Checking out the Matter code

Checking out all Platforms

To check out the Matter repository with all platforms, run the following command:

git clone --recurse-submodules https://github.com/project-chip/connectedhomeip.git

Checking out `Bouffalo Lab` Platform

Checking out matter top level repo with command below:

git clone --depth=1 https://github.com/project-chip/connectedhomeip.git

Check out necessary submodules

Checkout BL_IOT_SDK for BL602, BL702 and BL702L platform:

./scripts/checkout_submodules.py --shallow --recursive --platform bouffalolab

Checkout bouffalo_sdk for BL61X platform:

./scripts/checkout_submodules.py --shallow --recursive --platform bouffalo_sdk

If you want to checkout Matter Linux example and development tools, please try as follows:

./scripts/checkout_submodules.py --shallow --recursive --platform linux bouffalolab

Or if you want to checkout Matter Darwin example and development tools, please try as follows:

./scripts/checkout_submodules.py --shallow --recursive --platform darwin bouffalolab

Setup build environment

Please refer to section Prerequisites in BUILDING.md to install build software.

Install toolchains for `Bouffalo Lab` SoC

Enter to cloned Matter project in terminal and run the following script
```
./integrations/docker/images/stage-2/chip-build-bouffalolab/setup.sh
```
Script setup.sh requires to select install path, and please execute following command to export BOUFFALOLAB_SDK_ROOT before building.
```
export BOUFFALOLAB_SDK_ROOT="Your install path"
```

Setup Matter build environment

Enter to cloned Matter project in terminal and run the following script
```
source scripts/activate.sh -p bouffalolab
```
Please refer to scripts/bootstrap.sh and scripts/activate.sh for more detail.

Build examples

Build options for `Bouffalo Lab` SoC

Bouffalo Lab Matter platforms currently use different build systems based on the SDK family:

SDK integration	Platforms	Build system	Recommended build entry
`bouffalo_sdk` + Matter	BL61X, such as BL616/BL618	CMake build system from `bouffalo_sdk`, with Matter integrated into the SDK application project	CMake/Makefile in the example directory
`BL_IOT_SDK` + Matter	BL602, BL702/BL702L	Matter ninja build system	`scripts/build/build_examples.py`

For bouffalo_sdk + Matter, the application is built as a bouffalo_sdk CMake project. The example Makefile wraps the SDK CMake flow and is the recommended entry point for BL61X product application development. build_examples.py is kept compatible for these BL61X targets: it dispatches to the same CMake build and then exports artifacts into the standard Matter out/<target> directory.

For BL_IOT_SDK + Matter, the examples use the Matter ninja build system. Use build_examples.py to select the board, application, connectivity, storage, and optional features; the script generates the Matter build configuration and runs the ninja build.

With source scripts/activate.sh -p bouffalolab under terminal, please try the following command to list supported options.

./scripts/build/build_examples.py targets

The output with bouffalolab started likes below:

bouffalolab-{bl602-night-light,bl602dk,bl616cl,bl616dk,bl704ldk,bl706-night-light,bl706dk}-{contact-sensor,light}-{ethernet,thread,thread-ftd,thread-mtd,wifi}-{easyflash,littlefs}[-cdc][-coredump][-memmonitor][-mfd][-rotating_device_id][-rpc][-shell]

supported board options, select one of the following options to build
- -bl602dk
- -bl616dk
- -bl616cl
- -bl704ldk
- -bl706dk
- -bl602-night-light
- -bl706-night-light
supported example options, select one of the following options to build
- -light
- -contact-sensor, availability depends on board/connectivity. BL61X supports Wi-Fi contact sensor builds; BL704L supports Thread MTD low-power contact sensor builds.
connectivity options, select one of the following options to build
- -wifi, specifies to use Wi-Fi for Matter application.
- -ethernet, specifies to use Ethernet for Matter application.
- -thread, specifies to use Thread FTD for Matter application.
- -thread-ftd, specifies to use Thread FTD for Matter application.
- -thread-mtd, specifies to use Thread MTD for Matter application.
storage options, select one of the following options to build
- -littlefs, specifies to use littlefs for flash access.
- -easyflash, specifies to use easyflash for flash access.
  littlefs uses a different format than easyflash and they are not compatible. Please use the -easyflash flag if existing in-field devices were already deployed with easyflash.
  BL61X bouffalo_sdk builds support littlefs. Do not use -easyflash with BL61X build_examples.py targets.
-rotating_device_id, enable rotating device id
-mfd, enable Matter factory data feature, which load factory data from MFD partition
- Please refer to Bouffalo Lab Matter factory data guide or contact to Bouffalo Lab for support.
-shell, enable command line
-rpc, enable Pigweed RPC feature, which will use baudrate 115200 for PRC
-cdc, enable USB CDC feature, only support for BL706, and can't work with Ethernet Board

