| /* |
| * |
| * Copyright (c) 2020-2021 Project CHIP Authors |
| * Copyright (c) 2018 Nest Labs, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * Provides an implementation of the BLEManager singleton object |
| * for Linux platforms. |
| */ |
| |
| /** |
| * Note: BLEManager requires ConnectivityManager to be defined beforehand, |
| * otherwise we will face circular dependency between them. */ |
| #include <platform/ConnectivityManager.h> |
| |
| /** |
| * Note: Use public include for BLEManager which includes our local |
| * platform/<PLATFORM>/BLEManagerImpl.h after defining interface class. */ |
| #include "platform/internal/BLEManager.h" |
| |
| #include <type_traits> |
| #include <utility> |
| |
| #include <ble/CHIPBleServiceData.h> |
| #include <lib/support/CodeUtils.h> |
| #include <lib/support/SafeInt.h> |
| #include <platform/CHIPDeviceLayer.h> |
| #include <platform/CommissionableDataProvider.h> |
| |
| #include "bluez/BluezEndpoint.h" |
| |
| #if !CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION |
| #include <platform/DeviceControlServer.h> |
| #endif |
| |
| using namespace ::nl; |
| using namespace ::chip::Ble; |
| |
| namespace chip { |
| namespace DeviceLayer { |
| namespace Internal { |
| |
| namespace { |
| |
| static constexpr System::Clock::Timeout kNewConnectionScanTimeout = System::Clock::Seconds16(20); |
| static constexpr System::Clock::Timeout kConnectTimeout = System::Clock::Seconds16(20); |
| static constexpr System::Clock::Timeout kFastAdvertiseTimeout = |
| System::Clock::Milliseconds32(CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME); |
| #if CHIP_DEVICE_CONFIG_EXT_ADVERTISING |
| // The CHIP_DEVICE_CONFIG_BLE_EXT_ADVERTISING_INTERVAL_CHANGE_TIME_MS specifies the transition time |
| // starting from advertisement commencement. Since the extended advertisement timer is started after |
| // the fast-to-slow transition, we have to subtract the time spent in fast advertising. |
| static constexpr System::Clock::Timeout kSlowAdvertiseTimeout = System::Clock::Milliseconds32( |
| CHIP_DEVICE_CONFIG_BLE_EXT_ADVERTISING_INTERVAL_CHANGE_TIME_MS - CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME); |
| static_assert(CHIP_DEVICE_CONFIG_BLE_EXT_ADVERTISING_INTERVAL_CHANGE_TIME_MS >= |
| CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME, |
| "The extended advertising interval change time must be greater than the fast advertising interval change time"); |
| #endif |
| |
| void HandleConnectTimeout(chip::System::Layer *, void * apEndpoint) |
| { |
| VerifyOrDie(apEndpoint != nullptr); |
| static_cast<BluezEndpoint *>(apEndpoint)->CancelConnect(); |
| BLEManagerImpl::HandleConnectFailed(CHIP_ERROR_TIMEOUT); |
| } |
| |
| } // namespace |
| |
| BLEManagerImpl BLEManagerImpl::sInstance; |
| |
| void HandleIncomingBleConnection(BLEEndPoint * bleEP) |
| { |
| ChipLogProgress(DeviceLayer, "CHIPoBluez con rcvd"); |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_Init() |
| { |
| CHIP_ERROR err; |
| |
| err = BleLayer::Init(this, this, this, &DeviceLayer::SystemLayer()); |
| SuccessOrExit(err); |
| |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Enabled; |
| mFlags.ClearAll().Set(Flags::kAdvertisingEnabled, CHIP_DEVICE_CONFIG_CHIPOBLE_ENABLE_ADVERTISING_AUTOSTART && !mIsCentral); |
| mFlags.Set(Flags::kFastAdvertisingEnabled, true); |
| |
| memset(mDeviceName, 0, sizeof(mDeviceName)); |
| |
| OnChipBleConnectReceived = HandleIncomingBleConnection; |
| |
| DeviceLayer::SystemLayer().ScheduleLambda([this] { DriveBLEState(); }); |
| |
| exit: |
| return err; |
| } |
| |
| void BLEManagerImpl::_Shutdown() |
| { |
| // Ensure scan resources are cleared (e.g. timeout timers). |
| mDeviceScanner.Shutdown(); |
| // Stop advertising and free resources. |
| mBLEAdvertisement.Shutdown(); |
| // Make sure that the endpoint is not used by the timer. |
| DeviceLayer::SystemLayer().CancelTimer(HandleConnectTimeout, &mEndpoint); |
| // Release BLE connection resources (unregister from BlueZ). |
| mEndpoint.Shutdown(); |
