When progress logging is enabled, the message layer emits a number of prints that provide more details on the messages being sent or received. Most of these are fairly self explanatory with the exception of the ones listed below.
On message transmission, the following print is emitted. The various fields that will be expanded are denoted with $ .
Unless specified, numerical values are represented in decimal notation.
<<< [E:$exchange_id S:$session_id M:$msg_id (Ack: $ack_msg_id)] ($msg_category) Msg TX to $fabric_index:$destination [$compressed_fabric_id] [$peer_address] --- Type $protocol_id:$msg_type ($protocol_name:$msg_type_name)
| Field | Description |
|---|---|
| exchange_id | Exchange ID + IsInitiator flag from message header (‘i’ if initiator, ‘r’ if responder') |
| session_id | Local session id for unicast secure, 0 for unicast un-secure, group id for groupcast |
| msg_id | Message counter |
| ack_msg_id | If present, the ACK message counter. Otherwise, this entire field is omitted from display |
| msg_category | U: Un-secure Unicast, S: Secure Unicast, G: Secure Groupcast |
| fabric_index | Fabric index on the sending side |
| destination | 64-bit Node Identifier that can represent both group, operational and temporary node identifiers depending on $msg_category (in hex) |
| compressed_fabric_id | If present and valid, lower 16-bits of the compressed fabric ID (in hex). Otherwise, it will be set to 0000. |
| peer_address | The peer address (IP and port) for the session |
| protocol_id | 16-bit Protocol ID within the common vendor namespace (in hex) |
| msg_type | 8-bit message type ID (in hex) |
| protocol_name | If available, a logical name for the protocol |
| msg_type_name | If available, a logical name for the message type |
Unencrypted Unicast:
<<< [E:26341i S:0 M:264589322] (U) Msg TX to 0:0000000000000000 [0000] --- Type 0000:30 (SecureChannel:CASE_Sigma1)
Secure Unicast:
<<< [E:26347i S:5110 M:30642895 (Ack: 9203233)] (S) Msg TX to 1:0000000012344321 [1667] --- Type 0001:06 (IM:WriteRequest)
Secure Groupcast:
<<< [E:26349i S:17850 M:2000] (G) Msg TX to 1:FFFFFFFFFFFF0102 [1667] --- Type 0001:06 (IM:WriteRequest)
On message transmission, the following print is emitted. The various fields that will be expanded are denoted with $ .
Unless specified, numerical values are represented in decimal notation.
>>> [E:$exchange_id M: $msg_id (Ack: $ack_msg_id)] ($msg_category) Msg RX from $fabric_index:$source [$compressed_fabric_id] --- Type $protocol_id:$msg_type ($protocol_name:$msg_type_name)
This has a similar legend to that for transmission except $source denotes the source's node identifier and $fabric_index is the index on the recipient.
Unencrypted Unicast:
>>> [E:26341i S:0 M:264589322] (U) Msg RX from 0:0FDE2AE2EAF5D74D [0000] --- Type 0000:30 (SecureChannel:CASE_Sigma1)
Secure Unicast:
>>> [E:26342i S:62311 M:30642885] (S) Msg RX from 1:000000000001B669 [1667] --- Type 0001:08 (IM:InvokeCommandRequest)
Secure Groupcast:
>>> [E:26349i S:1720 M:2000] (G) Msg RX from 1:000000000001B669 [0000] --- Type 0001:06 (IM:WriteRequest)