| /* |
| * |
| * Copyright (c) 2021 Project CHIP Authors |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /***************************************************************************//** |
| * @file gcc_EFR32MG24.ld |
| * @brief GNU Linker Script for Cortex-M based device |
| * @version V2.2.0 |
| * @date 16. December 2020 |
| * Linker script for Silicon Labs EFR32MG24 devices |
| ******************************************************************************* |
| * # License |
| * <b>Copyright 2022 Silicon Laboratories, Inc. www.silabs.com </b> |
| ******************************************************************************* |
| * |
| * SPDX-License-Identifier: Zlib |
| * |
| * The licensor of this software is Silicon Laboratories Inc. |
| * |
| * This software is provided 'as-is', without any express or implied |
| * warranty. In no event will the authors be held liable for any damages |
| * arising from the use of this software. |
| * |
| * Permission is granted to anyone to use this software for any purpose, |
| * including commercial applications, and to alter it and redistribute it |
| * freely, subject to the following restrictions: |
| * |
| * 1. The origin of this software must not be misrepresented; you must not |
| * claim that you wrote the original software. If you use this software |
| * in a product, an acknowledgment in the product documentation would be |
| * appreciated but is not required. |
| * 2. Altered source versions must be plainly marked as such, and must not be |
| * misrepresented as being the original software. |
| * 3. This notice may not be removed or altered from any source distribution. |
| * |
| ******************************************************************************/ |
| |
| MEMORY |
| { |
| FLASH (rx) : ORIGIN = 0x08006000, LENGTH = 0x17A000 |
| RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 |
| } |
| |
| /* Linker script to place sections and symbol values. Should be used together |
| * with other linker script that defines memory regions FLASH and RAM. |
| * It references following symbols, which must be defined in code: |
| * Reset_Handler : Entry of reset handler |
| * |
| * It defines following symbols, which code can use without definition: |
| * __exidx_start |
| * __exidx_end |
| * __copy_table_start__ |
| * __copy_table_end__ |
| * __zero_table_start__ |
| * __zero_table_end__ |
| * __etext |
| * __data_start__ |
| * __preinit_array_start |
| * __preinit_array_end |
| * __init_array_start |
| * __init_array_end |
| * __fini_array_start |
| * __fini_array_end |
| * __data_end__ |
| * __bss_start__ |
| * __bss_end__ |
| * __end__ |
| * end |
| * __HeapLimit |
| * __StackLimit |
| * __StackTop |
| * __stack |
| * __StackSeal (only if ARMv8-M stack sealing is used) |
| */ |
| |
| ENTRY(Reset_Handler) |
| |
| SECTIONS |
| { |
| .text : |
| { |
| KEEP(*(.vectors)) |
| *(.text*) |
| |
| KEEP(*(.init)) |
| KEEP(*(.fini)) |
| |
| /* .ctors */ |
| *crtbegin.o(.ctors) |
| *crtbegin?.o(.ctors) |
| *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) |
| *(SORT(.ctors.*)) |
| *(.ctors) |
| |
| /* .dtors */ |
| *crtbegin.o(.dtors) |
| *crtbegin?.o(.dtors) |
| *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) |
| *(SORT(.dtors.*)) |
| *(.dtors) |
| |
| *(.rodata*) |
| |
| KEEP(*(.eh_frame*)) |
| } > FLASH |
| .ARM.extab : |
| { |
| *(.ARM.extab* .gnu.linkonce.armextab.*) |
| } > FLASH |
| |
| __exidx_start = .; |
| .ARM.exidx : |
| { |
| *(.ARM.exidx* .gnu.linkonce.armexidx.*) |
| } > FLASH |
| __exidx_end = .; |
| |
| .copy.table : |
| { |
| . = ALIGN(4); |
| __copy_table_start__ = .; |
| |
| LONG (__etext) |
| LONG (__data_start__) |
| LONG ((__data_end__ - __data_start__) / 4) |
| |
| __copy_table_end__ = .; |
| } > FLASH |
| |
| .zero.table : |
| { |
| . = ALIGN(4); |
| __zero_table_start__ = .; |
| __zero_table_end__ = .; |
| __etext = ALIGN(4); |
| } > FLASH |
| |
| .data : AT (__etext) |
| { |
| __data_start__ = .; |
| *(vtable) |
| *(.data*) |
| . = ALIGN (4); |
| PROVIDE (__ram_func_section_start = .); |
| *(.ram) |
| PROVIDE (__ram_func_section_end = .); |
| |
| . = ALIGN(4); |
| /* preinit data */ |
| PROVIDE_HIDDEN (__preinit_array_start = .); |
| KEEP(*(.preinit_array)) |
| PROVIDE_HIDDEN (__preinit_array_end = .); |
| |
| . = ALIGN(4); |
| /* init data */ |
| PROVIDE_HIDDEN (__init_array_start = .); |
| KEEP(*(SORT(.init_array.*))) |
| KEEP(*(.init_array)) |
| PROVIDE_HIDDEN (__init_array_end = .); |
| |
| . = ALIGN(4); |
| /* finit data */ |
| PROVIDE_HIDDEN (__fini_array_start = .); |
| KEEP(*(SORT(.fini_array.*))) |
| KEEP(*(.fini_array)) |
| PROVIDE_HIDDEN (__fini_array_end = .); |
| |
| KEEP(*(.jcr*)) |
| . = ALIGN(4); |
| /* All data end */ |
| __data_end__ = .; |
| |
| } > RAM |
| |
| .bss : |
| { |
| . = ALIGN(4); |
| __bss_start__ = .; |
| *(.bss) |
| *(.bss.*) |
| *(COMMON) |
| . = ALIGN(4); |
| __bss_end__ = .; |
| } > RAM AT > RAM |
| |
| .heap (COPY): |
| { |
| __HeapBase = .; |
| __end__ = .; |
| end = __end__; |
| _end = __end__; |
| KEEP(*(.heap*)) |
| __HeapLimit = .; |
| } > RAM |
| |
| __main_flash_end__ = ORIGIN(FLASH) + LENGTH(FLASH); |
| |
| /* .stack_dummy section doesn't contains any symbols. It is only |
| * used for linker to calculate size of stack sections, and assign |
| * values to stack symbols later */ |
| .stack_dummy (COPY): |
| { |
| KEEP(*(.stack*)) |
| /* KEEP(*(.stackseal*))*/ |
| } > RAM |
| |
| /* Set stack top to end of RAM, and stack limit move down by |
| * size of stack_dummy section */ |
| __StackTop = ORIGIN(RAM) + LENGTH(RAM); |
| __StackLimit = __StackTop - SIZEOF(.stack_dummy); |
| PROVIDE(__stack = __StackTop); |
| |
| .nvm (DSECT) : { |
| KEEP(*(.simee*)) |
| } > FLASH |
| |
| /* Last page of flash is reserved for the manufacturing token space */ |
| linker_nvm_end = __main_flash_end__ - 8192; |
| linker_nvm_begin = linker_nvm_end - SIZEOF(.nvm); |
| linker_nvm_size = SIZEOF(.nvm); |
| __nvm3Base = linker_nvm_begin; |
| __attestation_credentials_base = linker_nvm_end; |
| |
| /* Check if data + heap + stack exceeds RAM limit */ |
| /*ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")*/ |
| ASSERT( (linker_nvm_begin + SIZEOF(.nvm)) <= __main_flash_end__, "NVM3 is excessing the flash size !") |
| |
| /* Check if FLASH usage exceeds FLASH size */ |
| ASSERT( LENGTH(FLASH) >= (__etext + SIZEOF(.data)), "FLASH memory overflowed !") |
| } |