# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 62.2.2. [TC-PS-2.2] Event reporting with server as DUT

PICS:
    - PS.S

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Precondition"
      verification: |
          This test case is verified after the device is provisioned. Pls provision device first, Pass appropriate nodeID in the below command
      disabled: true

    - label: "Step 1: Commission DUT to TH"
      verification: |

      disabled: true

    - label: "Step 2a: Bring the DUT into a state without any wired faults."
      PICS: PS.S.A000a
      verification: |

      disabled: true

    - label: "Step 2b: TH reads the ActiveWiredFaults attribute from the DUT"
      verification: |
          Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE

          ./chip-tool powersource read active-wired-faults 1 1

          Verify on TH logs:
          General error: 0x86 (UNSUPPORTED_ATTRIBUTE)
      disabled: true

    - label: "Step 3a: Set up subscription to WiredFaultChange event"
      PICS: PS.S.E00 && PS.S.M.ManualWiredFault
      verification: |
          Please use Interactive mode to Verify subscription test step
          Here the command to enter interactive mode:--   ./chip-tool interactive start

          >>> powersource subscribe-event-by-id 0 2 20 1 1


          Verify on the TH Log

          [1678874350.531309][348369:348369] CHIP:DMG: SubscribeRequestMessage =
          [1678874350.531317][348369:348369] CHIP:DMG: {
          [1678874350.531323][348369:348369] CHIP:DMG:         KeepSubscriptions = false,
          [1678874350.531331][348369:348369] CHIP:DMG:         MinIntervalFloorSeconds = 0x2,
          [1678874350.531339][348369:348369] CHIP:DMG:         MaxIntervalCeilingSeconds = 0x14,
          [1678874350.531345][348369:348369] CHIP:DMG:         EventPathIBs =
          [1678874350.531356][348369:348369] CHIP:DMG:         [
          [1678874350.531363][348369:348369] CHIP:DMG:                 EventPath =
          [1678874350.531371][348369:348369] CHIP:DMG:                 {
          [1678874350.531383][348369:348369] CHIP:DMG:                         Endpoint = 0x1,
          [1678874350.531391][348369:348369] CHIP:DMG:                         Cluster = 0x2f,
          [1678874350.531399][348369:348369] CHIP:DMG:                         Event = 0x0,
          [1678874350.531406][348369:348369] CHIP:DMG:                 },
          [1678874350.531415][348369:348369] CHIP:DMG:
          [1678874350.531421][348369:348369] CHIP:DMG:         ],
          [1678874350.531432][348369:348369] CHIP:DMG:
          [1678874350.531440][348369:348369] CHIP:DMG:         isFabricFiltered = true,
          [1678874350.531449][348369:348369] CHIP:DMG:         InteractionModelRevision = 1
          [1678874350.531455][348369:348369] CHIP:DMG: },
          [1678874350.531490][348369:348369] CHIP:DMG: Final negotiated min/max parameters: Min = 2s, Max = 20s

          [1678874350.531517][348369:348369] CHIP:DMG: IM RH moving to [GeneratingReports]
          MessageCounter:108699985 from Retrans Table on exchange 59500r
          [1678874350.533233][348369:348369] CHIP:DMG: StatusResponseMessage =
          [1678874350.533243][348369:348369] CHIP:DMG: {
          [1678874350.533251][348369:348369] CHIP:DMG:         Status = 0x00 (SUCCESS),
          [1678874350.533258][348369:348369] CHIP:DMG:         InteractionModelRevision = 1
          [1678874350.533264][348369:348369] CHIP:DMG: }
          [1678874350.533271][348369:348369] CHIP:IM: Received status response, status is 0x00 (SUCCESS)
      disabled: true

    - label: "Step 3b: Bring the DUT into a wired fault state."
      PICS: PS.S.E00 && PS.S.M.ManualWiredFault
      verification: |
          DUT ACTION REQUIRED
      disabled: true

    - label: "Step 4: TH reads the ActiveWiredFaults attribute from the DUT"
      PICS: PS.S.A000a && PS.S.M.ManualWiredFault
      verification: |
          Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE

          ./chip-tool powersource read active-wired-faults 1 1

          Verify on the TH Log:

