src/app/util/config.h - third_party/github/project-chip/connectedhomeip - Git at Google

 /**
  *
  *    Copyright (c) 2020 Project CHIP Authors
  *
  *    Licensed under the Apache License, Version 2.0 (the "License");
  *    you may not use this file except in compliance with the License.
  *    You may obtain a copy of the License at
  *
  *        http://www.apache.org/licenses/LICENSE-2.0
  *
  *    Unless required by applicable law or agreed to in writing, software
  *    distributed under the License is distributed on an "AS IS" BASIS,
  *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  *    See the License for the specific language governing permissions and
  *    limitations under the License.
  */

 /**
  *
  *    Copyright (c) 2020 Silicon Labs
  *
  *    Licensed under the Apache License, Version 2.0 (the "License");
  *    you may not use this file except in compliance with the License.
  *    You may obtain a copy of the License at
  *
  *        http://www.apache.org/licenses/LICENSE-2.0
  *
  *    Unless required by applicable law or agreed to in writing, software
  *    distributed under the License is distributed on an "AS IS" BASIS,
  *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  *    See the License for the specific language governing permissions and
  *    limitations under the License.
  */
 /***************************************************************************/
 /**
  * @brief This file is the main configuration settings
  *for the Zigbee app. The zigbee app can become a Home
  *Automation (HA) device, a Smart Energy (SE) device,
  *or a Custom Zigbee device.
  *
  * This application can be configured using
  *AppBuilder. AppBuilder generates a file containing
  *defines that setup what pieces of the code is used
  *(which clusters, security settings, zigbee device
  *type, serial port, etc). These defines are added to
  *a new file and included by setting
  *ZA_GENERATED_HEADER to the new filename so these
  *defines are sourced first.
  *
  * This file also contains default values for the
  *defines so some can be set by the user but defaults
  *are always available.
  *******************************************************************************
  * # License
  * <b>Copyright 2018 Silicon Laboratories, Inc.
  *www.silabs.com</b>
  *******************************************************************************
  *
  * The licensor of this software is Silicon
  *Laboratories Inc.  Your use of this software is
  *governed by the terms of  Silicon Labs Master
  *Software License Agreement (MSLA) available at
  * www.silabs.com/about-us/legal/master-software-license-agreement.
  *This software  is distributed to you in Source Code
  *format and is governed by the sections of the MSLA
  *applicable to Source Code.
  *
  ******************************************************************************/

 #pragma once

 // include generated configuration information from AppBuilder.
 // ZA_GENERATED_HEADER is defined in the project file
 #ifdef ZA_GENERATED_HEADER
 #include ZA_GENERATED_HEADER
 #else
 #include "gen/gen_config.h"
 #endif

 #ifdef ATTRIBUTE_STORAGE_CONFIGURATION
 #include ATTRIBUTE_STORAGE_CONFIGURATION
 #else
 #include "gen/endpoint_config.h"
 #endif

 #include "gen/gen_tokens.h" // For GENERATED_TOKEN_LOADER/SAVER macros

 // *******************************************************************
 // pre-defined Devices
 //
 // use these to determine which type of device the current application is.
 // do not use the EMBER_* versions from ember-types.h as these are in an
 // enum and are not available at preprocessor time. These need to be set
 // before the devices are loaded from ha-devices.h and se-devices.h
 #define ZA_COORDINATOR 1
 #define ZA_ROUTER 2
 #define ZA_END_DEVICE 3
 #define ZA_SLEEPY_END_DEVICE 4

 // A subtle distniction:
 //   EMBER_AF_MANUFACTURER_CODE is the MFG code set by AppBuilder
 //     for use in the App Framework (AF).  If not set by AppBuilder we default
 //     it to 0x0000. The customer should be setting this value.
 //   EMBER_COMPANY_MANUFACTURER_CODE is the Ember Corporation's Manufacturer
 //     ID allocated by the Zigbee alliance.  This shall not change.
 #define EMBER_COMPANY_MANUFACTURER_CODE 0x1002
 #ifndef EMBER_AF_MANUFACTURER_CODE
 #define EMBER_AF_MANUFACTURER_CODE 0x0000
 #endif

 // This file determines the security profile used, and from that various
 // other security parameters.
 // #include "app/framework/security/security-config.h"

 // *******************************************************************
 // Application configuration of RAM for cluster usage
 //
 // This section defines constants that size the tables used by the cluster
 // code.

