come from chip.c and chip.cpp.
# Any build specifications (include dirs, compile flags, definitions, etc)
# that is set in the component will be reflected in
# the output args.gn. By default, all components inherit build-level
# specifications stored as idf-build-properties as done in
# tools/cmake/build.cmake.
#
# Adding REQUIRES/PRIV_REQUIRES will also propagate the
# appropriate build specifications from the required component.
idf_build_get_property(idf_path IDF_PATH)

if(NOT CHIP_ROOT)
    get_filename_component(CHIP_ROOT ${CMAKE_CURRENT_SOURCE_DIR}/../../../.. REALPATH)
endif()

include(${CMAKE_CURRENT_LIST_DIR}/ota-image.cmake)

set(CHIP_REQUIRE_COMPONENTS freertos lwip bt mbedtls fatfs app_update console openthread nvs_flash spi_flash)

if((NOT "${IDF_TARGET}" STREQUAL "esp32h2") AND (NOT "${IDF_TARGET}" STREQUAL "esp32c2"))
    list(APPEND CHIP_REQUIRE_COMPONENTS mdns)
endif()

if (NOT CMAKE_BUILD_EARLY_EXPANSION)
    if (CONFIG_COMPILER_OPTIMIZATION_DEFAULT OR CONFIG_COMPILER_OPTIMIZATION_NONE)
        set(is_debug TRUE)
    else()
        if (NOT CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE)
            message(FATAL_ERROR "CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE shall be set")
        endif()
        set(is_debug FALSE)
    endif()
endif()

idf_component_register(SRCS chip.c chip.cpp
                       PRIV_REQUIRES ${CHIP_REQUIRE_COMPONENTS})

# Prepare initial args file (lacking compile flags)
# This will be saved as args.gn.in
set(chip_gn_args "import(\"//args.gni\")\n")

macro(chip_gn_arg_append arg val)
    string(APPEND chip_gn_args "${arg} = ${val}\n")
endmacro()

macro(chip_gn_arg_bool arg boolean)
    if (${boolean})
        string(APPEND chip_gn_args "${arg} = true\n")
    else()
        string(APPEND chip_gn_args "${arg} = false\n")
    endif()
endmacro()

# ESP-IDF lets user set software version string by two ways:
# 1. Project's CMakeLists.txt file and 2. Config option
# It depends on CONFIG_APP_PROJECT_VER_FROM_CONFIG option
# So, below makes the same provision for software version number
if (CONFIG_APP_PROJECT_VER_FROM_CONFIG)
    chip_gn_arg_append("chip_config_software_version_number" ${CONFIG_DEVICE_SOFTWARE_VERSION_NUMBER})
elseif (DEFINED PROJECT_VER_NUMBER)
    chip_gn_arg_append("chip_config_software_version_number" ${PROJECT_VER_NUMBER})
else()
    chip_gn_arg_append("chip_config_software_version_number" 0)
endif()

chip_gn_arg_append("esp32_ar"              "\"${CMAKE_AR}\"")
chip_gn_arg_append("esp32_cc"              "\"${CMAKE_C_COMPILER}\"")
chip_gn_arg_append("esp32_cxx"             "\"${CMAKE_CXX_COMPILER}\"")
chip_gn_arg_append("esp32_cpu"             "\"esp32\"")
chip_gn_arg_bool("is_debug"                ${is_debug})

# Config the chip log level by IDF menuconfig
chip_gn_arg_bool  ("chip_error_logging"        CONFIG_LOG_DEFAULT_LEVEL GREATER_EQUAL 1)
chip_gn_arg_bool  ("chip_progress_logging"     CONFIG_LOG_DEFAULT_LEVEL GREATER_EQUAL 3)
chip_gn_arg_bool  ("chip_detail_logging"       CONFIG_LOG_DEFAULT_LEVEL GREATER_EQUAL 4)
chip_gn_arg_bool  ("chip_automation_logging"   CONFIG_LOG_DEFAULT_LEVEL GREATER_EQUAL 5)

if(CONFIG_ENABLE_CHIPOBLE)
chip_gn_arg_append("chip_config_network_layer_ble"           "true")
else()
chip_gn_arg_append("chip_config_network_layer_ble"           "false")
endif()

if(CONFIG_DISABLE_IPV4)
    chip_gn_arg_append("chip_inet_config_enable_ipv4"        "false")
endif()

