| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 80.3.4. [TC-MOD-3.4] OnMode Overwriting StartUpMode (DUT as Server) |
| |
| PICS: |
| - MOD.S.A0004 |
| - MOD.S.A0005 |
| - OO.S.A4003 |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| To Execute the TC-MOD-3.4 test case using reboot in raspi device we followed the below suggested way: |
| |
| To run a reboot test case on raspi, run the app with --KVS flag with a file in local directory and pass that file to the command to launch the app. Steps |
| |
| |
| step-1: create a file using touch command , something like touch mytest.txt |
| step-2: chmod 777 mytest.txt |
| step-3: launch the app ./chip-all-clusters-app --KVS ./mytest.txt |
| |
| if you launch the app with the above commands and provision the app, even when you reboot the app with 'sudo reboot' , next time you launch the app with 'sudo ./out/all-clusters-app/chip-all-clusters-app --KVS ./mytest.txt' , you can run read/write attribs and commands without reprovisioning the device. |
| |
| To execute this test case set onmode to any integer value because as default it value has null. |
| |
| ./chip-tool modeselect write on-mode 4 1 1 |
| disabled: true |
| |
| - label: "Preconditions" |
| verification: | |
| This test case is verified after the device is provisioned. Pls provision device first, Pass appropriate nodeID in the below command |
| disabled: true |
| |
| - label: "TH reads the StartUpMode attribute from the DUT" |
| PICS: MOD.S.A0004 |
| verification: | |
| ./chip-tool modeselect read start-up-mode 1 1 |
| |
| on TH(chip-tool),Verify that the DUT response is the integer. Record this value for usage in step 2 and below is the sample log provided for the raspi platform: |
| |
| |
| [1651099663211] [82177:7560652] CHIP: [TOO] Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0004 DataVersion: 2609052118 |
| [1651099663212] [82177:7560652] CHIP: [TOO] StartUpMode: 0 |
| disabled: true |
| |
| - label: "TH reads the OnMode attribute from the DUT" |
| PICS: MOD.S.A0005 |
| verification: | |
| ./chip-tool modeselect read on-mode 1 1 |
| |
| on TH(chip-tool),Verify that the DUT response is the integer. Record this value for usage in step 2b and below is the sample log provided for the raspi platform: |
| |
| |
| [1654780979.979743][61542:61547] CHIP:DMG: } |
| [1654780979.980040][61542:61547] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0005 DataVersion: 235764160 |
| [1654780979.980202][61542:61547] CHIP:TOO: OnMode: 0 |
| disabled: true |
| |
| - label: |
| "If the StartUpMode and OnMode attributes have the same value, proceed |
| to step 2c, Otherwise proceed to step 3." |
| PICS: MOD.S.A0004 && MOD.S.A0005 |
| verification: | |
| NOTE: |
| If the StartUpMode and OnMode attributes have the same value, proceed to step 2c, Otherwise proceed to step 3. |
| disabled: true |
| |
| - label: "TH reads the SupportedModes attribute from the DUT" |
| PICS: MOD.S.A0002 |
| verification: | |
| ./chip-tool modeselect read supported-modes 1 1 |
| |
| Verify on TH(chip-tool) logs supported modes provides a list of mode, each mode should be a struct containing a label and All of these values should be no larger than 16 bits for usage in step 2d and below is the sample log provided for the raspi platform: |
