| /* |
| * |
| * Copyright (c) 2020-2022 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define __ZEPHYR__ 1 |
| #define CONFIG_EVENTFD 0 |
| #include <platform/internal/CHIPDeviceLayerInternal.h> |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE |
| |
| #include <ble/CHIPBleServiceData.h> |
| #include <lib/support/CHIPMemString.h> |
| #include <platform/DeviceInstanceInfoProvider.h> |
| #include <platform/internal/BLEManager.h> |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| #include <setup_payload/AdditionalDataPayloadGenerator.h> |
| #endif |
| |
| extern "C" { |
| #if CHIP_DEVICE_LAYER_TARGET_BL702L |
| #include <btble_lib_api.h> |
| #else |
| #include <ble_lib_api.h> |
| #endif |
| } |
| |
| #include <bluetooth/addr.h> |
| #include <hci_driver.h> |
| |
| #include "BLEManagerImpl.h" |
| |
| using namespace ::chip; |
| using namespace ::chip::Ble; |
| using namespace ::chip::System; |
| |
| namespace chip { |
| namespace DeviceLayer { |
| namespace Internal { |
| |
| const bt_uuid_128 UUID128_CHIPoBLEChar_RX = |
| BT_UUID_INIT_128(0x11, 0x9D, 0x9F, 0x42, 0x9C, 0x4F, 0x9F, 0x95, 0x59, 0x45, 0x3D, 0x26, 0xF5, 0x2E, 0xEE, 0x18); |
| const bt_uuid_128 UUID128_CHIPoBLEChar_TX = |
| BT_UUID_INIT_128(0x12, 0x9D, 0x9F, 0x42, 0x9C, 0x4F, 0x9F, 0x95, 0x59, 0x45, 0x3D, 0x26, 0xF5, 0x2E, 0xEE, 0x18); |
| bt_uuid_16 UUID16_CHIPoBLEService = BT_UUID_INIT_16(0xFFF6); |
| |
| const ChipBleUUID chipUUID_CHIPoBLEChar_RX = { { 0x18, 0xEE, 0x2E, 0xF5, 0x26, 0x3D, 0x45, 0x59, 0x95, 0x9F, 0x4F, 0x9C, 0x42, 0x9F, |
| 0x9D, 0x11 } }; |
| |
| const ChipBleUUID chipUUID_CHIPoBLEChar_TX = { { 0x18, 0xEE, 0x2E, 0xF5, 0x26, 0x3D, 0x45, 0x59, 0x95, 0x9F, 0x4F, 0x9C, 0x42, 0x9F, |
| 0x9D, 0x12 } }; |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| const bt_uuid_128 UUID128_CHIPoBLEChar_C3 = |
| BT_UUID_INIT_128(0x04, 0x8F, 0x21, 0x83, 0x8A, 0x74, 0x7D, 0xB8, 0xF2, 0x45, 0x72, 0x87, 0x38, 0x02, 0x63, 0x64); |
| #endif |
| |
| _bt_gatt_ccc CHIPoBLEChar_TX_CCC = BT_GATT_CCC_INITIALIZER(nullptr, BLEManagerImpl::HandleTXCCCWrite, nullptr); |
| |
| struct bt_gatt_attr sChipoBleAttributes[] = { |
| BT_GATT_PRIMARY_SERVICE(&UUID16_CHIPoBLEService.uuid), |
| BT_GATT_CHARACTERISTIC(&UUID128_CHIPoBLEChar_RX.uuid, BT_GATT_CHRC_WRITE | BT_GATT_CHRC_WRITE_WITHOUT_RESP, |
| BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, nullptr, BLEManagerImpl::HandleRXWrite, nullptr), |
| BT_GATT_CHARACTERISTIC(&UUID128_CHIPoBLEChar_TX.uuid, BT_GATT_CHRC_INDICATE, BT_GATT_PERM_NONE, nullptr, nullptr, nullptr), |
| BT_GATT_CCC_MANAGED(&CHIPoBLEChar_TX_CCC, BT_GATT_PERM_READ | BT_GATT_PERM_WRITE), |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| BT_GATT_CHARACTERISTIC(&UUID128_CHIPoBLEChar_C3.uuid, BT_GATT_CHRC_READ, BT_GATT_PERM_READ, BLEManagerImpl::HandleC3Read, |
| nullptr, nullptr), |
| #endif |
| }; |
| |
| struct bt_gatt_service sChipoBleService = { |
| .attrs = sChipoBleAttributes, |
| .attr_count = sizeof(sChipoBleAttributes) / sizeof(sChipoBleAttributes[0]), |
| }; |
| |
| static const int kCHIPoBLE_CCC_AttributeIndex = 3; |
| |
| CHIP_ERROR InitRandomStaticAddress() |
| { |
| // When the BT privacy feature is disabled, generate a random static address once per boot. |
| // This must be done before bt_enable() has been called. |
| bt_addr_le_t addr; |
| |
| int error = bt_addr_le_create_static(&addr); |
| if (error) |
| { |
| ChipLogError(DeviceLayer, "Failed to create BLE address: %d", error); |
| return System::MapErrorZephyr(error); |
| } |
| |
| error = bt_id_create(&addr, nullptr); |
| |
| if (error < 0) |
| { |