| mFlags.Clear(Flags::kBluezBLELayerInitialized); |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetAdvertisingEnabled(bool val) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| if (mFlags.Has(Flags::kAdvertisingEnabled) != val) |
| { |
| mFlags.Set(Flags::kAdvertisingEnabled, val); |
| } |
| |
| DeviceLayer::SystemLayer().ScheduleLambda([this] { DriveBLEState(); }); |
| |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetAdvertisingMode(BLEAdvertisingMode mode) |
| { |
| switch (mode) |
| { |
| case BLEAdvertisingMode::kFastAdvertising: |
| mFlags.Set(Flags::kFastAdvertisingEnabled, true); |
| break; |
| case BLEAdvertisingMode::kSlowAdvertising: |
| mFlags.Set(Flags::kFastAdvertisingEnabled, false); |
| break; |
| default: |
| return CHIP_ERROR_INVALID_ARGUMENT; |
| } |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| DeviceLayer::SystemLayer().ScheduleLambda([this] { DriveBLEState(); }); |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_GetDeviceName(char * buf, size_t bufSize) |
| { |
| if (strlen(mDeviceName) >= bufSize) |
| { |
| return CHIP_ERROR_BUFFER_TOO_SMALL; |
| } |
| strcpy(buf, mDeviceName); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetDeviceName(const char * deviceName) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| if (deviceName != nullptr && deviceName[0] != 0) |
| { |
| VerifyOrExit(strlen(deviceName) < kMaxDeviceNameLength, err = CHIP_ERROR_INVALID_ARGUMENT); |
| strcpy(mDeviceName, deviceName); |
| mFlags.Set(Flags::kUseCustomDeviceName); |
| } |
| else |
| { |
| uint16_t discriminator; |
| SuccessOrExit(err = GetCommissionableDataProvider()->GetSetupDiscriminator(discriminator)); |
| snprintf(mDeviceName, sizeof(mDeviceName), "%s%04u", CHIP_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX, discriminator); |
| mDeviceName[kMaxDeviceNameLength] = 0; |
| mFlags.Clear(Flags::kUseCustomDeviceName); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| uint16_t BLEManagerImpl::_NumConnections() |
| { |
| uint16_t numCons = 0; |
| return numCons; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::ConfigureBle(uint32_t aAdapterId, bool aIsCentral) |
| { |
| mAdapterId = aAdapterId; |
| mIsCentral = aIsCentral; |
| mpBLEAdvUUID = "0xFFF6"; |
| return CHIP_NO_ERROR; |
| } |
| |
| void BLEManagerImpl::_OnPlatformEvent(const ChipDeviceEvent * event) |
| { |
| switch (event->Type) |
| { |
| case DeviceEventType::kCHIPoBLESubscribe: |
| HandleSubscribeReceived(event->CHIPoBLESubscribe.ConId, &CHIP_BLE_SVC_ID, &Ble::CHIP_BLE_CHAR_2_UUID); |
| { |
| ChipDeviceEvent connectionEvent; |
| connectionEvent.Type = DeviceEventType::kCHIPoBLEConnectionEstablished; |
| PlatformMgr().PostEventOrDie(&connectionEvent); |
| } |
| break; |
| |
| case DeviceEventType::kCHIPoBLEUnsubscribe: |
| HandleUnsubscribeReceived(event->CHIPoBLEUnsubscribe.ConId, &CHIP_BLE_SVC_ID, &Ble::CHIP_BLE_CHAR_2_UUID); |
| break; |
| |
| case DeviceEventType::kCHIPoBLEWriteReceived: |
| HandleWriteReceived(event->CHIPoBLEWriteReceived.ConId, &CHIP_BLE_SVC_ID, &Ble::CHIP_BLE_CHAR_1_UUID, |
| PacketBufferHandle::Adopt(event->CHIPoBLEWriteReceived.Data)); |
| break; |
| |
| case DeviceEventType::kCHIPoBLEIndicateConfirm: |
| HandleIndicationConfirmation(event->CHIPoBLEIndicateConfirm.ConId, &CHIP_BLE_SVC_ID, &Ble::CHIP_BLE_CHAR_2_UUID); |
| break; |
| |
| case DeviceEventType::kCHIPoBLEConnectionError: |
| HandleConnectionError(event->CHIPoBLEConnectionError.ConId, event->CHIPoBLEConnectionError.Reason); |
| break; |
| case DeviceEventType::kServiceProvisioningChange: |
| // Force the advertising configuration to be refreshed to reflect new provisioning state. |
| mFlags.Clear(Flags::kAdvertisingConfigured); |
| |
| DriveBLEState(); |
| break; |
| default: |
| HandlePlatformSpecificBLEEvent(event); |
| break; |
| } |
| } |
| |
| void BLEManagerImpl::HandlePlatformSpecificBLEEvent(const ChipDeviceEvent * apEvent) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| bool controlOpComplete = false; |
| ChipLogDetail(DeviceLayer, "HandlePlatformSpecificBLEEvent %d", apEvent->Type); |
