src/platform/silabs/SilabsConfig.cpp - third_party/github/project-chip/connectedhomeip - Git at Google

 /*
  *
  *    Copyright (c) 2020 Project CHIP Authors
  *    Copyright (c) 2019 Nest Labs, Inc.
  *
  *    Licensed under the Apache License, Version 2.0 (the "License");
  *    you may not use this file except in compliance with the License.
  *    You may obtain a copy of the License at
  *
  *        http://www.apache.org/licenses/LICENSE-2.0
  *
  *    Unless required by applicable law or agreed to in writing, software
  *    distributed under the License is distributed on an "AS IS" BASIS,
  *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  *    See the License for the specific language governing permissions and
  *    limitations under the License.
  */

 /**
  *    @file
  *          Utilities for accessing persisted device configuration on
  *          platforms based on the Silicon Labs SDK.
  */
 #include <platform/silabs/SilabsConfig.h>

 #include <lib/core/CHIPEncoding.h>
 #include <lib/support/CodeUtils.h>
 #include <platform/internal/testing/ConfigUnitTest.h>
 #include <platform/silabs/CHIPDevicePlatformConfig.h>

 #include <nvm3.h>
 #include <nvm3_default.h>
 #include <nvm3_hal_flash.h>
 #include <nvm3_lock.h>

 #include <FreeRTOS.h>
 #include <semphr.h>
 // Substitute the GSDK weak nvm3_lockBegin and nvm3_lockEnd
 // for an application controlled re-entrance protection
 static SemaphoreHandle_t nvm3_Sem;
 static StaticSemaphore_t nvm3_SemStruct;

 void nvm3_lockBegin(void)
 {
     if (nvm3_Sem == NULL)
     {
         nvm3_Sem = xSemaphoreCreateBinaryStatic(&nvm3_SemStruct);
         xSemaphoreGive(nvm3_Sem);
     }

     VerifyOrDie(nvm3_Sem != NULL);
     xSemaphoreTake(nvm3_Sem, portMAX_DELAY);
 }

 void nvm3_lockEnd(void)
 {
     VerifyOrDie(nvm3_Sem != NULL);
     xSemaphoreGive(nvm3_Sem);
 }

 namespace chip {
 namespace DeviceLayer {
 namespace Internal {

 // Matter NVM3 space is placed in the silabs default nvm3 section shared with other stack.
 // 'kMatterNvm3KeyDomain' identify the matter nvm3 domain.
 // The NVM3 default section is placed at end of Flash minus 1 page byt the linker file
 // See examples/platform/efr32/ldscripts/efr32mgXX.ld

 CHIP_ERROR SilabsConfig::Init()
 {
     // nvm3_Sem is created in nvm3_lockBegin()

     return MapNvm3Error(nvm3_open(nvm3_defaultHandle, nvm3_defaultInit));
 }

 void SilabsConfig::DeInit()
 {
     vSemaphoreDelete(nvm3_Sem);
     nvm3_close(nvm3_defaultHandle);
 }

 CHIP_ERROR SilabsConfig::ReadConfigValue(Key key, bool & val)
 {
     CHIP_ERROR err;
     uint32_t objectType;
     size_t dataLen;
     bool tmpVal = 0;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     // Get nvm3 object info.
     err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
     SuccessOrExit(err);

     // Read nvm3 bytes into tmp.
     err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, &tmpVal, dataLen));
     SuccessOrExit(err);
     val = tmpVal;

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::ReadConfigValue(Key key, uint16_t & val)
 {
     CHIP_ERROR err;
     uint32_t objectType;
     size_t dataLen;
     uint16_t tmpVal = 0;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     // Get nvm3 object info.
     err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
     SuccessOrExit(err);

     // Read nvm3 bytes into tmp.
     err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, &tmpVal, dataLen));
     SuccessOrExit(err);
     val = tmpVal;