 // This is the max hops that the network can support - used to determine
 // the max source route overhead and broadcast radius
 // if we havent defined MAX_HOPS then define based on profile ID
 #ifndef ZA_MAX_HOPS
 #define ZA_MAX_HOPS 12
 #endif

 #ifndef EMBER_AF_SOURCE_ROUTING_RESERVED_PAYLOAD_LENGTH
 #define EMBER_AF_SOURCE_ROUTING_RESERVED_PAYLOAD_LENGTH 0
 #endif

 // The maximum APS payload, not including any APS options.  This value is also
 // available from emberMaximumApsPayloadLength() or ezspMaximumPayloadLength().
 // See http://portal.ember.com/faq/payload for more information.
 #define EMBER_AF_MAXIMUM_APS_PAYLOAD_LENGTH 82 - EMBER_AF_SOURCE_ROUTING_RESERVED_PAYLOAD_LENGTH

 // Max PHY size = 128
 //   -1 byte for PHY length
 //   -2 bytes for MAC CRC
 #define EMBER_AF_MAXIMUM_INTERPAN_LENGTH 125

 // The additional overhead required for APS encryption (security = 5, MIC = 4).
 #define EMBER_AF_APS_ENCRYPTION_OVERHEAD 9

 // The additional overhead required for APS fragmentation.
 #define EMBER_AF_APS_FRAGMENTATION_OVERHEAD 2

 // The additional overhead required for network source routing (relay count = 1,
 // relay index = 1).  This does not include the size of the relay list itself.
 #define EMBER_AF_NWK_SOURCE_ROUTE_OVERHEAD 2

 // The additional overhead required per relay address for network source
 // routing.  This is in addition to the overhead defined above.
 #define EMBER_AF_NWK_SOURCE_ROUTE_PER_RELAY_ADDRESS_OVERHEAD 2

 // defines the largest size payload allowed to send and receive. This
 // affects the payloads generated from the CLI and the payloads generated
 // as responses.
 // Maximum payload length.
 // If fragmenation is enabled, and fragmentation length is bigger than default, then use that
 #if defined(EMBER_AF_PLUGIN_FRAGMENTATION) && (EMBER_AF_PLUGIN_FRAGMENTATION_BUFFER_SIZE > EMBER_AF_MAXIMUM_APS_PAYLOAD_LENGTH)
 #define EMBER_AF_MAXIMUM_SEND_PAYLOAD_LENGTH EMBER_AF_PLUGIN_FRAGMENTATION_BUFFER_SIZE
 #define EMBER_AF_INCOMING_BUFFER_LENGTH EMBER_AF_PLUGIN_FRAGMENTATION_BUFFER_SIZE
 #else
 #define EMBER_AF_MAXIMUM_SEND_PAYLOAD_LENGTH EMBER_AF_MAXIMUM_APS_PAYLOAD_LENGTH
 #define EMBER_AF_INCOMING_BUFFER_LENGTH EMBER_AF_MAXIMUM_APS_PAYLOAD_LENGTH
 #endif

 // *******************************************************************
 // Application configuration of Flash
 //
 // This section gives the application options for turning on or off
 // features that affect the amount of flash used.

 // *******************************************************************
 // Defines needed for enabling security
 //

 // Our stack profile is 2 (ZigBee Pro).
 #define EMBER_STACK_PROFILE 2

 // *******************************************************************
 // Application Handlers
 //
 // By default, a number of stub handlers are automatically provided
 // that have no effect.  If the application would like to implement any
 // of these handlers itself, it needs to define the appropriate macro

 #define EMBER_APPLICATION_HAS_REMOTE_BINDING_HANDLER
 #define EMBER_APPLICATION_HAS_ENERGY_SCAN_RESULT_HANDLER
 #define EMBER_APPLICATION_HAS_GET_ENDPOINT
 #define EMBER_APPLICATION_HAS_TRUST_CENTER_JOIN_HANDLER
 #define EMBER_APPLICATION_HAS_BUTTON_HANDLER
 #define EMBER_APPLICATION_HAS_ZIGBEE_KEY_ESTABLISHMENT_HANDLER

 #define EZSP_APPLICATION_HAS_ENERGY_SCAN_RESULT_HANDLER
 #define EZSP_APPLICATION_HAS_INCOMING_SENDER_EUI64_HANDLER
 #define EZSP_APPLICATION_HAS_TRUST_CENTER_JOIN_HANDLER
 #define EZSP_APPLICATION_HAS_BUTTON_HANDLER
 #define EZSP_APPLICATION_HAS_ZIGBEE_KEY_ESTABLISHMENT_HANDLER