          General error: 0x86 (UNSUPPORTED_ATTRIBUTE)
      disabled: true

    - label:
          "Step 5: The Current field of Step 3b has to be the same as the value
          of Step 4."
      PICS: PS.S.E00 && PS.S.A000a && PS.S.M.ManualWiredFault
      verification: |

      disabled: true

    - label: "Step 6: Bring the DUT back into a clean state."
      PICS: PS.S.E00 && PS.S.M.ManualWiredFault
      verification: |
          DUT ACTION REQUIRED
      disabled: true

    - label: "Step 7a: Bring the DUT into a state without any battery faults."
      PICS: PS.S.A0012
      verification: |

      disabled: true

    - label: "Step 7b: TH reads the ActiveBatFaults attribute from the DUT"
      verification: |
          Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE

          ./chip-tool powersource read active-bat-faults 12345 1

          Verify on the TH Log:

          General error: 0x86 (UNSUPPORTED_ATTRIBUTE)
      disabled: true

    - label: "Step 8a: Set up subscription to BatFaultChange event"
      PICS: PS.S.E01 && PS.S.M.ManualBatFault
      verification: |
          Please use Interactive mode to Verify subscription test step
          Here the command to enter interactive mode:--   ./chip-tool interactive start


          powersource subscribe-event-by-id 1 0 100 1  1
          Verify on the TH Log:

          [1678874454.354931][348369:348369] CHIP:DMG: SubscribeRequestMessage =
          [1678874454.354939][348369:348369] CHIP:DMG: {
          [1678874454.354947][348369:348369] CHIP:DMG:         KeepSubscriptions = false,
          [1678874454.354955][348369:348369] CHIP:DMG:         MinIntervalFloorSeconds = 0x0,
          [1678874454.354962][348369:348369] CHIP:DMG:         MaxIntervalCeilingSeconds = 0x64,
          [1678874454.354972][348369:348369] CHIP:DMG:         EventPathIBs =
          [1678874454.354979][348369:348369] CHIP:DMG:         [
          [1678874454.354986][348369:348369] CHIP:DMG:                 EventPath =
          [1678874454.354995][348369:348369] CHIP:DMG:                 {
          [1678874454.355007][348369:348369] CHIP:DMG:                         Endpoint = 0x1,
          [1678874454.355016][348369:348369] CHIP:DMG:                         Cluster = 0x2f,
          [1678874454.355024][348369:348369] CHIP:DMG:                         Event = 0x1,
          [1678874454.355031][348369:348369] CHIP:DMG:                 },
          [1678874454.355039][348369:348369] CHIP:DMG:
          [1678874454.355046][348369:348369] CHIP:DMG:         ],
          [1678874454.355053][348369:348369] CHIP:DMG:
          [1678874454.355061][348369:348369] CHIP:DMG:         isFabricFiltered = true,
          [1678874454.355068][348369:348369] CHIP:DMG:         InteractionModelRevision = 1
          [1678874454.355074][348369:348369] CHIP:DMG: },
          [1678874454.355109][348369:348369] CHIP:DMG: Final negotiated min/max parameters: Min = 0s, Max = 100s

          [1678874454.357156][348369:348369] CHIP:DMG: StatusResponseMessage =
          [1678874454.357165][348369:348369] CHIP:DMG: {
          [1678874454.357174][348369:348369] CHIP:DMG:         Status = 0x00 (SUCCESS),
          [1678874454.357182][348369:348369] CHIP:DMG:         InteractionModelRevision = 1
          [1678874454.357188][348369:348369] CHIP:DMG: }
          [1678874454.357197][348369:348369] CHIP:IM: Received status response, status is 0x00 (SUCCESS)
          [1678874454.357215][348369:348369] CHIP:DMG: Refresh Subscribe Sync Timer with min 0 seconds and max 100 seconds
          [1678874454.357251][348369:348369] CHIP:EM: <<< [E:59501r S:3659 M:108699998 (Ack:239522570)] (S) Msg TX to 1:00
      disabled: true

    - label: "Step 8b: Bring the DUT into a battery fault state."
      PICS: PS.S.E01 && PS.S.M.ManualBatFault
      verification: |
          DUT ACTION REQUIRED
      disabled: true

    - label: "Step 9: TH reads the ActiveBatFaults attribute from the DUT"
      PICS: PS.S.A0012 && PS.S.M.ManualBatFault
      verification: |
          Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE

          ./chip-tool powersource read active-bat-faults 1 1

          Verify on the TH Log:
          General error: 0x86 (UNSUPPORTED_ATTRIBUTE)
      disabled: true