| switch (apEvent->Type) |
| { |
| case DeviceEventType::kPlatformLinuxBLECentralConnected: |
| if (mBLEScanConfig.mBleScanState == BleScanState::kConnecting) |
| { |
| BleConnectionDelegate::OnConnectionComplete(mBLEScanConfig.mAppState, |
| apEvent->Platform.BLECentralConnected.mConnection); |
| CleanScanConfig(); |
| } |
| break; |
| case DeviceEventType::kPlatformLinuxBLECentralConnectFailed: |
| if (mBLEScanConfig.mBleScanState == BleScanState::kConnecting) |
| { |
| BleConnectionDelegate::OnConnectionError(mBLEScanConfig.mAppState, apEvent->Platform.BLECentralConnectFailed.mError); |
| CleanScanConfig(); |
| } |
| break; |
| case DeviceEventType::kPlatformLinuxBLEWriteComplete: |
| HandleWriteConfirmation(apEvent->Platform.BLEWriteComplete.mConnection, &CHIP_BLE_SVC_ID, &Ble::CHIP_BLE_CHAR_1_UUID); |
| break; |
| case DeviceEventType::kPlatformLinuxBLESubscribeOpComplete: |
| if (apEvent->Platform.BLESubscribeOpComplete.mIsSubscribed) |
| HandleSubscribeComplete(apEvent->Platform.BLESubscribeOpComplete.mConnection, &CHIP_BLE_SVC_ID, |
| &Ble::CHIP_BLE_CHAR_2_UUID); |
| else |
| HandleUnsubscribeComplete(apEvent->Platform.BLESubscribeOpComplete.mConnection, &CHIP_BLE_SVC_ID, |
| &Ble::CHIP_BLE_CHAR_2_UUID); |
| break; |
| case DeviceEventType::kPlatformLinuxBLEIndicationReceived: |
| HandleIndicationReceived(apEvent->Platform.BLEIndicationReceived.mConnection, &CHIP_BLE_SVC_ID, &Ble::CHIP_BLE_CHAR_2_UUID, |
| PacketBufferHandle::Adopt(apEvent->Platform.BLEIndicationReceived.mData)); |
| break; |
| case DeviceEventType::kPlatformLinuxBLEPeripheralAdvStartComplete: |
| SuccessOrExit(err = apEvent->Platform.BLEPeripheralAdvStartComplete.mError); |
| sInstance.mFlags.Clear(Flags::kControlOpInProgress).Clear(Flags::kAdvertisingRefreshNeeded); |
| // Do not restart the timer if it is still active. This is to avoid the timer from being restarted |
| // if the advertising is stopped due to a premature release. |
| if (!DeviceLayer::SystemLayer().IsTimerActive(HandleAdvertisingTimer, this)) |
| { |
| // Start a timer to make sure that the fast advertising is stopped after specified timeout. |
| SuccessOrExit(err = DeviceLayer::SystemLayer().StartTimer(kFastAdvertiseTimeout, HandleAdvertisingTimer, this)); |
| } |
| sInstance.mFlags.Set(Flags::kAdvertising); |
| break; |
| case DeviceEventType::kPlatformLinuxBLEPeripheralAdvStopComplete: |
| SuccessOrExit(err = apEvent->Platform.BLEPeripheralAdvStopComplete.mError); |
| sInstance.mFlags.Clear(Flags::kControlOpInProgress).Clear(Flags::kAdvertisingRefreshNeeded); |
| DeviceLayer::SystemLayer().CancelTimer(HandleAdvertisingTimer, this); |
| |
| // Transition to the not Advertising state... |
| if (sInstance.mFlags.Has(Flags::kAdvertising)) |
| { |
| sInstance.mFlags.Clear(Flags::kAdvertising); |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising stopped"); |
| } |
| break; |
| case DeviceEventType::kPlatformLinuxBLEPeripheralAdvReleased: |
| // If the advertising was stopped due to a premature release, check if it needs to be restarted. |
| sInstance.mFlags.Clear(Flags::kAdvertising); |
| DriveBLEState(); |
| break; |
| case DeviceEventType::kPlatformLinuxBLEPeripheralRegisterAppComplete: |
| SuccessOrExit(err = apEvent->Platform.BLEPeripheralRegisterAppComplete.mError); |
| mFlags.Set(Flags::kAppRegistered); |
| controlOpComplete = true; |
| break; |
| default: |
| break; |
| } |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Disabling CHIPoBLE service due to error: %s", ErrorStr(err)); |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Disabled; |
| DeviceLayer::SystemLayer().CancelTimer(HandleAdvertisingTimer, this); |
| sInstance.mFlags.Clear(Flags::kControlOpInProgress); |
| } |
| |
| if (controlOpComplete) |
| { |
| mFlags.Clear(Flags::kControlOpInProgress); |
| DriveBLEState(); |
| } |
| } |
| |
| uint16_t BLEManagerImpl::GetMTU(BLE_CONNECTION_OBJECT conId) const |
| { |
| uint16_t mtu = 0; |
| VerifyOrExit(conId != BLE_CONNECTION_UNINITIALIZED, |
| ChipLogError(DeviceLayer, "BLE connection is not initialized in %s", __func__)); |