 #ifndef EMBER_AF_MESSAGE_SENT_CALLBACK_TABLE_SIZE
 #define EMBER_AF_MESSAGE_SENT_CALLBACK_TABLE_SIZE EMBER_APS_UNICAST_MESSAGE_COUNT
 #endif // EMBER_AF_MESSAGE_SENT_CALLBACK_TABLE_SIZE

 #define EMBER_APPLICATION_HAS_COMMAND_ACTION_HANDLER

 // *******************************************************************
 // Default values for required defines
 //

 // define the serial port that the application uses to be 1 if this is not set
 #ifndef HAL_CONFIG // HAL Config handles serial port allocation
 #ifndef APP_SERIAL
 #define APP_SERIAL 1
 #endif
 #ifdef EMBER_TEST
 #include "app/util/ezsp/uart-simulation-remap.h"
 #endif
 #endif

 // The address table plugin is enabled by default. If it gets disabled for some
 // reason, we still need to define these #defines to some default value.
 #ifndef EMBER_AF_PLUGIN_ADDRESS_TABLE
 #define EMBER_AF_PLUGIN_ADDRESS_TABLE_SIZE 2
 #define EMBER_AF_PLUGIN_ADDRESS_TABLE_TRUST_CENTER_CACHE_SIZE 2
 #endif

 // The total size of the address table is the size of the section used by the
 // application plus the size of section used for the trust center address cache.
 // The NCP allows each section to be sized independently, but the SOC requires
 // a single configuration for the whole table.
 #ifndef EMBER_ADDRESS_TABLE_SIZE
 #define EMBER_ADDRESS_TABLE_SIZE (EMBER_AF_PLUGIN_ADDRESS_TABLE_SIZE + EMBER_AF_PLUGIN_ADDRESS_TABLE_TRUST_CENTER_CACHE_SIZE)
 #endif

 #ifndef EMBER_AF_DEFAULT_APS_OPTIONS
 // BUGZID 12261: Concentrators use MTORRs for route discovery and should not
 // enable route discovery in the APS options.
 #ifdef EMBER_AF_PLUGIN_CONCENTRATOR
 #define EMBER_AF_DEFAULT_APS_OPTIONS (EMBER_APS_OPTION_RETRY | EMBER_APS_OPTION_ENABLE_ADDRESS_DISCOVERY)
 #else
 #define EMBER_AF_DEFAULT_APS_OPTIONS                                                                                               \
     (EMBER_APS_OPTION_RETRY | EMBER_APS_OPTION_ENABLE_ROUTE_DISCOVERY | EMBER_APS_OPTION_ENABLE_ADDRESS_DISCOVERY)
 #endif
 #endif

 // *******************************************************************
 // // Default values for required defines
 // //

 #ifdef EMBER_AF_DEFAULT_RESPONSE_POLICY_NEVER
 #define EMBER_AF_DEFAULT_RESPONSE_POLICY_REQUESTS ZCL_DISABLE_DEFAULT_RESPONSE_MASK
 #define EMBER_AF_DEFAULT_RESPONSE_POLICY_RESPONSES ZCL_DISABLE_DEFAULT_RESPONSE_MASK
 #elif defined(EMBER_AF_DEFAULT_RESPONSE_POLICY_CONDITIONAL)
 #define EMBER_AF_DEFAULT_RESPONSE_POLICY_REQUESTS 0
 #define EMBER_AF_DEFAULT_RESPONSE_POLICY_RESPONSES ZCL_DISABLE_DEFAULT_RESPONSE_MASK
 #else
 #define EMBER_AF_DEFAULT_RESPONSE_POLICY_REQUESTS 0
 #define EMBER_AF_DEFAULT_RESPONSE_POLICY_RESPONSES 0
 #endif // EMBER_AF_DEFAULT_RESPONSE_POLICY_NEVER