    - label: "Step 11: Bring the DUT back into a clean state."
      PICS: PS.S.E01 && PS.S.M.ManualBatFault
      verification: |
          DUT ACTION REQUIRED
      disabled: true

    - label: "Step 12a: Bring the DUT into a state without any charge faults."
      PICS: PS.S.A001e
      verification: |

      disabled: true

    - label:
          "Step 12b: TH reads the ActiveBatChargeFaults attribute from the DUT"
      PICS: PS.S.A001e
      verification: |
          Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE

          ./chip-tool powersource read active-bat-charge-faults 1 1

          Verify on the TH Log:
          General error: 0x86 (UNSUPPORTED_ATTRIBUTE)
      disabled: true

    - label: "Step 13a: Set up subscription to BatChargeFaultChange event"
      PICS: PS.S.E02 && PS.S.M.ManualBatChargeFault
      verification: |
          ./chip-tool interactive start

            powersource subscribe-event-by-id 2 100 1000 1 1

            Verify on the TH Log:

          [1678874515.570452][348369:348369] CHIP:DMG: SubscribeRequestMessage =
          [1678874515.570455][348369:348369] CHIP:DMG: {
          [1678874515.570457][348369:348369] CHIP:DMG: 	KeepSubscriptions = false,
          [1678874515.570460][348369:348369] CHIP:DMG: 	MinIntervalFloorSeconds = 0x64,
          [1678874515.570464][348369:348369] CHIP:DMG: 	MaxIntervalCeilingSeconds = 0x3e8,
          [1678874515.570466][348369:348369] CHIP:DMG: 	EventPathIBs =
          [1678874515.570469][348369:348369] CHIP:DMG: 	[
          [1678874515.570472][348369:348369] CHIP:DMG: 		EventPath =
          [1678874515.570475][348369:348369] CHIP:DMG: 		{
          [1678874515.570478][348369:348369] CHIP:DMG: 			Endpoint = 0x1,
          [1678874515.570481][348369:348369] CHIP:DMG: 			Cluster = 0x2f,
          [1678874515.570484][348369:348369] CHIP:DMG: 			Event = 0x2,
          [1678874515.570487][348369:348369] CHIP:DMG: 		},
          [1678874515.570490][348369:348369] CHIP:DMG:
          [1678874515.570492][348369:348369] CHIP:DMG: 	],
          [1678874515.570495][348369:348369] CHIP:DMG:
          [1678874515.570498][348369:348369] CHIP:DMG: 	isFabricFiltered = true,
          [1678874515.570501][348369:348369] CHIP:DMG: 	InteractionModelRevision = 1
          [1678874515.570503][348369:348369] CHIP:DMG: },
          [1678874515.570517][348369:348369] CHIP:DMG: Final negotiated min/max parameters: Min = 100s, Max = 1000s


          MessageCounter:243065879 from Retrans Table on exchange 59503r
          [1678874515.571146][348369:348369] CHIP:DMG: StatusResponseMessage =
          [1678874515.571148][348369:348369] CHIP:DMG: {
          [1678874515.571150][348369:348369] CHIP:DMG: 	Status = 0x00 (SUCCESS),
          [1678874515.571152][348369:348369] CHIP:DMG: 	InteractionModelRevision = 1
          [1678874515.571154][348369:348369] CHIP:DMG: }
          [1678874515.571157][348369:348369] CHIP:IM: Received status response, status is 0x00 (SUCCESS)
      disabled: true

    - label: "Step 13b: Bring the DUT into a charge fault state."
      PICS: PS.S.E02 && PS.S.M.ManualBatChargeFault
      verification: |
          DUT ACTION REQUIRED
      disabled: true

    - label:
          "Step 14: TH reads the ActiveBatChargeFaults attribute from the DUT"
      PICS: PS.S.A001e && PS.M.ManualBatChargeFault
      verification: |
          Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE

          ./chip-tool powersource read active-bat-charge-faults 1 1

          Verify on the TH Log:
          General error: 0x86 (UNSUPPORTED_ATTRIBUTE)
      disabled: true

    - label:
          "Step 5: The Current field of Step 13b has to be the same as the value
          of Step 14."
      PICS: PS.S.E02 && PS.S.A001e && PS.S.M.ManualWiredFault
      verification: |

      disabled: true

    - label: "Step 16: Bring the DUT back into a clean state."
      PICS: PS.S.E02 && PS.S.M.ManualBatChargeFault
      verification: |
          DUT ACTION REQUIRED
      disabled: true