| mtu = conId->GetMTU(); |
| exit: |
| return mtu; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::SubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, |
| const ChipBleUUID * charId) |
| { |
| CHIP_ERROR err = BLE_ERROR_GATT_SUBSCRIBE_FAILED; |
| |
| VerifyOrExit(conId != BLE_CONNECTION_UNINITIALIZED, |
| ChipLogError(DeviceLayer, "BLE connection is not initialized in %s", __func__)); |
| VerifyOrExit(Ble::UUIDsMatch(svcId, &CHIP_BLE_SVC_ID), |
| ChipLogError(DeviceLayer, "SubscribeCharacteristic() called with invalid service ID")); |
| VerifyOrExit(Ble::UUIDsMatch(charId, &Ble::CHIP_BLE_CHAR_2_UUID), |
| ChipLogError(DeviceLayer, "SubscribeCharacteristic() called with invalid characteristic ID")); |
| err = conId->SubscribeCharacteristic(); |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::UnsubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, |
| const ChipBleUUID * charId) |
| { |
| CHIP_ERROR err = BLE_ERROR_GATT_UNSUBSCRIBE_FAILED; |
| |
| VerifyOrExit(conId != BLE_CONNECTION_UNINITIALIZED, |
| ChipLogError(DeviceLayer, "BLE connection is not initialized in %s", __func__)); |
| VerifyOrExit(Ble::UUIDsMatch(svcId, &CHIP_BLE_SVC_ID), |
| ChipLogError(DeviceLayer, "UnsubscribeCharacteristic() called with invalid service ID")); |
| VerifyOrExit(Ble::UUIDsMatch(charId, &Ble::CHIP_BLE_CHAR_2_UUID), |
| ChipLogError(DeviceLayer, "UnsubscribeCharacteristic() called with invalid characteristic ID")); |
| err = conId->UnsubscribeCharacteristic(); |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::CloseConnection(BLE_CONNECTION_OBJECT conId) |
| { |
| CHIP_ERROR err = CHIP_ERROR_INTERNAL; |
| |
| VerifyOrExit(conId != BLE_CONNECTION_UNINITIALIZED, |
| ChipLogError(DeviceLayer, "BLE connection is not initialized in %s", __func__)); |
| ChipLogProgress(DeviceLayer, "Closing BLE GATT connection (con %p)", conId); |
| err = conId->CloseConnection(); |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::SendIndication(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const Ble::ChipBleUUID * charId, |
| chip::System::PacketBufferHandle pBuf) |
| { |
| CHIP_ERROR err = BLE_ERROR_GATT_INDICATE_FAILED; |
| |
| VerifyOrExit(conId != BLE_CONNECTION_UNINITIALIZED, |
| ChipLogError(DeviceLayer, "BLE connection is not initialized in %s", __func__)); |
| err = conId->SendIndication(std::move(pBuf)); |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::SendWriteRequest(BLE_CONNECTION_OBJECT conId, const Ble::ChipBleUUID * svcId, |
| const Ble::ChipBleUUID * charId, chip::System::PacketBufferHandle pBuf) |
| { |
| CHIP_ERROR err = BLE_ERROR_GATT_WRITE_FAILED; |
| |
| VerifyOrExit(conId != BLE_CONNECTION_UNINITIALIZED, |
| ChipLogError(DeviceLayer, "BLE connection is not initialized in %s", __func__)); |
| VerifyOrExit(Ble::UUIDsMatch(svcId, &CHIP_BLE_SVC_ID), |
| ChipLogError(DeviceLayer, "SendWriteRequest() called with invalid service ID")); |
| VerifyOrExit(Ble::UUIDsMatch(charId, &Ble::CHIP_BLE_CHAR_1_UUID), |
| ChipLogError(DeviceLayer, "SendWriteRequest() called with invalid characteristic ID")); |
| err = conId->SendWriteRequest(std::move(pBuf)); |
| |
| exit: |
| return err; |
| } |
| |
| void BLEManagerImpl::HandleNewConnection(BLE_CONNECTION_OBJECT conId) |
| { |
| if (sInstance.mIsCentral) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kPlatformLinuxBLECentralConnected; |
| event.Platform.BLECentralConnected.mConnection = conId; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| } |
| |
| void BLEManagerImpl::HandleConnectFailed(CHIP_ERROR error) |
| { |
| if (sInstance.mIsCentral) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kPlatformLinuxBLECentralConnectFailed; |
| event.Platform.BLECentralConnectFailed.mError = error; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| } |
| |
| void BLEManagerImpl::HandleWriteComplete(BLE_CONNECTION_OBJECT conId) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kPlatformLinuxBLEWriteComplete; |