 #ifdef EMBER_AF_CUSTOM_NETWORK_INIT_OPTIONS
 #ifdef EMBER_AF_USE_STANDARD_NETWORK_INIT
 #error "Custom options cannot be used with the standard network init"
 #endif
 #else
 // We always want to store our parent info in a token. This prevents doing an
 // orphan scan upon reboot, which can suffer from the multiple-parent-
 // responses issue
 #define EMBER_AF_CUSTOM_NETWORK_INIT_OPTIONS (EMBER_NETWORK_INIT_PARENT_INFO_IN_TOKEN | Z3_NETWORK_INIT_BEHAVIOR)
 #endif // EMBER_AF_CUSTOM_NETWORK_INIT_OPTIONS

 /**
  * @brief CHIP uses millisecond ticks
  */
 #define MILLISECOND_TICKS_PER_SECOND 1000
	/**
	*
	* Copyright (c) 2020 Project CHIP Authors
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	/**
	*
	* Copyright (c) 2020 Silicon Labs
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	/***************************************************************************/
	/**
	* @brief This file is the main configuration settings
	*for the Zigbee app. The zigbee app can become a Home
	*Automation (HA) device, a Smart Energy (SE) device,
	*or a Custom Zigbee device.
	*
	* This application can be configured using
	*AppBuilder. AppBuilder generates a file containing
	*defines that setup what pieces of the code is used
	*(which clusters, security settings, zigbee device
	*type, serial port, etc). These defines are added to
	*a new file and included by setting
	*ZA_GENERATED_HEADER to the new filename so these
	*defines are sourced first.
	*
	* This file also contains default values for the
	*defines so some can be set by the user but defaults
	*are always available.
	*******************************************************************************
	* # License
	* <b>Copyright 2018 Silicon Laboratories, Inc.
	*www.silabs.com</b>
	*******************************************************************************
	*
	* The licensor of this software is Silicon
	*Laboratories Inc. Your use of this software is
	*governed by the terms of Silicon Labs Master
	*Software License Agreement (MSLA) available at
	* www.silabs.com/about-us/legal/master-software-license-agreement.
	*This software is distributed to you in Source Code
	*format and is governed by the sections of the MSLA
	*applicable to Source Code.
	*
	******************************************************************************/

	#pragma once

	// include generated configuration information from AppBuilder.
	// ZA_GENERATED_HEADER is defined in the project file
	#ifdef ZA_GENERATED_HEADER
	#include ZA_GENERATED_HEADER
	#else
	#include "gen/gen_config.h"
	#endif

	#ifdef ATTRIBUTE_STORAGE_CONFIGURATION
	#include ATTRIBUTE_STORAGE_CONFIGURATION
	#else
	#include "gen/endpoint_config.h"
	#endif

	#include "gen/gen_tokens.h" // For GENERATED_TOKEN_LOADER/SAVER macros

	// *******************************************************************
	// pre-defined Devices
	//
	// use these to determine which type of device the current application is.
	// do not use the EMBER_* versions from ember-types.h as these are in an
	// enum and are not available at preprocessor time. These need to be set
	// before the devices are loaded from ha-devices.h and se-devices.h
	#define ZA_COORDINATOR 1
	#define ZA_ROUTER 2
	#define ZA_END_DEVICE 3
	#define ZA_SLEEPY_END_DEVICE 4

	// A subtle distniction:
	// EMBER_AF_MANUFACTURER_CODE is the MFG code set by AppBuilder
	// for use in the App Framework (AF). If not set by AppBuilder we default
	// it to 0x0000. The customer should be setting this value.
	// EMBER_COMPANY_MANUFACTURER_CODE is the Ember Corporation's Manufacturer
	// ID allocated by the Zigbee alliance. This shall not change.
	#define EMBER_COMPANY_MANUFACTURER_CODE 0x1002
	#ifndef EMBER_AF_MANUFACTURER_CODE
	#define EMBER_AF_MANUFACTURER_CODE 0x0000
	#endif

	// This file determines the security profile used, and from that various
	// other security parameters.
	// #include "app/framework/security/security-config.h"

	// *******************************************************************
	// Application configuration of RAM for cluster usage
	//
	// This section defines constants that size the tables used by the cluster
	// code.