| ChipLogError(DeviceLayer, "Failed to create BLE identity: %d", error); |
| return System::MapErrorZephyr(error); |
| } |
| |
| ChipLogProgress(DeviceLayer, "BLE address: %02X:%02X:%02X:%02X:%02X:%02X", addr.a.val[5], addr.a.val[4], addr.a.val[3], |
| addr.a.val[2], addr.a.val[1], addr.a.val[0]); |
| return CHIP_NO_ERROR; |
| } |
| |
| BLEManagerImpl BLEManagerImpl::sInstance; |
| |
| CHIP_ERROR BLEManagerImpl::_Init() |
| { |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Enabled; |
| mFlags.ClearAll().Set(Flags::kAdvertisingEnabled, CHIP_DEVICE_CONFIG_CHIPOBLE_ENABLE_ADVERTISING_AUTOSTART); |
| mFlags.Set(Flags::kFastAdvertisingEnabled, true); |
| mGAPConns = 0; |
| |
| memset(mSubscribedConns, 0, sizeof(mSubscribedConns)); |
| |
| ReturnErrorOnFailure(InitRandomStaticAddress()); |
| #if CHIP_DEVICE_LAYER_TARGET_BL702L |
| btble_controller_init(configMAX_PRIORITIES - 1); |
| #else |
| ble_controller_init(configMAX_PRIORITIES - 1); |
| #endif |
| hci_driver_init(); |
| bt_enable(NULL); |
| |
| memset(&mConnCallbacks, 0, sizeof(mConnCallbacks)); |
| mConnCallbacks.connected = HandleConnect; |
| mConnCallbacks.disconnected = HandleDisconnect; |
| |
| bt_conn_cb_register(&mConnCallbacks); |
| |
| // Initialize the CHIP BleLayer. |
| ReturnErrorOnFailure(BleLayer::Init(this, this, &DeviceLayer::SystemLayer())); |
| |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| void BLEManagerImpl::_Shutdown() |
| { |
| // Release BLE Stack resources |
| mFlags.Set(Flags::kChipoBleShutDown); |
| } |
| |
| void BLEManagerImpl::DriveBLEState(intptr_t arg) |
| { |
| BLEMgrImpl().DriveBLEState(); |
| } |
| |
| void BLEManagerImpl::DriveBLEState() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| // Perform any initialization actions that must occur after the CHIP task is running. |
| if (!mFlags.Has(Flags::kAsyncInitCompleted)) |
| { |
| mFlags.Set(Flags::kAsyncInitCompleted); |
| } |
| |
| // If the application has enabled CHIPoBLE and BLE advertising... |
| if (mServiceMode == ConnectivityManager::kCHIPoBLEServiceMode_Enabled && |
| mFlags.Has(Flags::kAdvertisingEnabled) |
| #if CHIP_DEVICE_CONFIG_CHIPOBLE_SINGLE_CONNECTION |
| // and no connections are active... |
| && (NumConnections() == 0) |
| #endif |
| ) |
| { |
| // Start/re-start advertising if not already advertising, or if the |
| // advertising state needs to be refreshed. |
| if (!mFlags.Has(Flags::kAdvertising) || mFlags.Has(Flags::kAdvertisingRefreshNeeded)) |
| { |
| mFlags.Clear(Flags::kAdvertisingRefreshNeeded); |
| err = StartAdvertising(); |
| SuccessOrExit(err); |
| } |
| } |
| else |
| { |
| if (mFlags.Has(Flags::kAdvertising)) |
| { |
| err = StopAdvertising(); |
| SuccessOrExit(err); |
| } |
| |
| // If no connections are active unregister also CHIPoBLE GATT service |
| if (NumConnections() == 0 && mFlags.Has(Flags::kChipoBleGattServiceRegister)) |
| { |
| // Unregister CHIPoBLE service to not allow discovering it when pairing is disabled. |
| if (bt_gatt_service_unregister(&sChipoBleService) != 0) |
| { |
| ChipLogError(DeviceLayer, "Failed to unregister CHIPoBLE GATT service"); |
| } |
| else |
| { |
| mFlags.Clear(Flags::kChipoBleGattServiceRegister); |
| } |
| } |
| } |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Disabling CHIPoBLE service due to error: %s", ErrorStr(err)); |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Disabled; |
| } |
| } |
| |
| struct BLEManagerImpl::ServiceData |
| { |
| uint8_t uuid[2]; |
| ChipBLEDeviceIdentificationInfo deviceIdInfo; |
| } __attribute__((packed)); |
| |
| CHIP_ERROR BLEManagerImpl::StartAdvertising(void) |
