# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 19.1.2. [TC-SC-5.2] Receiving a group message - TH to DUT

PICS:
    - MCORE.ROLE.COMMISSIONEE

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Precondition"
      verification: |
          DUT and TH are commissioned.

          DUT and TH are part of a common group.- Run TC-SC-5.1 to establish this precondition

          DUT supports the Identify cluster
      disabled: true

    - label: "TH writes ACL entry by setting AuthMode as Group to DUT"
      verification: |
          As this step is executed in the TC-SC-5.1, we can skip this step during execution.
      disabled: true

    - label:
          "TH sends a multicast Identify command with the IdentifyTime set to
          0x0078 (120s) to DUT with GroupID and PIXIT.G.ENDPOINT"
      PICS: I.S.C00.Rsp
      verification: |
          ./chip-tool identify identify 0x0078 0xffffffffffff0001 1

          Verify Identify command on the TH(chip-tool) Log and below is the sample log provided for the raspi platform:


          [1657785273.973231][1618:1623] CHIP:DL: HandlePlatformSpecificBLEEvent 32784[1657785273.973291][1618:1623] CHIP:TOO: Sending command to group 0x1
          [1657785273.973316][1618:1623] CHIP:TOO: Sending cluster (0x00000003) command (0x00000000) on Group 1
      disabled: true

    - label:
          "TH reads immediately IdentifyTime attribute from DUT on the
          PIXIT.G.ENDPOINT set by DUT"
      PICS: I.S.A0000
      verification: |
          ./chip-tool identify read identify-time 1 1

          Verify  Identify time is approximately equal to 0x0078 (120s),on the TH(chip-tool)  Log and below is the sample log provided for the raspi platform:

          [1657785288.647504][1624:1629] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0003 Attribute 0x0000_0000 DataVersion: 1130139861
          [1657785288.647621][1624:1629] CHIP:TOO:   identify time: 120
      disabled: true