	// This is the max hops that the network can support - used to determine
	// the max source route overhead and broadcast radius
	// if we havent defined MAX_HOPS then define based on profile ID
	#ifndef ZA_MAX_HOPS
	#define ZA_MAX_HOPS 12
	#endif

	#ifndef EMBER_AF_SOURCE_ROUTING_RESERVED_PAYLOAD_LENGTH
	#define EMBER_AF_SOURCE_ROUTING_RESERVED_PAYLOAD_LENGTH 0
	#endif

	// The maximum APS payload, not including any APS options. This value is also
	// available from emberMaximumApsPayloadLength() or ezspMaximumPayloadLength().
	// See http://portal.ember.com/faq/payload for more information.
	#define EMBER_AF_MAXIMUM_APS_PAYLOAD_LENGTH 82 - EMBER_AF_SOURCE_ROUTING_RESERVED_PAYLOAD_LENGTH

	// Max PHY size = 128
	// -1 byte for PHY length
	// -2 bytes for MAC CRC
	#define EMBER_AF_MAXIMUM_INTERPAN_LENGTH 125

	// The additional overhead required for APS encryption (security = 5, MIC = 4).
	#define EMBER_AF_APS_ENCRYPTION_OVERHEAD 9

	// The additional overhead required for APS fragmentation.
	#define EMBER_AF_APS_FRAGMENTATION_OVERHEAD 2

	// The additional overhead required for network source routing (relay count = 1,
	// relay index = 1). This does not include the size of the relay list itself.
	#define EMBER_AF_NWK_SOURCE_ROUTE_OVERHEAD 2

	// The additional overhead required per relay address for network source
	// routing. This is in addition to the overhead defined above.
	#define EMBER_AF_NWK_SOURCE_ROUTE_PER_RELAY_ADDRESS_OVERHEAD 2

	// defines the largest size payload allowed to send and receive. This
	// affects the payloads generated from the CLI and the payloads generated
	// as responses.
	// Maximum payload length.
	// If fragmenation is enabled, and fragmentation length is bigger than default, then use that
	#if defined(EMBER_AF_PLUGIN_FRAGMENTATION) && (EMBER_AF_PLUGIN_FRAGMENTATION_BUFFER_SIZE > EMBER_AF_MAXIMUM_APS_PAYLOAD_LENGTH)
	#define EMBER_AF_MAXIMUM_SEND_PAYLOAD_LENGTH EMBER_AF_PLUGIN_FRAGMENTATION_BUFFER_SIZE
	#define EMBER_AF_INCOMING_BUFFER_LENGTH EMBER_AF_PLUGIN_FRAGMENTATION_BUFFER_SIZE
	#else
	#define EMBER_AF_MAXIMUM_SEND_PAYLOAD_LENGTH EMBER_AF_MAXIMUM_APS_PAYLOAD_LENGTH
	#define EMBER_AF_INCOMING_BUFFER_LENGTH EMBER_AF_MAXIMUM_APS_PAYLOAD_LENGTH
	#endif

	// *******************************************************************
	// Application configuration of Flash
	//
	// This section gives the application options for turning on or off
	// features that affect the amount of flash used.

	// *******************************************************************
	// Defines needed for enabling security
	//

	// Our stack profile is 2 (ZigBee Pro).
	#define EMBER_STACK_PROFILE 2

	// *******************************************************************
	// Application Handlers
	//
	// By default, a number of stub handlers are automatically provided
	// that have no effect. If the application would like to implement any
	// of these handlers itself, it needs to define the appropriate macro

	#define EMBER_APPLICATION_HAS_REMOTE_BINDING_HANDLER
	#define EMBER_APPLICATION_HAS_ENERGY_SCAN_RESULT_HANDLER
	#define EMBER_APPLICATION_HAS_GET_ENDPOINT
	#define EMBER_APPLICATION_HAS_TRUST_CENTER_JOIN_HANDLER
	#define EMBER_APPLICATION_HAS_BUTTON_HANDLER
	#define EMBER_APPLICATION_HAS_ZIGBEE_KEY_ESTABLISHMENT_HANDLER

	#define EZSP_APPLICATION_HAS_ENERGY_SCAN_RESULT_HANDLER
	#define EZSP_APPLICATION_HAS_INCOMING_SENDER_EUI64_HANDLER
	#define EZSP_APPLICATION_HAS_TRUST_CENTER_JOIN_HANDLER
	#define EZSP_APPLICATION_HAS_BUTTON_HANDLER
	#define EZSP_APPLICATION_HAS_ZIGBEE_KEY_ESTABLISHMENT_HANDLER

	#ifndef EMBER_AF_MESSAGE_SENT_CALLBACK_TABLE_SIZE
	#define EMBER_AF_MESSAGE_SENT_CALLBACK_TABLE_SIZE EMBER_APS_UNICAST_MESSAGE_COUNT
	#endif // EMBER_AF_MESSAGE_SENT_CALLBACK_TABLE_SIZE