if(CHIP_CODEGEN_PREGEN_DIR)
    chip_gn_arg_append("chip_code_pre_generated_directory"  "\"${CHIP_CODEGEN_PREGEN_DIR}\"")
endif()

if(CONFIG_ENABLE_PW_RPC)
    string(APPEND chip_gn_args "import(\"//build_overrides/pigweed.gni\")\n")
    chip_gn_arg_append("remove_default_configs"             "[\"//third_party/connectedhomeip/third_party/pigweed/repo/pw_build:toolchain_cpp_standard\"]")
    chip_gn_arg_append("chip_build_pw_rpc_lib"              "true")
    chip_gn_arg_append("chip_build_pw_trace_lib"            "true")
    chip_gn_arg_append("pw_log_BACKEND"                     "\"//third_party/connectedhomeip/third_party/pigweed/repo/pw_log_basic\"")
    chip_gn_arg_append("pw_assert_BACKEND"                  "\"//third_party/connectedhomeip/third_party/pigweed/repo/pw_assert_log:check_backend\"")
    chip_gn_arg_append("pw_sys_io_BACKEND"                  "\"//third_party/connectedhomeip/examples/platform/esp32/pw_sys_io:pw_sys_io_esp32\"")
    chip_gn_arg_append("pw_trace_BACKEND"                   "\"//third_party/connectedhomeip/third_party/pigweed/repo/pw_trace_tokenized\"")
    chip_gn_arg_append("dir_pw_third_party_nanopb"          "\"//third_party/connectedhomeip/third_party/nanopb/repo\"")
    chip_gn_arg_append("pw_build_LINK_DEPS"                 "[\"\$dir_pw_assert:impl\", \"\$dir_pw_log:impl\"]")
    chip_gn_arg_append("pw_rpc_CONFIG"                      "\"//third_party/connectedhomeip/third_party/pigweed/repo/pw_rpc:disable_global_mutex\"")
endif()

if (CONFIG_BUILD_CHIP_TESTS)
    chip_gn_arg_bool("chip_build_tests"     "true")
endif()

if (CONFIG_IM_PRETTY_PRINT)
    chip_gn_arg_bool("enable_im_pretty_print"	"true")
endif()

if (NOT CONFIG_USE_MINIMAL_MDNS)
    chip_gn_arg_append("chip_mdns"                          "\"platform\"")
else()
    chip_gn_arg_append("chip_mdns"                          "\"minimal\"")
endif()

if (CONFIG_ENABLE_CHIP_SHELL)
    chip_gn_arg_append("chip_build_libshell"                "true")
endif()

if (CONFIG_IDF_TARGET_ESP32H2)
    chip_gn_arg_append("chip_enable_wifi"                       "false")
endif()

if (CONFIG_OPENTHREAD_ENABLED)
    chip_gn_arg_append("chip_enable_openthread"                 "true")
endif()

if (CONFIG_OPENTHREAD_FTD)
    chip_gn_arg_append("chip_openthread_ftd"                    "true")
endif()

if (CONFIG_ENABLE_OTA_REQUESTOR)
    chip_gn_arg_append("chip_enable_ota_requestor"                 "true")
endif()

if (CONFIG_ENABLE_ROTATING_DEVICE_ID)
    chip_gn_arg_append("chip_enable_additional_data_advertising"   "true")
    chip_gn_arg_append("chip_enable_rotating_device_id"            "true")
endif()

if (CONFIG_CHIP_ENABLE_EXTERNAL_PLATFORM)
    chip_gn_arg_append("chip_device_platform"   "\"external\"")
    chip_gn_arg_append("chip_platform_target"   "\"//${CONFIG_CHIP_EXTERNAL_PLATFORM_DIR}\"")
endif()

# Set up CHIP project configuration file

if (CONFIG_CHIP_PROJECT_CONFIG)
    get_filename_component(CHIP_PROJECT_CONFIG
        ${CONFIG_CHIP_PROJECT_CONFIG}
        REALPATH
        BASE_DIR ${CMAKE_SOURCE_DIR}
    )
    set(CHIP_PROJECT_CONFIG "<${CHIP_PROJECT_CONFIG}>")
else()
    set(CHIP_PROJECT_CONFIG "")
endif()

if (CHIP_PROJECT_CONFIG)
    chip_gn_arg_append("chip_project_config_include" "\"${CHIP_PROJECT_CONFIG}\"")
    chip_gn_arg_append("chip_system_project_config_include" "\"${CHIP_PROJECT_CONFIG}\"")
endif()