Bouffalo Lab Matter project uses UART baudrate 2000000 for logging output by default. If you want another baudrate for a BL_IOT_SDK Matter ninja build, please change variable baudrate in BUILD.gn under the example project. For BL61X CMake-based builds, change the UART baudrate through the bouffalo_sdk configuration used by the example.

Build an example

BL61X using CMake (recommended for product development)

The BL61X bouffalo_sdk + Matter build uses the CMake build system through a Makefile wrapper. Product-side application development with bouffalo_sdk + Matter should use this CMake flow because it follows the SDK project layout and configuration model directly.

Activate the build environment:

source scripts/activate.sh -p bouffalolab

Lighting app:

Command	Description
`make -C examples/lighting-app/bouffalolab CONFIG_WIFI=y`	Wi-Fi (default)
`make -C examples/lighting-app/bouffalolab CONFIG_THREAD=y`	Thread / OpenThread
`make -C examples/lighting-app/bouffalolab CONFIG_THREAD=y CONFIG_OT_FTD=0 CONFIG_OT_MTD=1`	Thread MTD
`make -C examples/lighting-app/bouffalolab CONFIG_ETHERNET=y`	Ethernet
`make -C examples/lighting-app/bouffalolab CONFIG_WIFI=y CONFIG_SHELL=y`	Wi-Fi + shell

Contact sensor app (Wi-Fi only):

Command	Description
`make -C examples/contact-sensor-app/bouffalolab`	Default Wi-Fi build

Optional feature flags (both apps):

Flag	Default	Description
`CONFIG_MFD=y/n`	`y`	Enable factory/manufacturing data
`CONFIG_CHIP_ROTATING_DEVICE_ID=y/n`	`n`	Enable rotating device ID
`CONFIG_CHIP_HEAP_MONITOR=y/n`	`n`	Enable heap monitoring
`CONFIG_COREDUMP=y/n`	`n`	Enable SDK `coredump` capture
`CONFIG_SHELL=y/n`	`n`	Enable Matter interactive shell

Thread-specific flags (lighting-app only):

Flag	Default	Description
`CONFIG_OT_FTD=1/0`	`1`	Enable or disable Thread FTD mode
`CONFIG_OT_MTD=1/0`	`0`	Enable or disable Thread MTD mode

Board selection:

Flag	Default	Description
`CHIP=<chip>`	`bl616`	BL61X chip name, for example `bl616` or `bl616cl`
`BOARD=<board>`	`${CHIP}dk`	SDK board name, for example `bl616dk` or `bl616cldk`

Clean and rebuild:

make -C examples/<app>/bouffalolab clean
make -C examples/<app>/bouffalolab CONFIG_WIFI=y

Flash with optional MFD:

make -C examples/<app>/bouffalolab CONFIG_WIFI=y flash MFD_FILE=/path/to/mfd.bin

The CMake build for BL61X is the primary and recommended build method for product application development. build_examples.py is compatible with BL61X and dispatches to the same CMake/Makefile build internally. For the full list of available build options, please refer to the Makefile in the example directory (examples/<app>/bouffalolab/Makefile).

Using build_examples.py

build_examples.py remains supported for Bouffalo Lab platforms. For BL61X bouffalo_sdk + Matter targets, it invokes the same CMake/Makefile build and then places generated artifacts and flashing scripts under the standard Matter output directory, out/<target>. For BL_IOT_SDK + Matter targets, build_examples.py drives the Matter ninja build system.