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::ReadConfigValue(Key key, uint32_t & val)
 {
     CHIP_ERROR err;
     uint32_t objectType;
     size_t dataLen;
     uint32_t tmpVal = 0;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     // Get nvm3 object info.
     err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
     SuccessOrExit(err);

     // Read nvm3 bytes into tmp.
     err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, &tmpVal, dataLen));
     SuccessOrExit(err);
     val = tmpVal;

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::ReadConfigValue(Key key, uint64_t & val)
 {
     CHIP_ERROR err;
     uint32_t objectType;
     size_t dataLen;
     uint64_t tmpVal = 0;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     // Get nvm3 object info.
     err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
     SuccessOrExit(err);

     // Read nvm3 bytes into tmp.
     err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, &tmpVal, dataLen));
     SuccessOrExit(err);
     val = tmpVal;

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::ReadConfigValueStr(Key key, char * buf, size_t bufSize, size_t & outLen)
 {
     CHIP_ERROR err;
     uint32_t objectType;
     size_t dataLen;

     outLen = 0;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     // Get nvm3 object info.
     err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
     SuccessOrExit(err);
     VerifyOrExit(dataLen > 0, err = CHIP_ERROR_INVALID_STRING_LENGTH);

     if (buf != NULL)
     {
         // Read nvm3 bytes directly into the output buffer- check buffer is
         // long enough to take the string (nvm3 string does not include the
         // terminator char).
         VerifyOrExit((bufSize > dataLen), err = CHIP_ERROR_BUFFER_TOO_SMALL);

         err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, buf, dataLen));
         SuccessOrExit(err);

         outLen      = ((dataLen == 1) && (buf[0] == 0)) ? 0 : dataLen;
         buf[outLen] = 0; // Add the terminator char.
     }
     else
     {
         if (dataLen > 1)
         {
             outLen = dataLen;
         }
         else
         {
             // Read the first byte of the nvm3 string into a tmp var.
             char firstByte;
             err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, &firstByte, 1));
             SuccessOrExit(err);

             outLen = (firstByte == 0) ? 0 : dataLen;
         }
     }

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::ReadConfigValueBin(Key key, uint8_t * buf, size_t bufSize, size_t & outLen)
 {
     CHIP_ERROR err;
     uint32_t objectType;
     size_t dataLen;

     outLen = 0;
     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     // Get nvm3 object info.
     err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
     SuccessOrExit(err);
     VerifyOrExit(dataLen > 0, err = CHIP_ERROR_INVALID_STRING_LENGTH);

     if (buf != NULL)
     {
         // Read nvm3 bytes directly into output buffer- check buffer is long
         // enough to take the data.
         VerifyOrExit((bufSize >= dataLen), err = CHIP_ERROR_BUFFER_TOO_SMALL);

         err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, buf, dataLen));
         SuccessOrExit(err);

         outLen = dataLen;
     }

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::ReadConfigValueBin(Key key, uint8_t * buf, size_t bufSize, size_t & outLen, size_t offset)
 {
     CHIP_ERROR err;
     uint32_t objectType;
     size_t dataLen;

     outLen = 0;
     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     // Get nvm3 object info.
     err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
     SuccessOrExit(err);

     if (buf != NULL)
     {
         // Read nvm3 bytes directly into output buffer- check buffer is long enough to take the data
         // else read what we can but return CHIP_ERROR_BUFFER_TOO_SMALL.
         size_t maxReadLength = dataLen - offset;
         if (bufSize >= maxReadLength)
         {
             err = MapNvm3Error(nvm3_readPartialData(nvm3_defaultHandle, key, buf, offset, maxReadLength));
             SuccessOrExit(err);
             outLen = maxReadLength;
         }
         else
         {
             err = MapNvm3Error(nvm3_readPartialData(nvm3_defaultHandle, key, buf, offset, bufSize));
             SuccessOrExit(err);
             // read was successful, but we did not read all the data from the object.
             err    = CHIP_ERROR_BUFFER_TOO_SMALL;
             outLen = bufSize;
         }
     }
 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::ReadConfigValueCounter(uint8_t counterIdx, uint32_t & val)
 {
     CHIP_ERROR err;
     uint32_t tmpVal = 0;
     Key key         = kMinConfigKey_MatterCounter + counterIdx;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     // Read bytes into tmp.
     err = MapNvm3Error(nvm3_readCounter(nvm3_defaultHandle, key, &tmpVal));
     SuccessOrExit(err);
     val = tmpVal;