| { |
| int err = 0; |
| const bool isAdvertisingRerun = mFlags.Has(Flags::kAdvertising); |
| |
| // At first run always select fast advertising, on the next attempt slow down interval. |
| const uint32_t intervalMin = mFlags.Has(Flags::kFastAdvertisingEnabled) ? CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MIN |
| : CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MIN; |
| const uint32_t intervalMax = mFlags.Has(Flags::kFastAdvertisingEnabled) ? CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MAX |
| : CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MAX; |
| |
| bt_le_adv_param advParams; |
| advParams.id = BT_ID_DEFAULT; |
| advParams.options = BT_LE_ADV_OPT_CONNECTABLE | BT_LE_ADV_OPT_ONE_TIME; |
| advParams.interval_min = intervalMin; |
| advParams.interval_max = intervalMax; |
| |
| // Define advertising and, if BLE device name is set, scan response data |
| ServiceData serviceData; |
| const uint8_t advFlags = BT_LE_AD_GENERAL | BT_LE_AD_NO_BREDR; |
| const bt_data advertisingData[] = { BT_DATA(BT_DATA_FLAGS, &advFlags, sizeof(advFlags)), |
| BT_DATA(BT_DATA_SVC_DATA16, &serviceData, sizeof(serviceData)) }; |
| |
| const char * deviceName = bt_get_name(); |
| const uint8_t deviceNameSize = static_cast<uint8_t>(strlen(deviceName)); |
| const bt_data scanResponseData[] = { BT_DATA(BT_DATA_NAME_COMPLETE, deviceName, deviceNameSize) }; |
| const bt_data * scanResponseDataPtr = deviceNameSize > 0 ? scanResponseData : nullptr; |
| const size_t scanResponseDataLen = deviceNameSize > 0 ? sizeof(scanResponseData) / sizeof(scanResponseData[0]) : 0u; |
| |
| // Register dynamically CHIPoBLE GATT service |
| if (!mFlags.Has(Flags::kChipoBleGattServiceRegister)) |
| { |
| err = bt_gatt_service_register(&sChipoBleService); |
| |
| if (err != 0) |
| ChipLogError(DeviceLayer, "Failed to register CHIPoBLE GATT service"); |
| |
| VerifyOrReturnError(err == 0, MapErrorZephyr(err)); |
| |
| mFlags.Set(Flags::kChipoBleGattServiceRegister); |
| } |
| |
| // Initialize service data |
| static_assert(sizeof(serviceData) == 10, "Size of BLE advertisement data changed! Was that intentional?"); |
| chip::Encoding::LittleEndian::Put16(serviceData.uuid, UUID16_CHIPoBLEService.val); |
| ReturnErrorOnFailure(ConfigurationMgr().GetBLEDeviceIdentificationInfo(serviceData.deviceIdInfo)); |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| ReturnErrorOnFailure(PrepareC3CharData()); |
| #endif |
| |
| if (!isAdvertisingRerun) |
| { |
| #ifdef CONFIG_BT_PRIVACY |
| static_assert(CHIP_DEVICE_CONFIG_DISCOVERY_TIMEOUT_SECS <= CONFIG_BT_RPA_TIMEOUT, |
| "BLE advertising timeout is too long relative to RPA timeout"); |
| // Generate new private BLE address |
| bt_le_oob bleOobInfo; |
| err = bt_le_oob_get_local(advParams.id, &bleOobInfo); |
| VerifyOrReturnError(err == 0, MapErrorZephyr(err)); |
| #endif // CONFIG_BT_PRIVACY |
| } |
| |
| // Restart advertising |
| err = bt_le_adv_stop(); |
| VerifyOrReturnError(err == 0, MapErrorZephyr(err)); |
| |
| err = bt_le_adv_start(&advParams, advertisingData, sizeof(advertisingData) / sizeof(advertisingData[0]), scanResponseDataPtr, |
| scanResponseDataLen); |
| VerifyOrReturnError(err == 0, MapErrorZephyr(err)); |
| |
| // Transition to the Advertising state... |
| if (!mFlags.Has(Flags::kAdvertising)) |
| { |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising started"); |
| |
| mFlags.Set(Flags::kAdvertising); |
| |
| // Post a CHIPoBLEAdvertisingChange(Started) event. |
| { |
| ChipDeviceEvent advChange; |
| advChange.Type = DeviceEventType::kCHIPoBLEAdvertisingChange; |