| event.Platform.BLEWriteComplete.mConnection = conId; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| void BLEManagerImpl::HandleSubscribeOpComplete(BLE_CONNECTION_OBJECT conId, bool subscribed) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kPlatformLinuxBLESubscribeOpComplete; |
| event.Platform.BLESubscribeOpComplete.mConnection = conId; |
| event.Platform.BLESubscribeOpComplete.mIsSubscribed = subscribed; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| void BLEManagerImpl::HandleTXCharChanged(BLE_CONNECTION_OBJECT conId, const uint8_t * value, size_t len) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| System::PacketBufferHandle buf = System::PacketBufferHandle::NewWithData(value, len); |
| |
| ChipLogDetail(DeviceLayer, "Indication received, conn = %p", conId); |
| |
| VerifyOrExit(!buf.IsNull(), err = CHIP_ERROR_NO_MEMORY); |
| |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kPlatformLinuxBLEIndicationReceived; |
| event.Platform.BLEIndicationReceived.mConnection = conId; |
| event.Platform.BLEIndicationReceived.mData = std::move(buf).UnsafeRelease(); |
| PlatformMgr().PostEventOrDie(&event); |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| ChipLogError(DeviceLayer, "HandleTXCharChanged() failed: %s", ErrorStr(err)); |
| } |
| |
| void BLEManagerImpl::HandleRXCharWrite(BLE_CONNECTION_OBJECT conId, const uint8_t * value, size_t len) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| System::PacketBufferHandle buf; |
| |
| // Copy the data to a packet buffer. |
| buf = System::PacketBufferHandle::NewWithData(value, len); |
| VerifyOrExit(!buf.IsNull(), err = CHIP_ERROR_NO_MEMORY); |
| |
| // Post an event to the Chip queue to deliver the data into the Chip stack. |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kCHIPoBLEWriteReceived; |
| ChipLogProgress(Ble, "Write request received debug %p", conId); |
| event.CHIPoBLEWriteReceived.ConId = conId; |
| event.CHIPoBLEWriteReceived.Data = std::move(buf).UnsafeRelease(); |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "HandleRXCharWrite() failed: %s", ErrorStr(err)); |
| } |
| } |
| |
| void BLEManagerImpl::CHIPoBluez_ConnectionClosed(BLE_CONNECTION_OBJECT conId) |
| { |
| ChipLogProgress(DeviceLayer, "Bluez notify CHIPoBluez connection disconnected"); |
| |
| // If this was a CHIPoBLE connection, post an event to deliver a connection error to the CHIPoBLE layer. |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kCHIPoBLEConnectionError; |
| event.CHIPoBLEConnectionError.ConId = conId; |
| event.CHIPoBLEConnectionError.Reason = BLE_ERROR_REMOTE_DEVICE_DISCONNECTED; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| } |
| |
| void BLEManagerImpl::HandleTXCharCCCDWrite(BLE_CONNECTION_OBJECT conId) |
| { |
| VerifyOrReturn(conId != BLE_CONNECTION_UNINITIALIZED, |
| ChipLogError(DeviceLayer, "BLE connection is not initialized in %s", __func__)); |
| |
| // Post an event to the Chip queue to process either a CHIPoBLE Subscribe or Unsubscribe based on |
| // whether the client is enabling or disabling indications. |
| ChipDeviceEvent event; |
| event.Type = conId->IsNotifyAcquired() ? DeviceEventType::kCHIPoBLESubscribe : DeviceEventType::kCHIPoBLEUnsubscribe; |
| event.CHIPoBLESubscribe.ConId = conId; |
| PlatformMgr().PostEventOrDie(&event); |
| |
| ChipLogProgress(DeviceLayer, "CHIPoBLE %s received", |
| (event.Type == DeviceEventType::kCHIPoBLESubscribe) ? "subscribe" : "unsubscribe"); |
| } |
| |
| void BLEManagerImpl::HandleTXComplete(BLE_CONNECTION_OBJECT conId) |
| { |
| // Post an event to the Chip queue to process the indicate confirmation. |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kCHIPoBLEIndicateConfirm; |
| event.CHIPoBLEIndicateConfirm.ConId = conId; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| void BLEManagerImpl::DriveBLEState() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| // Perform any initialization actions that must occur after the Chip task is running. |
| if (!mFlags.Has(Flags::kAsyncInitCompleted)) |
| { |
| mFlags.Set(Flags::kAsyncInitCompleted); |
| ExitNow(); |
| } |
| |