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::WriteConfigValue(Key key, bool val)
 {
     CHIP_ERROR err;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_ERROR_INVALID_ARGUMENT); // Verify key id.

     err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, &val, sizeof(val)));
     SuccessOrExit(err);

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::WriteConfigValue(Key key, uint16_t val)
 {
     CHIP_ERROR err;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, &val, sizeof(val)));
     SuccessOrExit(err);

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::WriteConfigValue(Key key, uint32_t val)
 {
     CHIP_ERROR err;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, &val, sizeof(val)));
     SuccessOrExit(err);

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::WriteConfigValue(Key key, uint64_t val)
 {
     CHIP_ERROR err;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, &val, sizeof(val)));
     SuccessOrExit(err);

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::WriteConfigValueStr(Key key, const char * str)
 {
     return WriteConfigValueStr(key, str, (str != NULL) ? strlen(str) : 0);
 }

 CHIP_ERROR SilabsConfig::WriteConfigValueStr(Key key, const char * str, size_t strLen)
 {
     CHIP_ERROR err = CHIP_ERROR_INVALID_ARGUMENT;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     if (str != NULL)
     {
         // Write the string to nvm3 without the terminator char (apart from
         // empty strings where only the terminator char is stored in nvm3).
         err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, str, (strLen > 0) ? strLen : 1));
         SuccessOrExit(err);
     }

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::WriteConfigValueBin(Key key, const uint8_t * data, size_t dataLen)
 {
     CHIP_ERROR err = CHIP_ERROR_INVALID_ARGUMENT;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     // Only write NULL pointer if the given size is 0, since in that case, nothing is read at the pointer
     if ((data != NULL) || (dataLen == 0))
     {
         // Write the binary data to nvm3.
         err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, data, dataLen));
         SuccessOrExit(err);
     }

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::WriteConfigValueCounter(uint8_t counterIdx, uint32_t val)
 {
     CHIP_ERROR err;
     Key key = kMinConfigKey_MatterCounter + counterIdx;

     VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

     err = MapNvm3Error(nvm3_writeCounter(nvm3_defaultHandle, key, val));
     SuccessOrExit(err);

 exit:
     return err;
 }

 CHIP_ERROR SilabsConfig::ClearConfigValue(Key key)
 {
     CHIP_ERROR err;

     // Delete the nvm3 object with the given key id.
     err = MapNvm3Error(nvm3_deleteObject(nvm3_defaultHandle, key));
     SuccessOrExit(err);

 exit:
     return err;
 }

 bool SilabsConfig::ConfigValueExists(Key key)
 {
     uint32_t objectType;
     size_t dataLen;

     // Find object with key id.
     CHIP_ERROR err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
     return (err == CHIP_NO_ERROR);
 }

 bool SilabsConfig::ConfigValueExists(Key key, size_t & dataLen)
 {
     uint32_t objectType;
     size_t dLen;

     // Find object with key id.
     CHIP_ERROR err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dLen));

     if (err == CHIP_NO_ERROR)
     {
         dataLen = dLen;
     }

     return (err == CHIP_NO_ERROR);
 }

 CHIP_ERROR SilabsConfig::FactoryResetConfig(void)
 {
     // Deletes all nvm3 'Config' type objects.
     // Note- 'Factory' and 'Counter' type nvm3 objects are NOT deleted.