| advChange.CHIPoBLEAdvertisingChange.Result = kActivity_Started; |
| ReturnErrorOnFailure(PlatformMgr().PostEvent(&advChange)); |
| } |
| |
| if (mFlags.Has(Flags::kFastAdvertisingEnabled)) |
| { |
| // Start timer to change advertising interval. |
| DeviceLayer::SystemLayer().StartTimer( |
| System::Clock::Milliseconds32(CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME), |
| HandleBLEAdvertisementIntervalChange, this); |
| } |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::StopAdvertising(void) |
| { |
| int err = bt_le_adv_stop(); |
| VerifyOrReturnError(err == 0, MapErrorZephyr(err)); |
| |
| // Transition to the not Advertising state... |
| if (mFlags.Has(Flags::kAdvertising)) |
| { |
| mFlags.Clear(Flags::kAdvertising); |
| mFlags.Set(Flags::kFastAdvertisingEnabled, true); |
| |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising stopped"); |
| |
| // Post a CHIPoBLEAdvertisingChange(Stopped) event. |
| { |
| ChipDeviceEvent advChange; |
| advChange.Type = DeviceEventType::kCHIPoBLEAdvertisingChange; |
| advChange.CHIPoBLEAdvertisingChange.Result = kActivity_Stopped; |
| ReturnErrorOnFailure(PlatformMgr().PostEvent(&advChange)); |
| } |
| |
| // Cancel timer event changing CHIPoBLE advertisement interval |
| DeviceLayer::SystemLayer().CancelTimer(HandleBLEAdvertisementIntervalChange, this); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetAdvertisingEnabled(bool val) |
| { |
| VerifyOrReturnError(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, |
| CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| if (mFlags.Has(Flags::kAdvertisingEnabled) != val) |
| { |
| ChipLogDetail(DeviceLayer, "CHIPoBLE advertising set to %s", val ? "on" : "off"); |
| |
| mFlags.Set(Flags::kAdvertisingEnabled, val); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetAdvertisingMode(BLEAdvertisingMode mode) |
| { |
| switch (mode) |
| { |
| case BLEAdvertisingMode::kFastAdvertising: |
| mFlags.Set(Flags::kFastAdvertisingEnabled, true); |
| break; |
| case BLEAdvertisingMode::kSlowAdvertising: |
| mFlags.Set(Flags::kFastAdvertisingEnabled, false); |
| break; |
| default: |
| return CHIP_ERROR_INVALID_ARGUMENT; |
| } |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_GetDeviceName(char * buf, size_t bufSize) |
| { |
| Platform::CopyString(buf, bufSize, bt_get_name()); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetDeviceName(const char * deviceName) |
| { |
| if (mServiceMode == ConnectivityManager::kCHIPoBLEServiceMode_NotSupported) |
| { |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| } |
| |
| ChipLogDetail(DeviceLayer, "Device name set to: %s", StringOrNullMarker(deviceName)); |
| return MapErrorZephyr(bt_set_name(deviceName)); |
| } |
| |
| CHIP_ERROR BLEManagerImpl::HandleGAPConnect(const ChipDeviceEvent * event) |
| { |
| const BleConnEventType * connEvent = &event->Platform.BleConnEvent; |
| |
| if (connEvent->HciResult == BT_HCI_ERR_SUCCESS) |
| { |
| ChipLogProgress(DeviceLayer, "BLE connection established (ConnId: 0x%02x)", bt_conn_index(connEvent->BtConn)); |
| mGAPConns++; |
| } |
| else |
| { |
| ChipLogError(DeviceLayer, "BLE connection failed (reason: 0x%02x)", connEvent->HciResult); |
| } |
| |
| ChipLogProgress(DeviceLayer, "Current number of connections: %u/%u", NumConnections(), CONFIG_BT_MAX_CONN); |
| |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| |
| bt_conn_unref(connEvent->BtConn); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::HandleGAPDisconnect(const ChipDeviceEvent * event) |
| { |
| const BleConnEventType * connEvent = &event->Platform.BleConnEvent; |