| // If there's already a control operation in progress, wait until it completes. |
| VerifyOrExit(!mFlags.Has(Flags::kControlOpInProgress), /* */); |
| |
| // Initializes the Bluez BLE layer if needed. |
| if (mServiceMode == ConnectivityManager::kCHIPoBLEServiceMode_Enabled && !mFlags.Has(Flags::kBluezBLELayerInitialized)) |
| { |
| SuccessOrExit(err = mEndpoint.Init(mIsCentral, mAdapterId)); |
| mFlags.Set(Flags::kBluezBLELayerInitialized); |
| } |
| |
| // Register the CHIPoBLE application with the Bluez BLE layer if needed. |
| if (!mIsCentral && mServiceMode == ConnectivityManager::kCHIPoBLEServiceMode_Enabled && !mFlags.Has(Flags::kAppRegistered)) |
| { |
| SuccessOrExit(err = mEndpoint.RegisterGattApplication()); |
| mFlags.Set(Flags::kControlOpInProgress); |
| ExitNow(); |
| } |
| |
| // If the application has enabled CHIPoBLE and BLE advertising... |
| if (mServiceMode == ConnectivityManager::kCHIPoBLEServiceMode_Enabled && mFlags.Has(Flags::kAdvertisingEnabled)) |
| { |
| // Start/re-start advertising if not already advertising, or if the advertising state of the |
| // Bluez BLE layer needs to be refreshed. |
| if (!mFlags.Has(Flags::kAdvertising) || mFlags.Has(Flags::kAdvertisingRefreshNeeded)) |
| { |
| mFlags.Clear(Flags::kAdvertisingRefreshNeeded); |
| |
| // Configure advertising data if it hasn't been done yet. |
| if (!mFlags.Has(Flags::kAdvertisingConfigured)) |
| { |
| SuccessOrExit(err = mBLEAdvertisement.Init(mEndpoint, mpBLEAdvUUID, mDeviceName)); |
| mFlags.Set(Flags::kAdvertisingConfigured); |
| } |
| |
| // Setup service data for advertising. |
| auto serviceDataFlags = BluezAdvertisement::kServiceDataNone; |
| #if CHIP_DEVICE_CONFIG_EXT_ADVERTISING |
| if (mFlags.Has(Flags::kExtAdvertisingEnabled)) |
| serviceDataFlags |= BluezAdvertisement::kServiceDataExtendedAnnouncement; |
| #endif |
| SuccessOrExit(err = mBLEAdvertisement.SetupServiceData(serviceDataFlags)); |
| |
| // Set or update the advertising intervals. |
| SuccessOrExit(err = mBLEAdvertisement.SetIntervals(GetAdvertisingIntervals())); |
| |
| if (!mFlags.Has(Flags::kAdvertising)) |
| { |
| // Start advertising. This is an asynchronous step. BLE manager will be notified of |
| // advertising start completion via a call to NotifyBLEPeripheralAdvStartComplete. |
| SuccessOrExit(err = mBLEAdvertisement.Start()); |
| mFlags.Set(Flags::kControlOpInProgress); |
| ExitNow(); |
| } |
| } |
| } |
| |
| // Otherwise stop advertising if needed... |
| else |
| { |
| if (mFlags.Has(Flags::kAdvertising)) |
| { |
| SuccessOrExit(err = mBLEAdvertisement.Stop()); |
| mFlags.Set(Flags::kControlOpInProgress); |
| |
| ExitNow(); |
| } |
| } |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Disabling CHIPoBLE service due to error: %s", ErrorStr(err)); |
| DeviceLayer::SystemLayer().CancelTimer(HandleAdvertisingTimer, this); |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Disabled; |
| } |
| } |
| |
| void BLEManagerImpl::NotifyChipConnectionClosed(BLE_CONNECTION_OBJECT conId) |
| { |
| ChipLogProgress(Ble, "Got notification regarding chip connection closure"); |
| #if CHIP_DEVICE_CONFIG_ENABLE_WPA && !CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION |
| if (mState == kState_NotInitialized) |
| { |
| // Close BLE GATT connections to disconnect BlueZ |
| CloseConnection(conId); |
| // In Non-Concurrent mode start the Wi-Fi, as BLE has been stopped |
| DeviceLayer::ConnectivityMgrImpl().StartNonConcurrentWiFiManagement(); |
| } |
| #endif // CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION |
| } |
| |
| void BLEManagerImpl::CheckNonConcurrentBleClosing() |
| { |
| #if CHIP_DEVICE_CONFIG_ENABLE_WPA && !CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION |
| if (mState == kState_Disconnecting) |
| { |
| DeviceLayer::DeviceControlServer::DeviceControlSvr().PostCloseAllBLEConnectionsToOperationalNetworkEvent(); |
| } |
| #endif |
| } |
| |
| BluezAdvertisement::AdvertisingIntervals BLEManagerImpl::GetAdvertisingIntervals() const |
| { |
| if (mFlags.Has(Flags::kFastAdvertisingEnabled)) |