	#define EMBER_APPLICATION_HAS_COMMAND_ACTION_HANDLER

	// *******************************************************************
	// Default values for required defines
	//

	// define the serial port that the application uses to be 1 if this is not set
	#ifndef HAL_CONFIG // HAL Config handles serial port allocation
	#ifndef APP_SERIAL
	#define APP_SERIAL 1
	#endif
	#ifdef EMBER_TEST
	#include "app/util/ezsp/uart-simulation-remap.h"
	#endif
	#endif

	// The address table plugin is enabled by default. If it gets disabled for some
	// reason, we still need to define these #defines to some default value.
	#ifndef EMBER_AF_PLUGIN_ADDRESS_TABLE
	#define EMBER_AF_PLUGIN_ADDRESS_TABLE_SIZE 2
	#define EMBER_AF_PLUGIN_ADDRESS_TABLE_TRUST_CENTER_CACHE_SIZE 2
	#endif

	// The total size of the address table is the size of the section used by the
	// application plus the size of section used for the trust center address cache.
	// The NCP allows each section to be sized independently, but the SOC requires
	// a single configuration for the whole table.
	#ifndef EMBER_ADDRESS_TABLE_SIZE
	#define EMBER_ADDRESS_TABLE_SIZE (EMBER_AF_PLUGIN_ADDRESS_TABLE_SIZE + EMBER_AF_PLUGIN_ADDRESS_TABLE_TRUST_CENTER_CACHE_SIZE)
	#endif

	#ifndef EMBER_AF_DEFAULT_APS_OPTIONS
	// BUGZID 12261: Concentrators use MTORRs for route discovery and should not
	// enable route discovery in the APS options.
	#ifdef EMBER_AF_PLUGIN_CONCENTRATOR
	#define EMBER_AF_DEFAULT_APS_OPTIONS (EMBER_APS_OPTION_RETRY \| EMBER_APS_OPTION_ENABLE_ADDRESS_DISCOVERY)
	#else
	#define EMBER_AF_DEFAULT_APS_OPTIONS \
	(EMBER_APS_OPTION_RETRY \| EMBER_APS_OPTION_ENABLE_ROUTE_DISCOVERY \| EMBER_APS_OPTION_ENABLE_ADDRESS_DISCOVERY)
	#endif
	#endif

	// *******************************************************************
	// // Default values for required defines
	// //

	#ifdef EMBER_AF_DEFAULT_RESPONSE_POLICY_NEVER
	#define EMBER_AF_DEFAULT_RESPONSE_POLICY_REQUESTS ZCL_DISABLE_DEFAULT_RESPONSE_MASK
	#define EMBER_AF_DEFAULT_RESPONSE_POLICY_RESPONSES ZCL_DISABLE_DEFAULT_RESPONSE_MASK
	#elif defined(EMBER_AF_DEFAULT_RESPONSE_POLICY_CONDITIONAL)
	#define EMBER_AF_DEFAULT_RESPONSE_POLICY_REQUESTS 0
	#define EMBER_AF_DEFAULT_RESPONSE_POLICY_RESPONSES ZCL_DISABLE_DEFAULT_RESPONSE_MASK
	#else
	#define EMBER_AF_DEFAULT_RESPONSE_POLICY_REQUESTS 0
	#define EMBER_AF_DEFAULT_RESPONSE_POLICY_RESPONSES 0
	#endif // EMBER_AF_DEFAULT_RESPONSE_POLICY_NEVER

	#ifdef EMBER_AF_CUSTOM_NETWORK_INIT_OPTIONS
	#ifdef EMBER_AF_USE_STANDARD_NETWORK_INIT
	#error "Custom options cannot be used with the standard network init"
	#endif
	#else
	// We always want to store our parent info in a token. This prevents doing an
	// orphan scan upon reboot, which can suffer from the multiple-parent-
	// responses issue
	#define EMBER_AF_CUSTOM_NETWORK_INIT_OPTIONS (EMBER_NETWORK_INIT_PARENT_INFO_IN_TOKEN \| Z3_NETWORK_INIT_BEHAVIOR)
	#endif // EMBER_AF_CUSTOM_NETWORK_INIT_OPTIONS

	/**
	* @brief CHIP uses millisecond ticks
	*/
	#define MILLISECOND_TICKS_PER_SECOND 1000