Taking lighting app with littlefs supported as example:

BL602DK with Wi-Fi

./scripts/build/build_examples.py --target bouffalolab-bl602dk-light-wifi-littlefs build

BL616DK with Wi-Fi
```
./scripts/build/build_examples.py --target bouffalolab-bl616dk-light-wifi-littlefs build
```
Recommended product-development build: make -C examples/lighting-app/bouffalolab CONFIG_WIFI=y
BL616 with Thread
```
./scripts/build/build_examples.py --target bouffalolab-bl616dk-light-thread-littlefs build
```
Recommended product-development build: make -C examples/lighting-app/bouffalolab CONFIG_THREAD=y
BL616 with Ethernet
```
./scripts/build/build_examples.py --target bouffalolab-bl616dk-light-ethernet-littlefs build
```
Recommended product-development build: make -C examples/lighting-app/bouffalolab CONFIG_ETHERNET=y
BL616 contact sensor with Wi-Fi
```
./scripts/build/build_examples.py --target bouffalolab-bl616dk-contact-sensor-wifi-littlefs build
```
Recommended product-development build: make -C examples/contact-sensor-app/bouffalolab

BL704L with Thread

./scripts/build/build_examples.py --target bouffalolab-bl704ldk-light-thread-littlefs build

BL706 with Thread

./scripts/build/build_examples.py --target bouffalolab-bl706dk-light-thread-littlefs build

BL706 with Ethernet

./scripts/build/build_examples.py --target bouffalolab-bl706dk-light-ethernet-littlefs build

BL706 with Wi-Fi
```
./scripts/build/build_examples.py --target bouffalolab-bl706dk-light-wifi-littlefs build
```
This BL706 + BL602 Wi-Fi solution: BL602 runs WLAN part and BL706 runs TCP/IP stack which uses SPI for communication between these two parts.

Partition table

Bouffalo Lab provides reference partition table files for each platform under examples/platform/bouffalolab/<platforms>/flash_config.

Final products may have different flash layout requirements, such as:

Firmware size requirements;
Over-the-air upgrade support with or without compressed image;
Supports more Matter fabrics;
Custom application partitions;
And other specific needs.

Developers should design the flash layout accordingly for their final products. For guidance, refer to the ‌ flash tool documentation or contact Bouffalo Lab for support.

‌**Note:**‌ The partition table is typically ‌not editable over-the-air. Ensure sufficient margin in the initial design to accommodate future requirements.

Download image

Take build target bouffalolab-bl602dk-light-wifi-littlefs as example to introduce image downloading steps.

After example compiled, a python script chip-bl602-lighting-example.flash.py will be generated out under ./out/bouffalolab-bl602dk-light-wifi-littlefs/ and is used to download image to Bouffalo Lab SoC.

And download image as following steps:

Connect the board to your build machine with USB cable
Put the SoC to the download mode:
- Press and hold the BOOT button.
- Click the RESET or EN button.
- Release the BOOT button.
Type following command for image download. Please set serial port accordingly, here we use /dev/ttyACM0 as a serial port example.
```
./out/bouffalolab-bl602dk-light-wifi-littlefs/chip-bl602-lighting-example.flash.py --port /dev/ttyACM0
```
If needs to download image with the whole flash erased, please append --erase option.
```
./out/bouffalolab-bl602dk-light-wifi-littlefs/chip-bl602-lighting-example.flash.py --port /dev/ttyACM0 --erase
```
Note, better to append --erase option to download image for BL602 develop board at first time.
Then, open serial console /dev/ttyACM0 with baudrate 2000000. The log will output if the RESET or EN button clicked.

Test Commission and Control with chip-tool

Please follow chip_tool_guide to build and guide use chip-tool for test.

Prerequisite for Thread Protocol

Thread wireless protocol could runs on BL704L/BL706/BL616, which needs a Thread border router to connect Thread network to Wi-Fi/Ethernet network. Please follow this guide to setup a raspberry Pi border router.

After Thread border router setup, please type following command on Thread border router to get Thread network credential.

sudo ot-ctl dataset active -x

Commissioning over BLE

Reset the board or factory reset the board
Enter build out folder of chip-tool and running the following command to do BLE commission
- Wi-Fi
```
./out/linux-x64-chip-tool/chip-tool pairing ble-wifi <device_node_id> <wifi_ssid> <wifi_passwd> 20202021 3840
```
- Thread
```
./out/linux-x64-chip-tool/chip-tool pairing ble-thread <device_node_id> hex:<thread_operational_dataset> 20202021 3840
```
- Ethernet ./out/linux-x64-chip-tool/chip-tool pairing onnetwork <device_node_id> 20202021
  <device_node_id>, which is node ID assigned to device with chip-tool;
  <wifi_ssid>, Wi-Fi network SSID;
  <wifi_passwd>, Wi-FI network password;
  <thread_operational_dataset>, Thread network credential which running sudo ot-ctl dataset active -x command on border router to get.

Read a cluster attribute

./out/linux-x64-chip-tool/chip-tool basicinformation read vendor-name <device_node_id> 0