| return { CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MIN, CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MAX }; |
| #if CHIP_DEVICE_CONFIG_EXT_ADVERTISING |
| if (mFlags.Has(Flags::kExtAdvertisingEnabled)) |
| return { CHIP_DEVICE_CONFIG_BLE_EXT_ADVERTISING_INTERVAL_MIN, CHIP_DEVICE_CONFIG_BLE_EXT_ADVERTISING_INTERVAL_MAX }; |
| #endif |
| return { CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MIN, CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MAX }; |
| } |
| |
| void BLEManagerImpl::HandleAdvertisingTimer(chip::System::Layer *, void * appState) |
| { |
| auto * self = static_cast<BLEManagerImpl *>(appState); |
| |
| if (self->mFlags.Has(Flags::kFastAdvertisingEnabled)) |
| { |
| ChipLogDetail(DeviceLayer, "bleAdv Timeout : Start slow advertisement"); |
| self->_SetAdvertisingMode(BLEAdvertisingMode::kSlowAdvertising); |
| #if CHIP_DEVICE_CONFIG_EXT_ADVERTISING |
| self->mFlags.Clear(Flags::kExtAdvertisingEnabled); |
| DeviceLayer::SystemLayer().StartTimer(kSlowAdvertiseTimeout, HandleAdvertisingTimer, self); |
| } |
| else |
| { |
| ChipLogDetail(DeviceLayer, "bleAdv Timeout : Start extended advertisement"); |
| self->mFlags.Set(Flags::kExtAdvertisingEnabled); |
| // This will trigger advertising intervals update in the DriveBLEState() function. |
| self->_SetAdvertisingMode(BLEAdvertisingMode::kSlowAdvertising); |
| #endif |
| } |
| } |
| |
| void BLEManagerImpl::InitiateScan(BleScanState scanType) |
| { |
| DriveBLEState(); |
| |
| if (scanType == BleScanState::kNotScanning) |
| { |
| BleConnectionDelegate::OnConnectionError(mBLEScanConfig.mAppState, CHIP_ERROR_INCORRECT_STATE); |
| ChipLogError(Ble, "Invalid scan type requested"); |
| return; |
| } |
| |
| if (!mFlags.Has(Flags::kBluezBLELayerInitialized)) |
| { |
| BleConnectionDelegate::OnConnectionError(mBLEScanConfig.mAppState, CHIP_ERROR_INCORRECT_STATE); |
| ChipLogError(Ble, "BLE Layer is not yet initialized"); |
| return; |
| } |
| |
| if (mEndpoint.GetAdapter() == nullptr) |
| { |
| BleConnectionDelegate::OnConnectionError(mBLEScanConfig.mAppState, CHIP_ERROR_INCORRECT_STATE); |
| ChipLogError(Ble, "No adapter available for new connection establishment"); |
| return; |
| } |
| |
| mBLEScanConfig.mBleScanState = scanType; |
| |
| CHIP_ERROR err = mDeviceScanner.Init(mEndpoint.GetAdapter(), this); |
| if (err != CHIP_NO_ERROR) |
| { |
| mBLEScanConfig.mBleScanState = BleScanState::kNotScanning; |
| BleConnectionDelegate::OnConnectionError(mBLEScanConfig.mAppState, CHIP_ERROR_INTERNAL); |
| ChipLogError(Ble, "Failed to create a BLE device scanner"); |
| return; |
| } |
| |
| err = mDeviceScanner.StartScan(kNewConnectionScanTimeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| mBLEScanConfig.mBleScanState = BleScanState::kNotScanning; |
| ChipLogError(Ble, "Failed to start a BLE can: %s", chip::ErrorStr(err)); |
| BleConnectionDelegate::OnConnectionError(mBLEScanConfig.mAppState, err); |
| return; |
| } |
| } |
| |
| void BLEManagerImpl::CleanScanConfig() |
| { |
| if (mBLEScanConfig.mBleScanState == BleScanState::kConnecting) |
| DeviceLayer::SystemLayer().CancelTimer(HandleConnectTimeout, &mEndpoint); |
| |
| mBLEScanConfig.mBleScanState = BleScanState::kNotScanning; |
| } |
| |
| void BLEManagerImpl::NewConnection(BleLayer * bleLayer, void * appState, const SetupDiscriminator & connDiscriminator) |
| { |
| mBLEScanConfig.mDiscriminator = connDiscriminator; |
| mBLEScanConfig.mAppState = appState; |
| |
| // Scan initiation performed async, to ensure that the BLE subsystem is initialized. |
| DeviceLayer::SystemLayer().ScheduleLambda([this] { InitiateScan(BleScanState::kScanForDiscriminator); }); |
| } |
| |
| CHIP_ERROR BLEManagerImpl::CancelConnection() |
| { |
| if (mBLEScanConfig.mBleScanState == BleScanState::kConnecting) |
| mEndpoint.CancelConnect(); |
| // If in discovery mode, stop scan. |
| else if (mBLEScanConfig.mBleScanState != BleScanState::kNotScanning) |
| mDeviceScanner.StopScan(); |
| return CHIP_NO_ERROR; |
| } |
| |