if (CONFIG_ENABLE_ESP32_FACTORY_DATA_PROVIDER)
    chip_gn_arg_append("chip_use_transitional_commissionable_data_provider" "false")
    chip_gn_arg_append("chip_use_factory_data_provider"                     "true")
endif()

if (CONFIG_ENABLE_ESP32_DEVICE_INFO_PROVIDER)
    chip_gn_arg_append("chip_use_device_info_provider"                     "true")
endif()

set(args_gn_input "${CMAKE_CURRENT_BINARY_DIR}/args.gn.in")
file(GENERATE OUTPUT "${args_gn_input}" CONTENT "${chip_gn_args}")

# This generates the final args.in file to be fed to
# CHIP build using GN build system. The necessary compile_commands.json
# and args.gn.in input file should exist by the time this is invoked,
# since these requirements ar generated at the parent project's
# GENERATE phase.
idf_build_get_property(idf_ver IDF_VER)
set(filter_out "-DHAVE_CONFIG_H" "-DIDF_VER=\\\"${idf_ver}\\\"" )

# CMake adds config include dir relative to build directory.
# Make sure full path is given to CHIP build.
list(APPEND filter_out "-Iconfig")
idf_build_get_property(config_dir CONFIG_DIR)
target_compile_options(${COMPONENT_LIB} PRIVATE "-I${config_dir}")

if(filter_out)
    set(filter_arg "--filter-out=${filter_out}")
endif()

set(args_gn "${CMAKE_CURRENT_BINARY_DIR}/args.gn")
add_custom_command(OUTPUT "${args_gn}"
                   COMMAND ${python} 
                           ${CMAKE_CURRENT_LIST_DIR}/create_args_gn.py 
                           "${CMAKE_BINARY_DIR}"
                           "${idf_path}"
                           "${CMAKE_CURRENT_LIST_DIR}/chip.c"
                           "${CMAKE_CURRENT_LIST_DIR}/chip.cpp"
                           "${args_gn_input}"
                           "${args_gn}"
                           "${filter_arg}"
                   WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
                   DEPENDS "${CMAKE_BINARY_DIR}/compile_commands.json"
                   VERBATIM)

add_custom_target(args_gn DEPENDS "${args_gn}")

# CHIP build as an external project.
find_program(GN_EXECUTABLE gn)
if (${GN_EXECUTABLE} STREQUAL GN_EXECUTABLE-NOTFOUND)
    message(FATAL_ERROR "The 'gn' command was not found. Make sure you have GN installed."
                        "Or have followed necessary build preparations stated in BUILDING.md.")
endif()

set(GN_ROOT_TARGET ${CHIP_ROOT}/config/esp32)

set(chip_libraries "${CMAKE_CURRENT_BINARY_DIR}/lib/libCHIP.a")

if(CONFIG_ENABLE_PW_RPC)
    list(APPEND chip_libraries "${CMAKE_CURRENT_BINARY_DIR}/lib/libPwRpc.a")
endif()

externalproject_add(
    chip_gn
    SOURCE_DIR              ${CHIP_ROOT}
    BINARY_DIR              ${CMAKE_CURRENT_BINARY_DIR}
    CONFIGURE_COMMAND       ${GN_EXECUTABLE} --root=${GN_ROOT_TARGET} gen --check --fail-on-unused-args ${CMAKE_CURRENT_BINARY_DIR}
    BUILD_COMMAND           ninja "esp32"
    INSTALL_COMMAND         ""
    BUILD_BYPRODUCTS        ${chip_libraries}
    WORKING_DIRECTORY       ${CMAKE_CURRENT_LIST_DIR}
    DEPENDS                 args_gn
    BUILD_ALWAYS            1
)

idf_component_get_property(freertos_dir freertos COMPONENT_DIR)