| |
| ChipLogProgress(DeviceLayer, "BLE GAP connection terminated (reason 0x%02x)", connEvent->HciResult); |
| |
| mGAPConns--; |
| |
| // If indications were enabled for this connection, record that they are now disabled and |
| // notify the BLE Layer of a disconnect. |
| if (UnsetSubscribed(connEvent->BtConn)) |
| { |
| CHIP_ERROR disconReason; |
| switch (connEvent->HciResult) |
| { |
| case BT_HCI_ERR_REMOTE_USER_TERM_CONN: |
| // Do not treat proper connection termination as an error and exit. |
| VerifyOrExit(!ConfigurationMgr().IsFullyProvisioned(), BLEMgrImpl()._Shutdown()); |
| disconReason = BLE_ERROR_REMOTE_DEVICE_DISCONNECTED; |
| break; |
| case BT_HCI_ERR_LOCALHOST_TERM_CONN: |
| disconReason = BLE_ERROR_APP_CLOSED_CONNECTION; |
| break; |
| default: |
| disconReason = BLE_ERROR_CHIPOBLE_PROTOCOL_ABORT; |
| break; |
| } |
| HandleConnectionError(connEvent->BtConn, disconReason); |
| } |
| |
| exit: |
| // Unref bt_conn before scheduling DriveBLEState. |
| bt_conn_unref(connEvent->BtConn); |
| |
| ChipLogProgress(DeviceLayer, "Current number of connections: %u/%u", NumConnections(), CONFIG_BT_MAX_CONN); |
| |
| ChipDeviceEvent disconnectEvent; |
| disconnectEvent.Type = DeviceEventType::kCHIPoBLEConnectionClosed; |
| ReturnErrorOnFailure(PlatformMgr().PostEvent(&disconnectEvent)); |
| if (mFlags.Has(Flags::kChipoBleShutDown)) |
| { |
| int ret = bt_disable(); |
| if (ret) |
| { |
| ChipLogError(DeviceLayer, "CHIPoBLE Shutdown faild =%d", ret); |
| } |
| else |
| { |
| mFlags.Clear(Flags::kChipoBleShutDown); |
| } |
| return CHIP_NO_ERROR; |
| } |
| // Force a reconfiguration of advertising in case we switched to non-connectable mode when |
| // the BLE connection was established. |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::HandleTXCharCCCDWrite(const ChipDeviceEvent * event) |
| { |
| const BleCCCWriteEventType * writeEvent = &event->Platform.BleCCCWriteEvent; |
| |
| ChipLogDetail(DeviceLayer, "ConnId: 0x%02x, New CCCD value: 0x%04x", bt_conn_index(writeEvent->BtConn), writeEvent->Value); |
| |
| // If the client has requested to enable indications and if it is not yet subscribed |
| if (writeEvent->Value == BT_GATT_CCC_INDICATE && SetSubscribed(writeEvent->BtConn)) |
| { |
| // Alert the BLE layer that CHIPoBLE "subscribe" has been received and increment the bt_conn reference counter. |
| HandleSubscribeReceived(writeEvent->BtConn, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| |
| ChipLogProgress(DeviceLayer, "CHIPoBLE connection established (ConnId: 0x%02x, GATT MTU: %u)", |
| bt_conn_index(writeEvent->BtConn), GetMTU(writeEvent->BtConn)); |
| |
| // Post a CHIPoBLEConnectionEstablished event to the DeviceLayer and the application. |
| { |
| ChipDeviceEvent conEstEvent; |
| conEstEvent.Type = DeviceEventType::kCHIPoBLEConnectionEstablished; |
| ReturnErrorOnFailure(PlatformMgr().PostEvent(&conEstEvent)); |
| } |
| } |
| else |
| { |
| if (UnsetSubscribed(writeEvent->BtConn)) |
| { |
| HandleUnsubscribeReceived(writeEvent->BtConn, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| } |
| } |
| |
| bt_conn_unref(writeEvent->BtConn); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::HandleRXCharWrite(const ChipDeviceEvent * event) |
| { |
| const BleC1WriteEventType * c1WriteEvent = &event->Platform.BleC1WriteEvent; |
| |
| ChipLogDetail(DeviceLayer, "Write request received for CHIPoBLE RX characteristic (ConnId 0x%02x)", |
| bt_conn_index(c1WriteEvent->BtConn)); |
| |
| HandleWriteReceived(c1WriteEvent->BtConn, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_RX, |