     CHIP_ERROR err;

     // Iterate over all the CHIP Config nvm3 records and delete each one...
     err = ForEachRecord(kMinConfigKey_MatterConfig, kMaxConfigKey_MatterConfig, false,
                         [](const Key & nvm3Key, const size_t & length) -> CHIP_ERROR {
                             CHIP_ERROR err2;
                             // Delete the nvm3 object with the given key id.
                             err2 = ClearConfigValue(nvm3Key);
                             SuccessOrExit(err2);

                         exit:
                             return err2;
                         });

     return err;
 }

 CHIP_ERROR SilabsConfig::MapNvm3Error(Ecode_t nvm3Res)
 {
     CHIP_ERROR err;

     switch (nvm3Res)
     {
     case ECODE_NVM3_OK:
         err = CHIP_NO_ERROR;
         break;
     case ECODE_NVM3_ERR_KEY_NOT_FOUND:
         err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND;
         break;
     default:
         err = CHIP_ERROR(ChipError::Range::kPlatform, (nvm3Res & 0xFF) + CHIP_DEVICE_CONFIG_SILABS_NVM3_ERROR_MIN);
         break;
     }

     return err;
 }

 CHIP_ERROR SilabsConfig::ForEachRecord(Key firstNvm3Key, Key lastNvm3Key, bool addNewRecord, ForEachRecordFunct funct)
 {
     // Iterates through the specified range of nvm3 object key ids.
     // Invokes the callers CB function when appropriate.

     CHIP_ERROR err = CHIP_NO_ERROR;

     for (Key nvm3Key = firstNvm3Key; nvm3Key <= lastNvm3Key; ++nvm3Key)
     {
         Ecode_t nvm3Res;
         uint32_t objectType;
         size_t dataLen;

         // Find nvm3 object with current nvm3 iteration key.
         nvm3Res = nvm3_getObjectInfo(nvm3_defaultHandle, nvm3Key, &objectType, &dataLen);
         switch (nvm3Res)
         {
         case ECODE_NVM3_OK:
             if (!addNewRecord)
             {
                 // Invoke the caller's function
                 // (for retrieve,store,delete,enumerate GroupKey operations).
                 err = funct(nvm3Key, dataLen);
             }
             break;
         case ECODE_NVM3_ERR_KEY_NOT_FOUND:
             if (addNewRecord)
             {
                 // Invoke caller's function
                 // (for add GroupKey operation).
                 err = funct(nvm3Key, dataLen);
             }
             break;
         default:
             err = MapNvm3Error(nvm3Res);
             break;
         }

         SuccessOrExit(err);
     }

 exit:;
     return err;
 }

 bool SilabsConfig::ValidConfigKey(Key key)
 {
     // Returns true if the key is in the Matter nvm3 reserved key range.
     // or if the key is in the User Domain key range
     // Additional check validates that the user consciously defined the expected key range
     if (((key >= kMatterNvm3KeyLoLimit) && (key <= kMatterNvm3KeyHiLimit) && (key >= kMinConfigKey_MatterFactory) &&
          (key <= kMaxConfigKey_MatterKvs)) ||
         ((key >= kUserNvm3KeyDomainLoLimit) && (key <= kUserNvm3KeyDomainHiLimit)))
     {
         return true;
     }

     return false;
 }

 #if CONFIG_BUILD_FOR_HOST_UNIT_TEST
 void SilabsConfig::RunConfigUnitTest()
 {
     // Run common unit test.
     ::chip::DeviceLayer::Internal::RunConfigUnitTest<SilabsConfig>();
 }
 #endif // CONFIG_BUILD_FOR_HOST_UNIT_TEST

 void SilabsConfig::RepackNvm3Flash(void)
 {
     // Repack nvm3 flash if nvm3 space < headroom threshold.
     // Note- checking periodically during idle periods should prevent
     // forced repack events on any write operation.
     nvm3_repack(nvm3_defaultHandle);
 }

