Activating environment
source ./scripts/activate.sh
Generating tizen-arm-light
gn gen --check \ --fail-on-unused-args \ --export-compile-commands \ --root=$PW_PROJECT_ROOT/examples/lighting-app/tizen \ "--args=target_os=\"tizen\" target_cpu=\"arm\" tizen_sdk_root=\"$TIZEN_SDK_ROOT\" tizen_sdk_sysroot=\"$TIZEN_SDK_SYSROOT\"" \ $PW_PROJECT_ROOT/out/tizen-arm-light
Building tizen-arm-light
ninja -C $PW_PROJECT_ROOT/out/tizen-arm-light
When building Matter example application, this step is optional. In case when author certificate and security profile are not found, they will be created automatically. Automatically generated dummy certificate will have the following options: name=“Matter Example” email=“matter@tizen.org” password=“0123456789”
In order to create and use custom author certificate, one can use the commands described below. Change the certificate password and author data as needed. The security profile alias should not be changed, as the “CHIP” name is used in the Matter example build system.
$TIZEN_SDK_ROOT/tools/ide/bin/tizen certificate \ --alias=CHIP \ --name=CHIP \ --email=chip@tizen.org \ --password=chiptizen $TIZEN_SDK_ROOT/tools/ide/bin/tizen security-profiles add \ --active \ --name=CHIP \ --author=$HOME/tizen-sdk-data/keystore/author/author.p12 \ --password=chiptizen
This is only one-time action. To regenerate the author certificate and security profile, you have to remove files from the $HOME directory using specified commands:
rm -r \ $HOME/tizen-sdk-data \ $HOME/.tizen-cli-config \ $HOME/.secretsdb
After that, normally call scripts to generate the author certificate and security profile mentioned previously.
Please note, that regenerating the author certificate and security profile makes it necessary to remove the previously installed Tizen app. You can't reinstall an application on the Tizen device with a different certificate.
pkgcmd -u -n org.tizen.matter.example.lighting
ninja -C $PW_PROJECT_ROOT/out/tizen-arm-light chip-lighting-app:tpk
Upload TPK package to device under test (DUT). Install it with pkgcmd as follows:
pkgcmd -i -t tpk -p org.tizen.matter.example.lighting-1.0.0.tpk
For launching Tizen application one should use app_launcher. It is possible to pass user arguments from command line which might be used to control application behavior. However, passed strings cannot start with “-” (minus) character and all arguments have to consist of name and value. Boolean options (option without argument) should have value equal to “true”.
e.g.:
app_launcher --start=org.tizen.matter.example.lighting discriminator 43 wifi true
To run all commands below sdb has to be installed on computer and available in PATH. Also vscode has to have the augustocdias.tasks-shell-input extension installed.
Build app:
open the Command Palette (Ctrl+Shift+P) -> Tasks: Run Task -> Build LightingApp (Tizen)
SDB connect to device: required to run Tizen commands below if device is debugged over network
open the Command Palette (Ctrl+Shift+P) -> Tasks: Run Task -> Connect to device (Tizen) -> insert IP address and port
Install app: it is separated from build app step.
open the Command Palette (Ctrl+Shift+P) -> Tasks: Run Task -> Install LightingApp (Tizen)
Launch LightingApp with gdbserver attached: require to install app previously.
open the Command Palette (Ctrl+Shift+P) -> Tasks: Run Task -> Launch LightingApp with gdbserver attached (Tizen)
To debug app using vscode gdbserver has to be available on the target device, run ./scripts/helpers/tizen_gdbserver_run.sh --help for more information.