| |
| [1654154058.284710][3492:3497] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0002 DataVersion: 694763126 |
| [1654154058.284829][3492:3497] CHIP:TOO: SupportedModes: 3 entries |
| [1654154058.284909][3492:3497] CHIP:TOO: [1]: { |
| [1654154058.284939][3492:3497] CHIP:TOO: Label: Black |
| [1654154058.284966][3492:3497] CHIP:TOO: Mode: 0 |
| [1654154058.284999][3492:3497] CHIP:TOO: SemanticTags: 1 entries |
| [1654154058.285037][3492:3497] CHIP:TOO: [1]: { |
| [1654154058.285066][3492:3497] CHIP:TOO: MfgCode: 0 |
| [1654154058.285094][3492:3497] CHIP:TOO: Value: 0 |
| [1654154058.285121][3492:3497] CHIP:TOO: } |
| [1654154058.285150][3492:3497] CHIP:TOO: } |
| [1654154058.285188][3492:3497] CHIP:TOO: [2]: { |
| [1654154058.285216][3492:3497] CHIP:TOO: Label: Cappuccino |
| [1654154058.285243][3492:3497] CHIP:TOO: Mode: 4 |
| [1654154058.285274][3492:3497] CHIP:TOO: SemanticTags: 1 entries |
| [1654154058.285309][3492:3497] CHIP:TOO: [1]: { |
| [1654154058.285337][3492:3497] CHIP:TOO: MfgCode: 0 |
| [1654154058.285364][3492:3497] CHIP:TOO: Value: 0 |
| [1654154058.285390][3492:3497] CHIP:TOO: } |
| [1654154058.285418][3492:3497] CHIP:TOO: } |
| [1654154058.285456][3492:3497] CHIP:TOO: [3]: { |
| [1654154058.285484][3492:3497] CHIP:TOO: Label: Espresso |
| [1654154058.285513][3492:3497] CHIP:TOO: Mode: 7 |
| [1654154058.285547][3492:3497] CHIP:TOO: SemanticTags: 1 entries |
| [1654154058.285638][3492:3497] CHIP:TOO: [1]: { |
| [1654154058.285671][3492:3497] CHIP:TOO: MfgCode: 0 |
| [1654154058.285701][3492:3497] CHIP:TOO: Value: 0 |
| [1654154058.285730][3492:3497] CHIP:TOO: } |
| [1654154058.285762][3492:3497] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Select a value from the list in step 2c with a different value than |
| the StartUpMode value read in step 1. TH sends a write command for |
| OnMode to the DUT with the selected value." |
| PICS: MOD.S.A0002 && MOD.S.C00.Rsp |
| verification: | |
| ./chip-tool modeselect write on-mode 7 1 1 |
| |
| on TH(chip-tool),Verify that the DUT with a successful (value 0x00) status response and below is the sample log provided for the raspi platform: |
| |
| [1651099941884] [84269:7567211] CHIP: [DMG] WriteResponseMessage = |
| [1651099941884] [84269:7567211] CHIP: [DMG] { |
| [1651099941884] [84269:7567211] CHIP: [DMG] AttributeStatusIBs = |
| [1651099941884] [84269:7567211] CHIP: [DMG] [ |
| [1651099941884] [84269:7567211] CHIP: [DMG] AttributeStatusIB = |
| [1651099941884] [84269:7567211] CHIP: [DMG] { |
| [1651099941887] [84269:7567211] CHIP: [DMG] AttributePathIB = |
| [1651099941887] [84269:7567211] CHIP: [DMG] { |
| [1651099941887] [84269:7567211] CHIP: [DMG] Endpoint = 0x1, |
| [1651099941887] [84269:7567211] CHIP: [DMG] Cluster = 0x50, |
| [1651099941887] [84269:7567211] CHIP: [DMG] Attribute = 0x0000_0005, |
| [1651099941887] [84269:7567211] CHIP: [DMG] } |
| [1651099941887] [84269:7567211] CHIP: [DMG] |
| [1651099941887] [84269:7567211] CHIP: [DMG] StatusIB = |
| [1651099941887] [84269:7567211] CHIP: [DMG] { |
| [1651099941887] [84269:7567211] CHIP: [DMG] status = 0x00 (SUCCESS), |
| [1651099941887] [84269:7567211] CHIP: [DMG] }, |