 } // namespace Internal
 } // namespace DeviceLayer
 } // namespace chip
	/*
	*
	* Copyright (c) 2020 Project CHIP Authors
	* Copyright (c) 2019 Nest Labs, Inc.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	/**
	* @file
	* Utilities for accessing persisted device configuration on
	* platforms based on the Silicon Labs SDK.
	*/
	#include <platform/silabs/SilabsConfig.h>

	#include <lib/core/CHIPEncoding.h>
	#include <lib/support/CodeUtils.h>
	#include <platform/internal/testing/ConfigUnitTest.h>
	#include <platform/silabs/CHIPDevicePlatformConfig.h>

	#include <nvm3.h>
	#include <nvm3_default.h>
	#include <nvm3_hal_flash.h>
	#include <nvm3_lock.h>

	#include <FreeRTOS.h>
	#include <semphr.h>
	// Substitute the GSDK weak nvm3_lockBegin and nvm3_lockEnd
	// for an application controlled re-entrance protection
	static SemaphoreHandle_t nvm3_Sem;
	static StaticSemaphore_t nvm3_SemStruct;

	void nvm3_lockBegin(void)
	{
	if (nvm3_Sem == NULL)
	{
	nvm3_Sem = xSemaphoreCreateBinaryStatic(&nvm3_SemStruct);
	xSemaphoreGive(nvm3_Sem);
	}

	VerifyOrDie(nvm3_Sem != NULL);
	xSemaphoreTake(nvm3_Sem, portMAX_DELAY);
	}

	void nvm3_lockEnd(void)
	{
	VerifyOrDie(nvm3_Sem != NULL);
	xSemaphoreGive(nvm3_Sem);
	}

	namespace chip {
	namespace DeviceLayer {
	namespace Internal {

	// Matter NVM3 space is placed in the silabs default nvm3 section shared with other stack.
	// 'kMatterNvm3KeyDomain' identify the matter nvm3 domain.
	// The NVM3 default section is placed at end of Flash minus 1 page byt the linker file
	// See examples/platform/efr32/ldscripts/efr32mgXX.ld

	CHIP_ERROR SilabsConfig::Init()
	{
	// nvm3_Sem is created in nvm3_lockBegin()

	return MapNvm3Error(nvm3_open(nvm3_defaultHandle, nvm3_defaultInit));
	}

	void SilabsConfig::DeInit()
	{
	vSemaphoreDelete(nvm3_Sem);
	nvm3_close(nvm3_defaultHandle);
	}

	CHIP_ERROR SilabsConfig::ReadConfigValue(Key key, bool & val)
	{
	CHIP_ERROR err;
	uint32_t objectType;
	size_t dataLen;
	bool tmpVal = 0;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	// Get nvm3 object info.
	err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
	SuccessOrExit(err);

	// Read nvm3 bytes into tmp.
	err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, &tmpVal, dataLen));
	SuccessOrExit(err);
	val = tmpVal;

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::ReadConfigValue(Key key, uint16_t & val)
	{
	CHIP_ERROR err;
	uint32_t objectType;
	size_t dataLen;
	uint16_t tmpVal = 0;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	// Get nvm3 object info.
	err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
	SuccessOrExit(err);

	// Read nvm3 bytes into tmp.
	err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, &tmpVal, dataLen));
	SuccessOrExit(err);
	val = tmpVal;

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::ReadConfigValue(Key key, uint32_t & val)
	{
	CHIP_ERROR err;
	uint32_t objectType;
	size_t dataLen;
	uint32_t tmpVal = 0;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	// Get nvm3 object info.
	err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
	SuccessOrExit(err);

	// Read nvm3 bytes into tmp.
	err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, &tmpVal, dataLen));
	SuccessOrExit(err);
	val = tmpVal;

