# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 3.2.2. [TC-BRBINFO-2.2] Events [DUT-Server]

PICS:
    - BRBINFO.S

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Precondition"
      verification: |
          1. DUT and TH can interact with each other. DUT is commissioned.

          2. TH reads SoftwareVersion attribute from DUT and saves for future use

          3. TH reads Reachable attribute from DUT and saves for future use

          4. TH subscribes to StartUp, ShutDown, ReachableChanged and Leave events on the Basic cluster of the DUT

          5. TH saves the FabricIndex during commissioning
      disabled: true

    - label:
          "Reboot the DUT (i.e. restart by power cycle, not by making it factory
          new) TH receives the StartUp event from DUT"
      PICS: BRBINFO.S.E00
      verification: |
          StartUp is an optional Event -
          As its an optional event we cannot generate the event as of now , hence no example logs provided.


          ./chip-tool bridgeddevicebasic read-event start-up 1 3
      disabled: true

    - label:
          "Make the device on the bridged endpoint unreachable across the
          bridge, such that the Reachable attribute changes, in a
          manufacturer-specific way, such as powering off or otherwise disabling
          the bridged device or the connectivity to it."
      PICS: BRBINFO.S.E03
      verification: |
          To verify that  the  ReachableChanged follow the below procedure

          1. ./chip-tool interactive start
          2. bridgeddevicebasic subscribe reachable 1 60 1 4
          3. press "u" on bridge-app to change reachable to false for endpoint 4 and see the reachable value has been changed compared with precondition

          [1659441181.388547][2392:2397] CHIP:TOO: Endpoint: 4 Cluster: 0x0000_0039 Attribute 0x0000_0011 DataVersion: 2189020906
          [1659441181.388600][2392:2397] CHIP:TOO:   Reachable: FALSE
          [1659441181.388651][2392:2397] CHIP:DMG: MoveToState ReadClient[0xffff7c005ac0]: Moving to [AwaitingSu]

          4. press "v"  on bridge-app to change reachable to true for endpoint 4

          [1659441193.443232][2392:2397] CHIP:TOO: Endpoint: 4 Cluster: 0x0000_0039 Attribute 0x0000_0011 DataVersion: 2189020907
          [1659441193.443267][2392:2397] CHIP:TOO:   Reachable: TRUE
          [1659441193.443331][2392:2397] CHIP:EM: Piggybacking Ack for MessageCounter:194624180 on exchange: 18196r
      disabled: true

    - label: "TH subscribes to the shutdown event on the DUT. Shutdown DUT."
      PICS: BRBINFO.S.E01
      verification: |
          ShutDown is an optional Event -
          As its an optional event we cannot generate the event as of now , hence no example logs provided.

          ./chip-tool bridgeddevicebasic read-event shut-down  1 3
      disabled: true