# ESP-IDF components usually need 'freertos/<header.h>', while
# CHIP might include do 'header.h'.
# In IDF V5.0, this path has been moved to
# '${freertos_component}/FreeRTOS-Kernel/include/freertos'
target_include_directories(${COMPONENT_LIB} PRIVATE
    "${freertos_dir}/include/freertos"
    "${freertos_dir}/FreeRTOS-Kernel/include/freertos")

target_include_directories(${COMPONENT_LIB} INTERFACE
    "${CHIP_ROOT}/src/platform/ESP32"
    "${CHIP_ROOT}/src/platform/OpenThread"
    "${CHIP_ROOT}/src/include"
    "${CHIP_ROOT}/src/lib"
    "${CHIP_ROOT}/src"
    "${CHIP_ROOT}/zzz_generated/app-common"
    "${CHIP_ROOT}/examples/platform/esp32"
    "${CHIP_ROOT}/third_party/nlassert/repo/include"
    "${CHIP_ROOT}/third_party/nlio/repo/include"
    "${CMAKE_CURRENT_BINARY_DIR}/src/include"
    "${CMAKE_CURRENT_BINARY_DIR}/include"
    "${CMAKE_CURRENT_BINARY_DIR}/gen/include"
    "${CHIP_ROOT}/config/esp32/${CONFIG_CHIP_EXTERNAL_PLATFORM_DIR}"
    "${CHIP_ROOT}/config/esp32/${CONFIG_CHIP_EXTERNAL_PLATFORM_DIR}/../../"
)

idf_component_get_property(esp32_mbedtls_lib esp32_mbedtls COMPONENT_LIB)

if(CONFIG_BT_ENABLED)
    if("${CONFIG_IDF_TARGET}" STREQUAL "esp32h2")
        idf_component_get_property(bt_lib bt COMPONENT_LIB)
        idf_component_get_property(bt_dir bt COMPONENT_DIR)
        list(APPEND chip_libraries $<TARGET_FILE:${bt_lib}>)
        if(CONFIG_IDF_TARGET_ESP32H2_BETA_VERSION_2)
            list(APPEND chip_libraries ${bt_dir}/controller/lib_esp32h2/esp32h2-bt-lib/beta2/libble_app.a)
        endif()
    elseif("${CONFIG_IDF_TARGET}" STREQUAL "esp32c2")
        idf_component_get_property(bt_lib bt COMPONENT_LIB)
        idf_component_get_property(bt_dir bt COMPONENT_DIR)
        list(APPEND chip_libraries $<TARGET_FILE:${bt_lib}>)
        list(APPEND chip_libraries ${bt_dir}/controller/lib_esp32c2/esp32c2-bt-lib/libble_app.a)
    else()
        idf_component_get_property(bt_lib bt COMPONENT_LIB)
        list(APPEND chip_libraries $<TARGET_FILE:${bt_lib}> -lbtdm_app)
    endif()
endif()

if (CONFIG_ENABLE_CHIP_SHELL)
    idf_component_get_property(console_lib console COMPONENT_LIB)
    list(APPEND chip_libraries $<TARGET_FILE:${console_lib}>)
endif()

if(CONFIG_OPENTHREAD_ENABLED)
    idf_component_get_property(openthread_lib openthread COMPONENT_LIB)
    list(APPEND chip_libraries $<TARGET_FILE:${openthread_lib}>)
endif()

if((NOT CONFIG_USE_MINIMAL_MDNS) AND (NOT CONFIG_IDF_TARGET_ESP32H2) AND (NOT CONFIG_IDF_TARGET_ESP32C2))
    idf_component_get_property(mdns_lib mdns COMPONENT_LIB)
    list(APPEND chip_libraries $<TARGET_FILE:${mdns_lib}>)
endif()

idf_component_get_property(main_lib main COMPONENT_LIB)
list(APPEND chip_libraries $<TARGET_FILE:${main_lib}>)

target_link_libraries(${COMPONENT_LIB} INTERFACE -Wl,--start-group
                                                ${chip_libraries}
                                                $<TARGET_FILE:mbedcrypto> $<TARGET_FILE:${esp32_mbedtls_lib}>
                                                -Wl,--end-group)

# Make the component dependent on our CHIP build
add_dependencies(${COMPONENT_LIB} chip_gn)

if(CONFIG_ENABLE_PW_RPC)
    set(WRAP_FUNCTIONS esp_log_write)
    target_link_libraries(${COMPONENT_LIB} INTERFACE "-Wl,--wrap=${WRAP_FUNCTIONS}")
endif()

# Build Matter OTA image
if (CONFIG_CHIP_OTA_IMAGE_BUILD)
    chip_ota_image(chip-ota-image
        INPUT_FILES ${BUILD_DIR}/${CMAKE_PROJECT_NAME}.bin
        OUTPUT_FILE ${BUILD_DIR}/${CMAKE_PROJECT_NAME}-ota.bin
    )
    # Adding dependecy as app target so that this runs after images are ready
    add_dependencies(chip-ota-image app)
endif()