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::ReadConfigValue(Key key, uint64_t & val)
	{
	CHIP_ERROR err;
	uint32_t objectType;
	size_t dataLen;
	uint64_t tmpVal = 0;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	// Get nvm3 object info.
	err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
	SuccessOrExit(err);

	// Read nvm3 bytes into tmp.
	err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, &tmpVal, dataLen));
	SuccessOrExit(err);
	val = tmpVal;

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::ReadConfigValueStr(Key key, char * buf, size_t bufSize, size_t & outLen)
	{
	CHIP_ERROR err;
	uint32_t objectType;
	size_t dataLen;

	outLen = 0;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	// Get nvm3 object info.
	err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
	SuccessOrExit(err);
	VerifyOrExit(dataLen > 0, err = CHIP_ERROR_INVALID_STRING_LENGTH);

	if (buf != NULL)
	{
	// Read nvm3 bytes directly into the output buffer- check buffer is
	// long enough to take the string (nvm3 string does not include the
	// terminator char).
	VerifyOrExit((bufSize > dataLen), err = CHIP_ERROR_BUFFER_TOO_SMALL);

	err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, buf, dataLen));
	SuccessOrExit(err);

	outLen = ((dataLen == 1) && (buf[0] == 0)) ? 0 : dataLen;
	buf[outLen] = 0; // Add the terminator char.
	}
	else
	{
	if (dataLen > 1)
	{
	outLen = dataLen;
	}
	else
	{
	// Read the first byte of the nvm3 string into a tmp var.
	char firstByte;
	err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, &firstByte, 1));
	SuccessOrExit(err);

	outLen = (firstByte == 0) ? 0 : dataLen;
	}
	}

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::ReadConfigValueBin(Key key, uint8_t * buf, size_t bufSize, size_t & outLen)
	{
	CHIP_ERROR err;
	uint32_t objectType;
	size_t dataLen;

	outLen = 0;
	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	// Get nvm3 object info.
	err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
	SuccessOrExit(err);
	VerifyOrExit(dataLen > 0, err = CHIP_ERROR_INVALID_STRING_LENGTH);

	if (buf != NULL)
	{
	// Read nvm3 bytes directly into output buffer- check buffer is long
	// enough to take the data.
	VerifyOrExit((bufSize >= dataLen), err = CHIP_ERROR_BUFFER_TOO_SMALL);

	err = MapNvm3Error(nvm3_readData(nvm3_defaultHandle, key, buf, dataLen));
	SuccessOrExit(err);

	outLen = dataLen;
	}

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::ReadConfigValueBin(Key key, uint8_t * buf, size_t bufSize, size_t & outLen, size_t offset)
	{
	CHIP_ERROR err;
	uint32_t objectType;
	size_t dataLen;

	outLen = 0;
	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	// Get nvm3 object info.
	err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
	SuccessOrExit(err);

	if (buf != NULL)
	{
	// Read nvm3 bytes directly into output buffer- check buffer is long enough to take the data
	// else read what we can but return CHIP_ERROR_BUFFER_TOO_SMALL.
	size_t maxReadLength = dataLen - offset;
	if (bufSize >= maxReadLength)
	{
	err = MapNvm3Error(nvm3_readPartialData(nvm3_defaultHandle, key, buf, offset, maxReadLength));
	SuccessOrExit(err);
	outLen = maxReadLength;
	}
	else
	{
	err = MapNvm3Error(nvm3_readPartialData(nvm3_defaultHandle, key, buf, offset, bufSize));
	SuccessOrExit(err);
	// read was successful, but we did not read all the data from the object.
	err = CHIP_ERROR_BUFFER_TOO_SMALL;
	outLen = bufSize;
	}
	}
	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::ReadConfigValueCounter(uint8_t counterIdx, uint32_t & val)
	{
	CHIP_ERROR err;
	uint32_t tmpVal = 0;
	Key key = kMinConfigKey_MatterCounter + counterIdx;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	// Read bytes into tmp.
	err = MapNvm3Error(nvm3_readCounter(nvm3_defaultHandle, key, &tmpVal));
	SuccessOrExit(err);
	val = tmpVal;