| PacketBufferHandle::Adopt(c1WriteEvent->Data)); |
| bt_conn_unref(c1WriteEvent->BtConn); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::HandleTXCharComplete(const ChipDeviceEvent * event) |
| { |
| const BleC2IndDoneEventType * c2IndDoneEvent = &event->Platform.BleC2IndDoneEvent; |
| |
| ChipLogDetail(DeviceLayer, "Indication for CHIPoBLE TX characteristic done (ConnId 0x%02x, result 0x%02x)", |
| bt_conn_index(c2IndDoneEvent->BtConn), c2IndDoneEvent->Result); |
| |
| // Signal the BLE Layer that the outstanding indication is complete. |
| HandleIndicationConfirmation(c2IndDoneEvent->BtConn, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| bt_conn_unref(c2IndDoneEvent->BtConn); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| CHIP_ERROR BLEManagerImpl::PrepareC3CharData() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| BitFlags<AdditionalDataFields> additionalDataFields; |
| AdditionalDataPayloadGeneratorParams additionalDataPayloadParams; |
| |
| #if CHIP_ENABLE_ROTATING_DEVICE_ID && defined(CHIP_DEVICE_CONFIG_ROTATING_DEVICE_ID_UNIQUE_ID) |
| uint8_t rotatingDeviceIdUniqueId[ConfigurationManager::kRotatingDeviceIDUniqueIDLength] = {}; |
| MutableByteSpan rotatingDeviceIdUniqueIdSpan(rotatingDeviceIdUniqueId); |
| |
| err = DeviceLayer::GetDeviceInstanceInfoProvider()->GetRotatingDeviceIdUniqueId(rotatingDeviceIdUniqueIdSpan); |
| SuccessOrExit(err); |
| err = ConfigurationMgr().GetLifetimeCounter(additionalDataPayloadParams.rotatingDeviceIdLifetimeCounter); |
| SuccessOrExit(err); |
| additionalDataPayloadParams.rotatingDeviceIdUniqueId = rotatingDeviceIdUniqueIdSpan; |
| additionalDataFields.Set(AdditionalDataFields::RotatingDeviceId); |
| #endif /* CHIP_ENABLE_ROTATING_DEVICE_ID && defined(CHIP_DEVICE_CONFIG_ROTATING_DEVICE_ID_UNIQUE_ID) */ |
| |
| err = AdditionalDataPayloadGenerator().generateAdditionalDataPayload(additionalDataPayloadParams, c3CharDataBufferHandle, |
| additionalDataFields); |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Failed to generate TLV encoded Additional Data (%s)", __func__); |
| } |
| |
| return err; |
| } |
| #endif |
| |
| void BLEManagerImpl::HandleBLEAdvertisementIntervalChange(System::Layer * layer, void * param) |
| { |
| BLEMgr().SetAdvertisingMode(BLEAdvertisingMode::kSlowAdvertising); |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising mode changed to slow"); |
| } |
| |
| void BLEManagerImpl::_OnPlatformEvent(const ChipDeviceEvent * event) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| switch (event->Type) |
| { |
| case DeviceEventType::kPlatformZephyrBleConnected: |
| err = HandleGAPConnect(event); |
| break; |
| |
| case DeviceEventType::kPlatformZephyrBleDisconnected: |
| err = HandleGAPDisconnect(event); |
| break; |
| |
| case DeviceEventType::kPlatformZephyrBleCCCWrite: |
| err = HandleTXCharCCCDWrite(event); |
| break; |
| |
| case DeviceEventType::kPlatformZephyrBleC1WriteEvent: |
| err = HandleRXCharWrite(event); |
| break; |
| |
| case DeviceEventType::kPlatformZephyrBleC2IndDoneEvent: |
| err = HandleTXCharComplete(event); |
| break; |
| |
| default: |
| break; |
| } |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Disabling CHIPoBLE service due to error: %" CHIP_ERROR_FORMAT, err.Format()); |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Disabled; |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| } |
| |
| uint16_t BLEManagerImpl::_NumConnections(void) |
| { |
| return mGAPConns; |
| } |
| |
| bool BLEManagerImpl::CloseConnection(BLE_CONNECTION_OBJECT conId) |
| { |