| [1651099941887] [84269:7567211] CHIP: [DMG] |
| [1651099941887] [84269:7567211] CHIP: [DMG] }, |
| [1651099941887] [84269:7567211] CHIP: [DMG] |
| [1651099941887] [84269:7567211] CHIP: [DMG] ], |
| [1651099941887] [84269:7567211] CHIP: [DMG] |
| [1651099941887] [84269:7567211] CHIP: [DMG] InteractionModelRevision = 1 |
| [1651099941887] [84269:7567211] CHIP: [DMG] } |
| disabled: true |
| |
| - label: "TH reads the OnMode attribute from the DUT" |
| PICS: MOD.S.F00 && MOD.S.A0005 |
| verification: | |
| ./chip-tool modeselect read on-mode 1 1 |
| |
| on TH(chip-tool),Verify that the DUT responds with an integer and below is the sample log provided for the raspi platform: |
| |
| [1669190858.739158][4187:4189] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0005 DataVersion: 4107771634 |
| [1669190858.739222][4187:4189] CHIP:TOO: OnMode: 7 |
| disabled: true |
| |
| - label: |
| "TH writes 1 to StartUpOnOff attribute of the OnOff Cluster of the DUT" |
| PICS: OO.S.A4003 |
| verification: | |
| ./chip-tool onoff write start-up-on-off 1 1 1 |
| |
| on TH(chip-tool),Verify that the response status was success and below is the sample log provided for the raspi platform: |
| |
| [1651101661959] [90832:7598169] CHIP: [DMG] WriteResponseMessage = |
| [1651101661959] [90832:7598169] CHIP: [DMG] { |
| [1651101661959] [90832:7598169] CHIP: [DMG] AttributeStatusIBs = |
| [1651101661959] [90832:7598169] CHIP: [DMG] [ |
| [1651101661959] [90832:7598169] CHIP: [DMG] AttributeStatusIB = |
| [1651101661959] [90832:7598169] CHIP: [DMG] { |
| [1651101661960] [90832:7598169] CHIP: [DMG] AttributePathIB = |
| [1651101661960] [90832:7598169] CHIP: [DMG] { |
| [1651101661960] [90832:7598169] CHIP: [DMG] Endpoint = 0x1, |
| [1651101661960] [90832:7598169] CHIP: [DMG] Cluster = 0x6, |
| [1651101661960] [90832:7598169] CHIP: [DMG] Attribute = 0x0000_4003, |
| [1651101661960] [90832:7598169] CHIP: [DMG] } |
| [1651101661960] [90832:7598169] CHIP: [DMG] |
| [1651101661960] [90832:7598169] CHIP: [DMG] StatusIB = |
| [1651101661960] [90832:7598169] CHIP: [DMG] { |
| [1651101661960] [90832:7598169] CHIP: [DMG] status = 0x00 (SUCCESS), |
| [1651101661960] [90832:7598169] CHIP: [DMG] }, |
| [1651101661960] [90832:7598169] CHIP: [DMG] |
| [1651101661960] [90832:7598169] CHIP: [DMG] }, |
| [1651101661960] [90832:7598169] CHIP: [DMG] |
| [1651101661960] [90832:7598169] CHIP: [DMG] ], |
| [1651101661960] [90832:7598169] CHIP: [DMG] |
| [1651101661960] [90832:7598169] CHIP: [DMG] InteractionModelRevision = 1 |
| [1651101661960] [90832:7598169] CHIP: [DMG] } |
| disabled: true |
| |
| - label: "Physically power cycle the device." |
| verification: | |
| Physically power cycle the device. |
| disabled: true |
| |
| - label: "TH reads the CurrentMode attribute from the DUT" |
| PICS: MOD.S.A0003 |
| verification: | |
| ./chip-tool modeselect read current-mode 1 1 |
| |
| |
| on TH(chip-tool),Verify that this number is the same with the number recorded in step 3 and below is the sample log provided for the raspi platform: |
| |
| [1669190936.869804][4194:4196] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0003 DataVersion: 3908583538 |
| [1669190936.869875][4194:4196] CHIP:TOO: CurrentMode: 7 |
| disabled: true |