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::WriteConfigValue(Key key, bool val)
	{
	CHIP_ERROR err;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_ERROR_INVALID_ARGUMENT); // Verify key id.

	err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, &val, sizeof(val)));
	SuccessOrExit(err);

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::WriteConfigValue(Key key, uint16_t val)
	{
	CHIP_ERROR err;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, &val, sizeof(val)));
	SuccessOrExit(err);

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::WriteConfigValue(Key key, uint32_t val)
	{
	CHIP_ERROR err;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, &val, sizeof(val)));
	SuccessOrExit(err);

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::WriteConfigValue(Key key, uint64_t val)
	{
	CHIP_ERROR err;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, &val, sizeof(val)));
	SuccessOrExit(err);

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::WriteConfigValueStr(Key key, const char * str)
	{
	return WriteConfigValueStr(key, str, (str != NULL) ? strlen(str) : 0);
	}

	CHIP_ERROR SilabsConfig::WriteConfigValueStr(Key key, const char * str, size_t strLen)
	{
	CHIP_ERROR err = CHIP_ERROR_INVALID_ARGUMENT;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	if (str != NULL)
	{
	// Write the string to nvm3 without the terminator char (apart from
	// empty strings where only the terminator char is stored in nvm3).
	err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, str, (strLen > 0) ? strLen : 1));
	SuccessOrExit(err);
	}

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::WriteConfigValueBin(Key key, const uint8_t * data, size_t dataLen)
	{
	CHIP_ERROR err = CHIP_ERROR_INVALID_ARGUMENT;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	// Only write NULL pointer if the given size is 0, since in that case, nothing is read at the pointer
	if ((data != NULL) \|\| (dataLen == 0))
	{
	// Write the binary data to nvm3.
	err = MapNvm3Error(nvm3_writeData(nvm3_defaultHandle, key, data, dataLen));
	SuccessOrExit(err);
	}

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::WriteConfigValueCounter(uint8_t counterIdx, uint32_t val)
	{
	CHIP_ERROR err;
	Key key = kMinConfigKey_MatterCounter + counterIdx;

	VerifyOrExit(ValidConfigKey(key), err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND); // Verify key id.

	err = MapNvm3Error(nvm3_writeCounter(nvm3_defaultHandle, key, val));
	SuccessOrExit(err);

	exit:
	return err;
	}

	CHIP_ERROR SilabsConfig::ClearConfigValue(Key key)
	{
	CHIP_ERROR err;

	// Delete the nvm3 object with the given key id.
	err = MapNvm3Error(nvm3_deleteObject(nvm3_defaultHandle, key));
	SuccessOrExit(err);

	exit:
	return err;
	}

	bool SilabsConfig::ConfigValueExists(Key key)
	{
	uint32_t objectType;
	size_t dataLen;

	// Find object with key id.
	CHIP_ERROR err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dataLen));
	return (err == CHIP_NO_ERROR);
	}

	bool SilabsConfig::ConfigValueExists(Key key, size_t & dataLen)
	{
	uint32_t objectType;
	size_t dLen;

	// Find object with key id.
	CHIP_ERROR err = MapNvm3Error(nvm3_getObjectInfo(nvm3_defaultHandle, key, &objectType, &dLen));

	if (err == CHIP_NO_ERROR)
	{
	dataLen = dLen;
	}

	return (err == CHIP_NO_ERROR);
	}

	CHIP_ERROR SilabsConfig::FactoryResetConfig(void)
	{
	// Deletes all nvm3 'Config' type objects.
	// Note- 'Factory' and 'Counter' type nvm3 objects are NOT deleted.