| ChipLogProgress(DeviceLayer, "Closing BLE GATT connection (ConnId %02x)", bt_conn_index((bt_conn *) conId)); |
| return bt_conn_disconnect((bt_conn *) conId, BT_HCI_ERR_REMOTE_USER_TERM_CONN) == 0; |
| } |
| |
| uint16_t BLEManagerImpl::GetMTU(BLE_CONNECTION_OBJECT conId) const |
| { |
| return bt_gatt_get_mtu((bt_conn *) conId); |
| } |
| |
| bool BLEManagerImpl::SubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogError(DeviceLayer, "%s: NOT IMPLEMENTED", __PRETTY_FUNCTION__); |
| return true; |
| } |
| |
| bool BLEManagerImpl::UnsubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogError(DeviceLayer, "%s: NOT IMPLEMENTED", __PRETTY_FUNCTION__); |
| return true; |
| } |
| |
| bool BLEManagerImpl::SendIndication(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle pBuf) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| int status = 0; |
| uint8_t index = bt_conn_index(conId); |
| bt_gatt_indicate_params * params = &mIndicateParams[index]; |
| |
| VerifyOrExit(IsSubscribed(conId) == true, err = CHIP_ERROR_INVALID_ARGUMENT); |
| |
| ChipLogDetail(DeviceLayer, "Sending indication for CHIPoBLE TX characteristic (ConnId %02x, len %u)", index, |
| pBuf->DataLength()); |
| |
| params->uuid = nullptr; |
| params->attr = &sChipoBleAttributes[kCHIPoBLE_CCC_AttributeIndex]; |
| params->func = HandleTXIndicated; |
| params->data = pBuf->Start(); |
| params->len = pBuf->DataLength(); |
| |
| status = bt_gatt_indicate(conId, params); |
| VerifyOrExit(status == 0, err = MapErrorZephyr(status)); |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "BLEManagerImpl::SendIndication() failed: %." CHIP_ERROR_FORMAT, err.Format()); |
| ChipLogError(DeviceLayer, "BLEManagerImpl::SendIndication() failed: %d", status); |
| } |
| |
| return err == CHIP_NO_ERROR; |
| } |
| |
| bool BLEManagerImpl::SendWriteRequest(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle pBuf) |
| { |
| ChipLogError(DeviceLayer, "%s: NOT IMPLEMENTED", __PRETTY_FUNCTION__); |
| return true; |
| } |
| |
| bool BLEManagerImpl::SendReadRequest(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle pBuf) |
| { |
| ChipLogError(DeviceLayer, "%s: NOT IMPLEMENTED", __PRETTY_FUNCTION__); |
| return true; |
| } |
| |
| bool BLEManagerImpl::SendReadResponse(BLE_CONNECTION_OBJECT conId, BLE_READ_REQUEST_CONTEXT requestContext, |
| const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogError(DeviceLayer, "%s: NOT IMPLEMENTED", __PRETTY_FUNCTION__); |
| return true; |
| } |
| |
| void BLEManagerImpl::NotifyChipConnectionClosed(BLE_CONNECTION_OBJECT conId) |
| { |
| CloseConnection(conId); |
| } |
| |
| bool BLEManagerImpl::IsSubscribed(bt_conn * conn) |
| { |
| return mSubscribedConns[bt_conn_index(conn)]; |
| } |
| |
| bool BLEManagerImpl::SetSubscribed(bt_conn * conn) |
| { |
| uint8_t index = bt_conn_index(conn); |
| bool isSubscribed = mSubscribedConns[index]; |
| mSubscribedConns[index] = true; |
| |
| // If we were not subscribed previously, increment the reference counter of the connection. |
| if (!isSubscribed) |
| { |
| bt_conn_ref(conn); |
| } |
| |
| return !isSubscribed; |
| } |
| |
| bool BLEManagerImpl::UnsetSubscribed(bt_conn * conn) |
| { |
| uint8_t index = bt_conn_index(conn); |
| bool isSubscribed = mSubscribedConns[index]; |
| mSubscribedConns[index] = false; |
| |
| // If we were subscribed previously, decrement the reference counter of the connection. |
| if (isSubscribed) |
| { |
| bt_conn_unref(conn); |
| } |
| |
| return isSubscribed; |
| } |
| |
| ssize_t BLEManagerImpl::HandleRXWrite(struct bt_conn * conId, const struct bt_gatt_attr * attr, const void * buf, uint16_t len, |