| void BLEManagerImpl::NotifyBLEPeripheralRegisterAppComplete(CHIP_ERROR error) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kPlatformLinuxBLEPeripheralRegisterAppComplete; |
| event.Platform.BLEPeripheralRegisterAppComplete.mError = error; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| void BLEManagerImpl::NotifyBLEPeripheralAdvStartComplete(CHIP_ERROR error) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kPlatformLinuxBLEPeripheralAdvStartComplete; |
| event.Platform.BLEPeripheralAdvStartComplete.mError = error; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| void BLEManagerImpl::NotifyBLEPeripheralAdvStopComplete(CHIP_ERROR error) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kPlatformLinuxBLEPeripheralAdvStopComplete; |
| event.Platform.BLEPeripheralAdvStopComplete.mError = error; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| void BLEManagerImpl::NotifyBLEPeripheralAdvReleased() |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kPlatformLinuxBLEPeripheralAdvReleased; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| void BLEManagerImpl::OnDeviceScanned(BluezDevice1 & device, const chip::Ble::ChipBLEDeviceIdentificationInfo & info) |
| { |
| const char * address = bluez_device1_get_address(&device); |
| ChipLogProgress(Ble, "New device scanned: %s", address); |
| |
| if (mBLEScanConfig.mBleScanState == BleScanState::kScanForDiscriminator) |
| { |
| auto isMatch = mBLEScanConfig.mDiscriminator.MatchesLongDiscriminator(info.GetDeviceDiscriminator()); |
| VerifyOrReturn( |
| isMatch, |
| ChipLogError(Ble, "Skip connection: Device discriminator does not match: %u != %u", info.GetDeviceDiscriminator(), |
| mBLEScanConfig.mDiscriminator.IsShortDiscriminator() ? mBLEScanConfig.mDiscriminator.GetShortValue() |
| : mBLEScanConfig.mDiscriminator.GetLongValue())); |
| ChipLogProgress(Ble, "Device discriminator match. Attempting to connect."); |
| } |
| else if (mBLEScanConfig.mBleScanState == BleScanState::kScanForAddress) |
| { |
| auto isMatch = strcmp(address, mBLEScanConfig.mAddress.c_str()) == 0; |
| VerifyOrReturn(isMatch, |
| ChipLogError(Ble, "Skip connection: Device address does not match: %s != %s", address, |
| mBLEScanConfig.mAddress.c_str())); |
| ChipLogProgress(Ble, "Device address match. Attempting to connect."); |
| } |
| else |
| { |
| // Internal consistency error |
| ChipLogError(Ble, "Unknown discovery type. Ignoring scanned device."); |
| return; |
| } |
| |
| mBLEScanConfig.mBleScanState = BleScanState::kConnecting; |
| |
| chip::DeviceLayer::PlatformMgr().LockChipStack(); |
| // We StartScan in the ChipStack thread. |
| // StopScan should also be performed in the ChipStack thread. |
| // At the same time, the scan timer also needs to be canceled in the ChipStack thread. |
| mDeviceScanner.StopScan(); |
| // Stop scanning and then start connecting timer |
| DeviceLayer::SystemLayer().StartTimer(kConnectTimeout, HandleConnectTimeout, &mEndpoint); |
| chip::DeviceLayer::PlatformMgr().UnlockChipStack(); |
| |
| CHIP_ERROR err = mEndpoint.ConnectDevice(device); |
| VerifyOrReturn(err == CHIP_NO_ERROR, ChipLogError(Ble, "Device connection failed: %" CHIP_ERROR_FORMAT, err.Format())); |
| |
| ChipLogProgress(Ble, "New device connected: %s", address); |
| } |
| |
| void BLEManagerImpl::OnScanComplete() |
| { |
| switch (mBLEScanConfig.mBleScanState) |
| { |
| case BleScanState::kNotScanning: |
| ChipLogProgress(Ble, "Scan complete notification without an active scan."); |
| break; |
| case BleScanState::kScanForAddress: |
| case BleScanState::kScanForDiscriminator: |
| mBLEScanConfig.mBleScanState = BleScanState::kNotScanning; |
| ChipLogProgress(Ble, "Scan complete. No matching device found."); |
| break; |
| case BleScanState::kConnecting: |
| break; |
| } |
| } |
| |
| void BLEManagerImpl::OnScanError(CHIP_ERROR err) |
| { |
| BleConnectionDelegate::OnConnectionError(mBLEScanConfig.mAppState, err); |
| ChipLogError(Ble, "BLE scan error: %" CHIP_ERROR_FORMAT, err.Format()); |
| } |
| |
| } // namespace Internal |
| } // namespace DeviceLayer |
| } // namespace chip |