	CHIP_ERROR err;

	// Iterate over all the CHIP Config nvm3 records and delete each one...
	err = ForEachRecord(kMinConfigKey_MatterConfig, kMaxConfigKey_MatterConfig, false,
	[](const Key & nvm3Key, const size_t & length) -> CHIP_ERROR {
	CHIP_ERROR err2;
	// Delete the nvm3 object with the given key id.
	err2 = ClearConfigValue(nvm3Key);
	SuccessOrExit(err2);

	exit:
	return err2;
	});

	return err;
	}

	CHIP_ERROR SilabsConfig::MapNvm3Error(Ecode_t nvm3Res)
	{
	CHIP_ERROR err;

	switch (nvm3Res)
	{
	case ECODE_NVM3_OK:
	err = CHIP_NO_ERROR;
	break;
	case ECODE_NVM3_ERR_KEY_NOT_FOUND:
	err = CHIP_DEVICE_ERROR_CONFIG_NOT_FOUND;
	break;
	default:
	err = CHIP_ERROR(ChipError::Range::kPlatform, (nvm3Res & 0xFF) + CHIP_DEVICE_CONFIG_SILABS_NVM3_ERROR_MIN);
	break;
	}

	return err;
	}

	CHIP_ERROR SilabsConfig::ForEachRecord(Key firstNvm3Key, Key lastNvm3Key, bool addNewRecord, ForEachRecordFunct funct)
	{
	// Iterates through the specified range of nvm3 object key ids.
	// Invokes the callers CB function when appropriate.

	CHIP_ERROR err = CHIP_NO_ERROR;

	for (Key nvm3Key = firstNvm3Key; nvm3Key <= lastNvm3Key; ++nvm3Key)
	{
	Ecode_t nvm3Res;
	uint32_t objectType;
	size_t dataLen;

	// Find nvm3 object with current nvm3 iteration key.
	nvm3Res = nvm3_getObjectInfo(nvm3_defaultHandle, nvm3Key, &objectType, &dataLen);
	switch (nvm3Res)
	{
	case ECODE_NVM3_OK:
	if (!addNewRecord)
	{
	// Invoke the caller's function
	// (for retrieve,store,delete,enumerate GroupKey operations).
	err = funct(nvm3Key, dataLen);
	}
	break;
	case ECODE_NVM3_ERR_KEY_NOT_FOUND:
	if (addNewRecord)
	{
	// Invoke caller's function
	// (for add GroupKey operation).
	err = funct(nvm3Key, dataLen);
	}
	break;
	default:
	err = MapNvm3Error(nvm3Res);
	break;
	}

	SuccessOrExit(err);
	}

	exit:;
	return err;
	}

	bool SilabsConfig::ValidConfigKey(Key key)
	{
	// Returns true if the key is in the Matter nvm3 reserved key range.
	// or if the key is in the User Domain key range
	// Additional check validates that the user consciously defined the expected key range
	if (((key >= kMatterNvm3KeyLoLimit) && (key <= kMatterNvm3KeyHiLimit) && (key >= kMinConfigKey_MatterFactory) &&
	(key <= kMaxConfigKey_MatterKvs)) \|\|
	((key >= kUserNvm3KeyDomainLoLimit) && (key <= kUserNvm3KeyDomainHiLimit)))
	{
	return true;
	}

	return false;
	}

	#if CONFIG_BUILD_FOR_HOST_UNIT_TEST
	void SilabsConfig::RunConfigUnitTest()
	{
	// Run common unit test.
	::chip::DeviceLayer::Internal::RunConfigUnitTest<SilabsConfig>();
	}
	#endif // CONFIG_BUILD_FOR_HOST_UNIT_TEST

	void SilabsConfig::RepackNvm3Flash(void)
	{
	// Repack nvm3 flash if nvm3 space < headroom threshold.
	// Note- checking periodically during idle periods should prevent
	// forced repack events on any write operation.
	nvm3_repack(nvm3_defaultHandle);
	}

	} // namespace Internal
	} // namespace DeviceLayer
	} // namespace chip