| uint16_t offset, uint8_t flags) |
| { |
| ChipDeviceEvent event; |
| PacketBufferHandle packetBuf = PacketBufferHandle::NewWithData(buf, len); |
| |
| if (!packetBuf.IsNull()) |
| { |
| // Arrange to post a CHIPoBLERXWriteEvent event to the CHIP queue. |
| event.Type = DeviceEventType::kPlatformZephyrBleC1WriteEvent; |
| event.Platform.BleC1WriteEvent.BtConn = bt_conn_ref(conId); |
| event.Platform.BleC1WriteEvent.Data = std::move(packetBuf).UnsafeRelease(); |
| } |
| |
| // If we failed to allocate a buffer, post a kPlatformZephyrBleOutOfBuffersEvent event. |
| else |
| { |
| event.Type = DeviceEventType::kPlatformZephyrBleOutOfBuffersEvent; |
| } |
| |
| PlatformMgr().PostEventOrDie(&event); |
| |
| return len; |
| } |
| |
| bool BLEManagerImpl::HandleTXCCCWrite(struct bt_conn * conId, const struct bt_gatt_attr * attr, uint16_t value) |
| { |
| ChipDeviceEvent event; |
| |
| if (value != BT_GATT_CCC_INDICATE && value != 0) |
| { |
| return BT_GATT_ERR(BT_ATT_ERR_VALUE_NOT_ALLOWED); |
| } |
| |
| event.Type = DeviceEventType::kPlatformZephyrBleCCCWrite; |
| event.Platform.BleCCCWriteEvent.BtConn = bt_conn_ref(conId); |
| event.Platform.BleCCCWriteEvent.Value = value; |
| |
| PlatformMgr().PostEventOrDie(&event); |
| |
| return sizeof(value); |
| } |
| |
| void BLEManagerImpl::HandleTXIndicated(struct bt_conn * conId, IndicationAttrType, uint8_t err) |
| { |
| ChipDeviceEvent event; |
| |
| event.Type = DeviceEventType::kPlatformZephyrBleC2IndDoneEvent; |
| event.Platform.BleC2IndDoneEvent.BtConn = bt_conn_ref(conId); |
| event.Platform.BleC2IndDoneEvent.Result = err; |
| |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| void BLEManagerImpl::HandleConnect(struct bt_conn * conId, uint8_t err) |
| { |
| ChipDeviceEvent event; |
| |
| PlatformMgr().LockChipStack(); |
| |
| // Don't handle BLE connecting events when it is not related to CHIPoBLE |
| VerifyOrExit(sInstance.mFlags.Has(Flags::kChipoBleGattServiceRegister), ); |
| |
| event.Type = DeviceEventType::kPlatformZephyrBleConnected; |
| event.Platform.BleConnEvent.BtConn = bt_conn_ref(conId); |
| event.Platform.BleConnEvent.HciResult = err; |
| |
| PlatformMgr().PostEventOrDie(&event); |
| |
| exit: |
| PlatformMgr().UnlockChipStack(); |
| } |
| |
| void BLEManagerImpl::HandleDisconnect(struct bt_conn * conId, uint8_t reason) |
| { |
| ChipDeviceEvent event; |
| |
| PlatformMgr().LockChipStack(); |
| |
| // Don't handle BLE disconnecting events when it is not related to CHIPoBLE |
| VerifyOrExit(sInstance.mFlags.Has(Flags::kChipoBleGattServiceRegister), ); |
| |
| event.Type = DeviceEventType::kPlatformZephyrBleDisconnected; |
| event.Platform.BleConnEvent.BtConn = bt_conn_ref(conId); |
| event.Platform.BleConnEvent.HciResult = reason; |
| |
| PlatformMgr().PostEventOrDie(&event); |
| |
| exit: |
| PlatformMgr().UnlockChipStack(); |
| } |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| ssize_t BLEManagerImpl::HandleC3Read(struct bt_conn * conId, const struct bt_gatt_attr * attr, void * buf, uint16_t len, |
| uint16_t offset) |
| { |
| ChipLogDetail(DeviceLayer, "Read request received for CHIPoBLE C3 (ConnId 0x%02x)", bt_conn_index(conId)); |
| |
| if (sInstance.c3CharDataBufferHandle.IsNull()) |
| { |
| return 0; |
| } |
| |
| return bt_gatt_attr_read(conId, attr, buf, len, offset, sInstance.c3CharDataBufferHandle->Start(), |
| sInstance.c3CharDataBufferHandle->DataLength()); |
| } |
| #endif |
| |
| } // namespace Internal |
| } // namespace DeviceLayer |
| } // namespace chip |
| |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE |
