| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 15.4.1. [TC-SC-4.1] Commissionable Node Discovery [DUT as Commissionee] |
| |
| PICS: |
| - MCORE.ROLE.COMMISSIONEE |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: |
| "DUT is Commissioned and put in Commissioning Mode using Open Basic |
| Commissioning Window command and starts advertising Commissionable |
| Node Discovery service using DNS-SD" |
| PICS: CADMIN.S.C01.Rsp |
| verification: | |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 200 1 0 --timedInteractionTimeoutMs 1000 |
| |
| verify success on TH (Chip-tool) Logs: |
| |
| [1652340903.034346][2874:2879] CHIP:DMG: InvokeResponseMessage = |
| [1652340903.034398][2874:2879] CHIP:DMG: { |
| [1652340903.034447][2874:2879] CHIP:DMG: suppressResponse = false, |
| [1652340903.034499][2874:2879] CHIP:DMG: InvokeResponseIBs = |
| [1652340903.034565][2874:2879] CHIP:DMG: [ |
| [1652340903.034615][2874:2879] CHIP:DMG: InvokeResponseIB = |
| [1652340903.034748][2874:2879] CHIP:DMG: { |
| [1652340903.034806][2874:2879] CHIP:DMG: CommandStatusIB = |
| [1652340903.034873][2874:2879] CHIP:DMG: { |
| [1652340903.034936][2874:2879] CHIP:DMG: CommandPathIB = |
| [1652340903.035006][2874:2879] CHIP:DMG: { |
| [1652340903.035078][2874:2879] CHIP:DMG: EndpointId = 0x0, |
| [1652340903.035159][2874:2879] CHIP:DMG: ClusterId = 0x3c, |
| [1652340903.035223][2874:2879] CHIP:DMG: CommandId = 0x1, |
| [1652340903.035291][2874:2879] CHIP:DMG: }, |
| [1652340903.035362][2874:2879] CHIP:DMG: |
| [1652340903.035423][2874:2879] CHIP:DMG: StatusIB = |
| [1652340903.035495][2874:2879] CHIP:DMG: { |
| [1652340903.035566][2874:2879] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1652340903.035634][2874:2879] CHIP:DMG: }, |
| [1652340903.035704][2874:2879] CHIP:DMG: |
| [1652340903.035763][2874:2879] CHIP:DMG: }, |
| [1652340903.035841][2874:2879] CHIP:DMG: |
| [1652340903.035898][2874:2879] CHIP:DMG: }, |
| [1652340903.035965][2874:2879] CHIP:DMG: |
| [1652340903.036014][2874:2879] CHIP:DMG: ], |
| [1652340903.036077][2874:2879] CHIP:DMG: |
| [1652340903.036126][2874:2879] CHIP:DMG: InteractionModelRevision = 1 |
| [1652340903.036175][2874:2879] CHIP:DMG: }, |
| [1652340903.036294][2874:2879] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| [1652340903.036375][2874:2879] CHIP:DMG: ICR moving to [AwaitingDe] |
| |
| The delay timer is given 200 as an example , use whatever works for your product |
| disabled: true |
| |
| - label: "Check DNS-SD subtypes used by DUT" |
| PICS: |
| MCORE.COM.WIFI && MCORE.COM.ETH && MCORE.COM.THR && |
| MCORE.SC.VENDOR_SUBTYPE && MCORE.SC.DEVTYPE_SUBTYPE && MCORE.SC.VP_KEY |
| && MCORE.SC.SII_OP_DISCOVERY_KEY && MCORE.SC.SAI_OP_DISCOVERY_KEY && |
| MCORE.SC.DT_KEY&& MCORE.SC.DN_KEY && MCORE.SC.RI_KEY && |
| MCORE.SC.PH_KEY && MCORE.SC.PI_KEY |
| verification: | |
| Run the below commands within the mentioned time interval used in open-commissioning-window in step-1. |
| Run the below avahi browse command in the TH terminal |
| |
| avahi-browse -rt _matterc._udp |
| |
| |
| ubuntu@ubuntu:~$ avahi-browse -rt _matterc._udp |
| |
| Verify the device is advertising _matterc._udp service like below output in TH terminal Log: (Verify for the DUT"s actual values (like vendor ID, PID ..etc) as mentioned in the expected outcome of the test plan, The below log contains the data from the reference raspi accessory) |
| |
| |
| + wlan0 IPv6 5A4E867284D08B13 _matterc._udp local |
| + eth0 IPv6 5A4E867284D08B13 _matterc._udp local |
| = eth0 IPv6 5A4E867284D08B13 _matterc._udp local |
| hostname = [E45F010F1A010000.local] |
| address = [fe80::e65f:1ff:fe0f:1a01] |
| port = [5540] |
| txt = ["PI=" "PH=36" "CM=1" "D=3840" "T=1" "VP=65521+32769"] |
| = wlan0 IPv6 5A4E867284D08B13 _matterc._udp local |
| hostname = [E45F010F1A010000.local] |
| address = [fe80::e65f:1ff:fe0f:1a01] |
| port = [5540] |
| txt = ["PI=" "PH=36" "CM=1" "D=3840" "T=1" "VP=65521+32769"] |
| |
| |
| |
| |
| If we use Thread setup, then the Service Domain will be 422F10CDC290A406.local |
| verify CM flag is 1 |
| |
| to look for subtypes, on the raspi run $ avahi-browse -p _services._dns-sd._udp | grep _matterc |
| |
| +;eth0;IPv6;_matterc;_udp;local |
| +;eth0;IPv6;_V65521;_sub._matterc._udp;local |
| +;eth0;IPv6;_S15;_sub._matterc._udp;local |
| +;eth0;IPv6;_L3840;_sub._matterc._udp;local |
| +;eth0;IPv6;_CM;_sub._matterc._udp;local |
| disabled: true |
| |
| - label: |
| "DUT is rebooted, then put in Commissioning Mode using Open Basic |
| Commissioning Window command, starting advertising Commissionable Node |
| Discovery service using DNS-SD" |
| PICS: CADMIN.S.C01.Rsp |
| verification: | |
| Reboot the device and commission the DUT again. Open the commissioning window using the below command in the TH (Chip-tool) terminal |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 200 1 0 --timedInteractionTimeoutMs 1000 |
| |
| verify success on TH (Chip-tool) logs: |
| |
| [1652341174.803430][2893:2898] CHIP:DMG: InvokeResponseMessage = |
| [1652341174.803488][2893:2898] CHIP:DMG: { |
| [1652341174.803560][2893:2898] CHIP:DMG: suppressResponse = false, |
| [1652341174.803622][2893:2898] CHIP:DMG: InvokeResponseIBs = |
| [1652341174.803698][2893:2898] CHIP:DMG: [ |
| [1652341174.803757][2893:2898] CHIP:DMG: InvokeResponseIB = |
| [1652341174.803835][2893:2898] CHIP:DMG: { |
| [1652341174.803897][2893:2898] CHIP:DMG: CommandStatusIB = |
| [1652341174.803975][2893:2898] CHIP:DMG: { |
| [1652341174.804047][2893:2898] CHIP:DMG: CommandPathIB = |
| [1652341174.804128][2893:2898] CHIP:DMG: { |
| [1652341174.804213][2893:2898] CHIP:DMG: EndpointId = 0x0, |
| [1652341174.804292][2893:2898] CHIP:DMG: ClusterId = 0x3c, |
| [1652341174.804377][2893:2898] CHIP:DMG: CommandId = 0x1, |
| [1652341174.804450][2893:2898] CHIP:DMG: }, |
| [1652341174.804539][2893:2898] CHIP:DMG: |
| [1652341174.804654][2893:2898] CHIP:DMG: StatusIB = |
| [1652341174.804738][2893:2898] CHIP:DMG: { |
| [1652341174.804821][2893:2898] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1652341174.804911][2893:2898] CHIP:DMG: }, |
| [1652341174.804993][2893:2898] CHIP:DMG: |
| [1652341174.805067][2893:2898] CHIP:DMG: }, |
| [1652341174.805152][2893:2898] CHIP:DMG: |
| [1652341174.805220][2893:2898] CHIP:DMG: }, |
| [1652341174.805307][2893:2898] CHIP:DMG: |
| [1652341174.805365][2893:2898] CHIP:DMG: ], |
| [1652341174.805439][2893:2898] CHIP:DMG: |
| [1652341174.805497][2893:2898] CHIP:DMG: InteractionModelRevision = 1 |
| [1652341174.805555][2893:2898] CHIP:DMG: }, |
| [1652341174.805690][2893:2898] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| [1652341174.805786][2893:2898] CHIP:DMG: ICR moving to [AwaitingDe] |
| |
| The delay timer is given 200 as an example , use whatever works for your product |
| disabled: true |
| |
| - label: "Check DNS-SD subtypes used by DUT" |
| PICS: |
| MCORE.COM.WIFI && MCORE.COM.ETH && MCORE.COM.THR && |
| MCORE.SC.VENDOR_SUBTYPE && MCORE.SC.DEVTYPE_SUBTYPE && MCORE.SC.VP_KEY |
| && MCORE.SC.SII_OP_DISCOVERY_KEY && MCORE.SC.SAI_OP_DISCOVERY_KEY && |
| MCORE.SC.DT_KEY && MCORE.SC.DN_KEY && MCORE.SC.RI_KEY && |
| MCORE.SC.PH_KEY && MCORE.SC.PI_KEY |
| verification: | |
| Run the below avahi browse command in TH terminal |
| |
| avahi-browse -rt _matterc._udp |
| |
| Verify on the below output in TH terminal Log: |
| |
| + wlan0 IPv6 F6385CBB29F7CE93 _matterc._udp local |
| + eth0 IPv6 F6385CBB29F7CE93 _matterc._udp local |
| = eth0 IPv6 F6385CBB29F7CE93 _matterc._udp local |
| hostname = [E45F010F1A010000.local] |
| address = [fe80::e65f:1ff:fe0f:1a01] |
| port = [5540] |
| txt = ["PI=" "PH=36" "CM=1" "D=3840" "T=1" "VP=65521+32769"] |
| = wlan0 IPv6 F6385CBB29F7CE93 _matterc._udp local |
| hostname = [E45F010F1A010000.local] |
| address = [fe80::e65f:1ff:fe0f:1a01] |
| port = [5540] |
| txt = ["PI=" "PH=36" "CM=1" "D=3840" "T=1" "VP=65521+32769"] |
| |
| |
| |
| |
| |
| |
| Service Domain 422F10CDC290A406.local |
| verify CM flag is 1 |
| |
| to look for subtypes, on the raspi run $ avahi-browse -p _services._dns-sd._udp | grep _matterc |
| |
| +;eth0;IPv6;_matterc;_udp;local |
| +;eth0;IPv6;_V65521;_sub._matterc._udp;local |
| +;eth0;IPv6;_S15;_sub._matterc._udp;local |
| +;eth0;IPv6;_L3840;_sub._matterc._udp;local |
| +;eth0;IPv6;_CM;_sub._matterc._udp;local |
| disabled: true |
| |
| - label: "Wait for OBCW timeout to expire" |
| verification: | |
| Wait until open-basic-commissioning-window time to expire. |
| disabled: true |
| |
| - label: |
| "DUT is Commissioned and instructed to enter in commissioning mode |
| using Open Commissioning Window command" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| Run the below open-commissioning-window in TH Terminal |
| |
| ./chip-tool pairing open-commissioning-window 1 1 200 2000 3840 |
| |
| verify success on TH (Chip-tool) logs: |
| |
| [1652341411.383669][2929:2934] CHIP:DMG: InvokeResponseMessage = |
| [1652341411.383720][2929:2934] CHIP:DMG: { |
| [1652341411.383769][2929:2934] CHIP:DMG: suppressResponse = false, |
| [1652341411.383821][2929:2934] CHIP:DMG: InvokeResponseIBs = |
| [1652341411.383886][2929:2934] CHIP:DMG: [ |
| [1652341411.383936][2929:2934] CHIP:DMG: InvokeResponseIB = |
| [1652341411.384009][2929:2934] CHIP:DMG: { |
| [1652341411.384068][2929:2934] CHIP:DMG: CommandStatusIB = |
| [1652341411.384139][2929:2934] CHIP:DMG: { |
| [1652341411.384203][2929:2934] CHIP:DMG: CommandPathIB = |
| [1652341411.384278][2929:2934] CHIP:DMG: { |
| [1652341411.384349][2929:2934] CHIP:DMG: EndpointId = 0x0, |
| [1652341411.384427][2929:2934] CHIP:DMG: ClusterId = 0x3c, |
| [1652341411.384501][2929:2934] CHIP:DMG: CommandId = 0x0, |
| [1652341411.384624][2929:2934] CHIP:DMG: }, |
| [1652341411.384722][2929:2934] CHIP:DMG: |
| [1652341411.384795][2929:2934] CHIP:DMG: StatusIB = |
| [1652341411.384877][2929:2934] CHIP:DMG: { |
| [1652341411.384958][2929:2934] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1652341411.385035][2929:2934] CHIP:DMG: }, |
| [1652341411.385116][2929:2934] CHIP:DMG: |
| [1652341411.385188][2929:2934] CHIP:DMG: }, |
| [1652341411.385271][2929:2934] CHIP:DMG: |
| [1652341411.385337][2929:2934] CHIP:DMG: }, |
| [1652341411.385416][2929:2934] CHIP:DMG: |
| [1652341411.385474][2929:2934] CHIP:DMG: ], |
| [1652341411.385547][2929:2934] CHIP:DMG: |
| [1652341411.385605][2929:2934] CHIP:DMG: InteractionModelRevision = 1 |
| [1652341411.385662][2929:2934] CHIP:DMG: }, |
| [1652341411.385794][2929:2934] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 Status=0x0 |
| [1652341411.385860][2929:2934] CHIP:CTL: Successfully opened pairing window on the device |
| disabled: true |
| |
| - label: "Check DNS-SD subtypes used by DUT" |
| PICS: |
| MCORE.COM.WIFI && MCORE.COM.ETH && MCORE.COM.THR && |
| MCORE.SC.VENDOR_SUBTYPE && MCORE.SC.DEVTYPE_SUBTYPE && MCORE.SC.VP_KEY |
| && MCORE.SC.SII_OP_DISCOVERY_KEY && MCORE.SC.SAI_OP_DISCOVERY_KEY && |
| MCORE.SC.DT_KEY && MCORE.SC.DN_KEY && MCORE.SC.RI_KEY && |
| MCORE.SC.PH_KEY && MCORE.SC.PI_KEY |
| verification: | |
| Same verification steps as Step 3, Except Verify CM flag value to be 2 |
| |
| |
| ubuntu@ubuntu:~$ avahi-browse -rt _matterc._udp |
| |
| Verify on the below output in TH terminal Log: |
| |
| |
| |
| + wlan0 IPv6 71DED0325CF9AB38 _matterc._udp local |
| + eth0 IPv6 71DED0325CF9AB38 _matterc._udp local |
| = eth0 IPv6 71DED0325CF9AB38 _matterc._udp local |
| hostname = [E45F010F1A010000.local] |
| address = [fe80::e65f:1ff:fe0f:1a01] |
| port = [5540] |
| txt = ["PI=" "PH=36" "CM=2" "D=3840" "T=1" "VP=65521+32769"] |
| = wlan0 IPv6 71DED0325CF9AB38 _matterc._udp local |
| hostname = [E45F010F1A010000.local] |
| address = [fe80::e65f:1ff:fe0f:1a01] |
| port = [5540] |
| txt = ["PI=" "PH=36" "CM=2" "D=3840" "T=1" "VP=65521+32769"] |
| disabled: true |
| |
| - label: "Wait for OCW timeout to expire" |
| verification: | |
| Wait until open-commissioning-window time to expire. |
| disabled: true |
| |
| - label: "If (MCORE.SC.EXTENDED_DISCOVERY ) enable Extended Discovery" |
| PICS: MCORE.SC.EXTENDED_DISCOVERY |
| verification: | |
| If the device supports Discovery for an extended period of time, the Device should continue to advertise. Use the avahi-browse command and you should see the _matterc._udp advertisement |
| |
| |
| Reference Raspberrypi device is not supporting extended discovery. |
| disabled: true |
| |
| - label: |
| "If (MCORE.SC.EXTENDED_DISCOVERY ) check DNS-SD subtypes used by DUT" |
| PICS: |
| MCORE.SC.EXTENDED_DISCOVERY && MCORE.COM.WIFI && MCORE.COM.ETH && |
| MCORE.COM.THR && MCORE.SC.VENDOR_SUBTYPE && MCORE.SC.DEVTYPE_SUBTYPE |
| && MCORE.SC.VP_KEY && MCORE.SC.SII_OP_DISCOVERY_KEY && |
| MCORE.SC.SAI_OP_DISCOVERY_KEY && MCORE.SC.DT_KEY && MCORE.SC.DN_KEY && |
| MCORE.SC.RI_KEY && MCORE.SC.PH_KEY && MCORE.SC.PI_KEY |
| verification: | |
| Run and Verify on the below output in TH terminal Log: (Below is the sample log , as RPI doesn"t support the extended discovery) |
| Verify the CM flag value is 0 |
| |
| avahi-browse -rt _matterc._udp |
| + eth0 IPv6 DD200C20D25AE5F7 _matterc._udp local |
| + eth0 IPv4 DD200C20D25AE5F7 _matterc._udp local |
| = eth0 IPv6 DD200C20D25AE5F7 _matterc._udp local |
| hostname = [matter-te-7.local] |
| address = [fd00::e7] |
| port = [11111] |
| txt = ["CM=0" "D=840"] |
| = eth0 IPv4 DD200C20D25AE5F7 _matterc._udp local |
| hostname = [matter-te-7.local] |
| address = [192.168.3.53] |
| port = [11111] |
| txt = ["CM=0" "D=840"] |
| disabled: true |
