| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 3.2.2. [TC-DGGEN-2.2] Event functionality test with server as DUT |
| |
| PICS: |
| - DGGEN.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| "https://github.com/project-chip/connectedhomeip/tree/master/examples/all-clusters-app/linux#readme |
| Events to be executed as following |
| 1. Compile app using below command in connectedhomeip folder |
| a. ./scripts/run_in_build_env.sh "./scripts/build/build_examples.py --target linux-arm64-all-clusters-no-ble-asan-clang build" |
| 2. Build respective app (all-clusters-app) |
| 3. Commission DUT to TH |
| 4. Open 2nd terminal of DUT and provide the below command to obtain PID of DUT |
| ps -aef|grep all-clusters-app |
| 5. Follow the Verification step below to generate the event in 2nd terminal of DUT " |
| disabled: true |
| |
| - label: "Commission DUT to TH" |
| verification: | |
| |
| disabled: true |
| |
| - label: |
| "Induce a DUT hardware failure two times as addressed in HardwareFault |
| ENUM table 11.11.6.1. (Ex. Pull the DUT power plug off causing power |
| source failure, and rejoin DUT back to previous TH fabric. Next, |
| repeat power plug off and rejoining DUT back to previous TH fabric one |
| more time.)" |
| PICS: DGGEN.S.E00 |
| verification: | |
| Optional attribute so its not compulsory to get the expected outcome |
| |
| On Raspi platform the event is triggered with below command, Pls use equivalent command on the respective DUT |
| echo '{"Name":"HardwareFaultChange"}' > /tmp/chip_all_clusters_fifo_<PID> (PID of all-clusters-app) |
| |
| ./chip-tool generaldiagnostics read-event hardware-fault-change 1 0 |
| |
| Verify that HardwareFaultChange Event SHALL indicate a change in the set of hardware faults currently |
| detected by the Node. The current and previous field SHALL represent the set of faults as per Section 11.11.6.1, |
| “HardwareFault enum”, On TH(chip-tool) |
| |
| [1659530031.316459][4951:4956] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0033 Event 0x0000_0000 |
| [1659530031.316486][4951:4956] CHIP:TOO: Event number: 6 |
| [1659530031.316505][4951:4956] CHIP:TOO: Priority: Critical |
| [1659530031.316524][4951:4956] CHIP:TOO: Timestamp: 32093879 |
| [1659530031.316629][4951:4956] CHIP:TOO: HardwareFaultChange: { |
| [1659530031.316697][4951:4956] CHIP:TOO: Current: 0 entries |
| [1659530031.316752][4951:4956] CHIP:TOO: Previous: 0 entries |
| [1659530031.316778][4951:4956] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Induce a DUT radio failure two times as addressed in RadioFault ENUM |
| table 11.11.6.2. (Ex. Put the DUT under metallic cover causing WiFi |
| failure. Uncover DUT and make DUT rejoining DUT back to previous TH |
| fabric. Repeat the radio failure one more time and rejoin DUT back to |
| previous TH fabric." |
| PICS: DGGEN.S.E01 |
| verification: | |
| Optional attribute so its not compulsory to get the expected outcome |
| |
| On Raspi platform the event is triggered with below command, Pls use equivalent command on the respective DUT |
| echo '{"Name":"RadioFaultChange"}' > /tmp/chip_all_clusters_fifo_<PID> (PID of all-clusters-app) |
| |
| ./chip-tool generaldiagnostics read-event radio-fault-change 1 0 |
| |
| Verify that RadioFaultChange Event SHALL indicate a change in the set of radio faults currently detected |
| by the Node.TH receives RadioFaultChange event with current and previous data specified by RadioFault ENUM table 11.11.6.2 according to two repeated failures On TH(chip-tool) |
| |
| [1659530181.319598][4969:4975] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0033 Event 0x0000_0001 |
| [1659530181.319628][4969:4975] CHIP:TOO: Event number: 7 |
| [1659530181.319652][4969:4975] CHIP:TOO: Priority: Critical |
| [1659530181.319675][4969:4975] CHIP:TOO: Timestamp: 32245892 |
| [1659530181.319768][4969:4975] CHIP:TOO: RadioFaultChange: { |
| [1659530181.319814][4969:4975] CHIP:TOO: Current: 0 entries |
| [1659530181.319848][4969:4975] CHIP:TOO: Previous: 0 entries |
| [1659530181.319878][4969:4975] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Induce a DUT radio failure two times as addressed in NetworkFault |
| ENUM table 11.11.6.3. (Ex. Put the DUT under metallic cover causing |
| network failure. Uncover DUT and rejoin DUT back to previous TH |
| fabric. Pull the DUT power plug off causing power source failure. |
| rejoining DUT back to previous TH fabric.)" |
| PICS: DGGEN.S.E02 |
| verification: | |
| On Raspi platform the event is triggered with below command, Pls use equivalent command on the respective DUT |
| echo '{"Name":"NetworkFaultChange"}' > /tmp/chip_all_clusters_fifo_<PID> (PID of all-clusters-app) |
| |
| ./chip-tool generaldiagnostics read-event network-fault-change 1 0 |
| |
| Verify that NetworkFaultChange Event SHALL indicate a change in the set of network faults currently |
| TH receives NetworkFaultChange event with current and previous data specified by NetworkFault ENUM table 11.11.2.3 according to two failure causes, On TH(chip-tool) |
| |
| [1659530237.352498][4985:4990] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0033 Event 0x0000_0002 |
| [1659530237.352541][4985:4990] CHIP:TOO: Event number: 8 |
| [1659530237.352573][4985:4990] CHIP:TOO: Priority: Critical |
| [1659530237.352604][4985:4990] CHIP:TOO: Timestamp: 32301872 |
| [1659530237.352728][4985:4990] CHIP:TOO: NetworkFaultChange: { |
| [1659530237.352786][4985:4990] CHIP:TOO: Current: 0 entries |
| [1659530237.352831][4985:4990] CHIP:TOO: Previous: 0 entries |
| [1659530237.352874][4985:4990] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Reboot DUT with a normal reboot process. Rejoin DUT back to previous |
| TH fabric." |
| PICS: DGGEN.S.E03 |
| verification: | |
| Optional attribute so its not compulsory to get the expected outcome |
| |
| On Raspi platform the event is triggered with below command, Pls use equivalent command on the respective DUT |
| echo '{"Name":"<BootReason>"}' > /tmp/chip_all_clusters_fifo_<PID> (PID of all-clusters-app) |
| |
| ./chip-tool generaldiagnostics read-event boot-reason 1 0 |
| |
| Read the event data of BootReason specified by Table 103 BootReason ENUM table On TH(chip-tool) |
| |
| [1659530352.583608][4993:4998] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0033 Event 0x0000_0003 |
| [1659530352.583636][4993:4998] CHIP:TOO: Event number: 0 |
| [1659530352.583656][4993:4998] CHIP:TOO: Priority: Critical |
| [1659530352.583675][4993:4998] CHIP:TOO: Timestamp: 29669541 |
| [1659530352.583750][4993:4998] CHIP:TOO: BootReason: { |
| [1659530352.583789][4993:4998] CHIP:TOO: BootReason: 0 |
| [1659530352.583813][4993:4998] CHIP:TOO: } |
| disabled: true |
