# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 219.2.1. [TC-TCCM-2.1] ChangeToMode verification with DUT as Server

PICS:
    - TCCM.S

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label:
          "Step 1: Commission DUT to TH (can be skipped if done in a preceding
          test)."
      verification: |

      disabled: true

    - label: "Step 2: TH reads from the DUT the SupportedModes attribute."
      PICS: TCCM.S.A0000
      verification: |
          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode read supported-modes 1 1

          Verify that the DUT response contains list of ModeOptionsStruct entries
          - Verify that the list has two or more entries
          - Verify that PIXIT.TCCM.MODE_CHANGE_FAIL is one of supported_modes_dut
          - Save the Mode field values as supported_modes_dut on the TH (Chip-tool) and below is the sample log provided for the raspi platform:

          [1690189665.585798][16159:16161] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Attribute 0x0000_0000 DataVersion: 473867547
          [1690189665.585885][16159:16161] CHIP:TOO:   SupportedModes: 3 entries
          [1690189665.585924][16159:16161] CHIP:TOO:     [1]: {
          [1690189665.585936][16159:16161] CHIP:TOO:       Label: Normal
          [1690189665.585955][16159:16161] CHIP:TOO:       Mode: 0
          [1690189665.585970][16159:16161] CHIP:TOO:       ModeTags: 1 entries
          [1690189665.585997][16159:16161] CHIP:TOO:         [1]: {
          [1690189665.586008][16159:16161] CHIP:TOO:           Value: 0
          [1690189665.586018][16159:16161] CHIP:TOO:          }
          [1690189665.586028][16159:16161] CHIP:TOO:      }
          [1690189665.586050][16159:16161] CHIP:TOO:     [2]: {
          [1690189665.586060][16159:16161] CHIP:TOO:       Label: Rapid Cool
          [1690189665.586068][16159:16161] CHIP:TOO:       Mode: 1
          [1690189665.586081][16159:16161] CHIP:TOO:       ModeTags: 1 entries
          [1690189665.586094][16159:16161] CHIP:TOO:         [1]: {
          [1690189665.586105][16159:16161] CHIP:TOO:           Value: 16384
          [1690189665.586114][16159:16161] CHIP:TOO:          }
          [1690189665.586124][16159:16161] CHIP:TOO:      }
          [1690189665.586143][16159:16161] CHIP:TOO:     [3]: {
          [1690189665.586152][16159:16161] CHIP:TOO:       Label: Rapid Freeze
          [1690189665.586162][16159:16161] CHIP:TOO:       Mode: 2
          [1690189665.586175][16159:16161] CHIP:TOO:       ModeTags: 1 entries
          [1690189665.586189][16159:16161] CHIP:TOO:         [1]: {
          [1690189665.586198][16159:16161] CHIP:TOO:           Value: 16385
          [1690189665.586207][16159:16161] CHIP:TOO:          }
          [1690189665.586217][16159:16161] CHIP:TOO:      }
      disabled: true

    - label: "Step 3: TH reads from the DUT the CurrentMode attribute."
      PICS: TCCM.S.A0001
      verification: |
          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode read current-mode 1 1

          Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer  value,
          - Save the value as old_current_mode_dut
          - Select a value which is NOT in supported_modes_dut and save it as invalid_mode_th,  below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0

          [1690189753.281932][16180:16182] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Attribute 0x0000_0001 DataVersion: 473867547
          [1690189753.281979][16180:16182] CHIP:TOO:   CurrentMode: 0
      disabled: true

    - label:
          "Step 4: TH sends a ChangeToMode command to the DUT with NewMode set
          to old_current_mode_dut"
      PICS: TCCM.S.C00.Rsp
      verification: |
          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode change-to-mode 0 1 1

          Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with a SUCCESS (value 0x00) status response and below is the sample log provided for the raspi platform:

          [1689991627.698450][142731:142733] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Command 0x0000_0001
          [1689991627.698488][142731:142733] CHIP:TOO:   ChangeToModeResponse: {
          [1689991627.698499][142731:142733] CHIP:TOO:     status: 0
          [1689991627.698507][142731:142733] CHIP:TOO:    }
      disabled: true

    - label:
          "Step 5: Manually put the device in a state from which it will FAIL to
          transition to PIXIT.TCCM.MODE_CHANGE_FAIL"
      PICS: TCCM.S.M.CAN_TEST_MODE_FAILURE && TCCM.S.M.CAN_MANUALLY_CONTROLLED
      verification: |
          Manual operation required
      disabled: true

    - label: "Step 6: TH reads from the DUT the CurrentMode attribute."
      PICS: TCCM.S.A0001 && TCCM.S.M.CAN_MANUALLY_CONTROLLED
      verification: |
          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode read current-mode 1 1

          Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer  value,
          - Save the value as old_current_mode_dut, below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0

          [1689991744.646114][142740:142742] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Attribute 0x0000_0001 DataVersion: 2299631070
          [1689991744.646165][142740:142742] CHIP:TOO:   CurrentMode: 0
      disabled: true

    - label:
          "Step 7: TH sends a ChangeToMode command to the DUT with NewMode set
          to PIXIT.TCCM.MODE_CHANGE_FAIL"
      PICS: TCCM.S.M.CAN_TEST_MODE_FAILURE && TCCM.S.C00.Rsp
      verification: |
          Note : Please skip this step as SDK is not enabled with this failure response

          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode change-to-mode 2 1 1

          Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with a GenericFailure(0x02)  status response and below is the sample log provided for the raspi platform:

          [1690208444.427313][19616:19618] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Command 0x0000_0001
          [1690208444.427473][19616:19618] CHIP:TOO:   ChangeToModeResponse: {
          [1690208444.427482][19616:19618] CHIP:TOO:     status: 0
          [1690208444.427486][19616:19618] CHIP:TOO:    }
      disabled: true

    - label: "Step 8: TH reads from the DUT the CurrentMode attribute."
      PICS: TCCM.S.A0001
      verification: |
          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode read current-mode 1 1

          Verify on TH(chip-tool),  CurrentMode attribute value is an integer value and equal to old_current_mode_dut  below is the sample log provided for the raspi platform,Here CurrentMode attribute value is 0

          [1689991744.646114][142740:142742] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Attribute 0x0000_0001 DataVersion: 2299631070
          [1689991744.646165][142740:142742] CHIP:TOO:   CurrentMode: 0
      disabled: true

    - label:
          "Step 9: Manually put the device in a state from which it will
          SUCCESSFULLY transition to PIXIT.TCCM.MODE_CHANGE_OK"
      PICS: TCCM.S.M.CAN_MANUALLY_CONTROLLED
      verification: |
          Manual operation required
      disabled: true

    - label: "Step 10: TH reads from the DUT the CurrentMode attribute."
      PICS: TCCM.S.A0001 && TCCM.S.M.CAN_MANUALLY_CONTROLLED
      verification: |
          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode read current-mode 1 1

          Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer  value,
          - Save the value as old_current_mode_dut, below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0

          [1689991744.646114][142740:142742] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Attribute 0x0000_0001 DataVersion: 2299631070
          [1689991744.646165][142740:142742] CHIP:TOO:   CurrentMode: 0
      disabled: true

    - label:
          "Step 11: TH sends a ChangeToMode command to the DUT with NewMode set
          to PIXIT.TCCM.MODE_CHANGE_OK"
      PICS: TCCM.S.C00.Rsp
      verification: |
          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode change-to-mode 1 1 1

          Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with a SUCCESS (value 0x00) status response and below is the sample log provided for the raspi platform:

          [1690189985.803199][16357:16359] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Command 0x0000_0001
          [1690189985.803213][16357:16359] CHIP:TOO:   ChangeToModeResponse: {
          [1690189985.803220][16357:16359] CHIP:TOO:     status: 0
          [1690189985.803224][16357:16359] CHIP:TOO:    }
      disabled: true

    - label: "Step 12: TH reads from the DUT the CurrentMode attribute."
      PICS: TCCM.S.A0001
      verification: |
          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode read current-mode 1 1

          Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer  value and same as step 11,  below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 1

          [1690190007.564500][16361:16363] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Attribute 0x0000_0001 DataVersion: 473867552
          [1690190007.564538][16361:16363] CHIP:TOO:   CurrentMode: 1
      disabled: true

    - label:
          "Step 13: TH sends a ChangeToMode command to the DUT with NewMode set
          to invalid_mode_th"
      PICS: TCCM.S.C00.Rsp
      verification: |
          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode change-to-mode 3 1 1

          Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with a UnsupportedMode(0x01) status response and below is the sample log provided for the raspi platform:

          [1690190041.868458][16365:16367] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Command 0x0000_0001
          [1690190041.868514][16365:16367] CHIP:TOO:   ChangeToModeResponse: {
          [1690190041.868518][16365:16367] CHIP:TOO:     status: 1
          [1690190041.868521][16365:16367] CHIP:TOO:    }
      disabled: true

    - label: "Step 14: TH reads from the DUT the CurrentMode attribute."
      PICS: TCCM.S.A0001
      verification: |
          ./chip-tool refrigeratorandtemperaturecontrolledcabinetmode read current-mode 1 1

          Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer  value and same as step 12,  below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 1

          [1690190081.598522][16369:16371] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0052 Attribute 0x0000_0001 DataVersion: 473867552
          [1690190081.598595][16369:16371] CHIP:TOO:   CurrentMode: 1
      disabled: true