# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name: Door Lock Cluster Lock/Unlock tests

config:
    nodeId: 0x12344321
    cluster: "Door Lock"
    endpoint: 1
    timeout: 25

tests:
    - label: "Wait for the commissioned device to be retrieved"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "Try to unlock the door without PIN"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000

    - label: "Verify that lock state attribute value is set to Unlocked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 2

    - label: "Try to lock the door without a PIN"
      command: "LockDoor"
      timedInteractionTimeoutMs: 10000

    - label: "Verify that lock state attribute value is set to Locked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 1

    - label: "Try to unbolt the door without PIN"
      command: "UnboltDoor"
      timedInteractionTimeoutMs: 10000

    - label: "Verify that lock state attribute value is set to Unlocked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 2

    - label: "Try to lock the door without a PIN"
      command: "LockDoor"
      timedInteractionTimeoutMs: 10000

    - label: "Verify that lock state attribute value is set to Locked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 1

    - label: "Create new lock/unlock user"
      command: "SetUser"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "OperationType"
                value: 0
              - name: "UserIndex"
                value: 1
              - name: "UserName"
                value: "xxx"
              - name: "UserUniqueID"
                value: 6452
              - name: "UserStatus"
                value: 1
              - name: "UserType"
                value: 0
              - name: "CredentialRule"
                value: 0

    - label:
          "Create new PIN credential and associate it with lock/unlock user,
          with userIndex != credentialIndex"
      command: "SetCredential"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "OperationType"
                value: 0
              - name: "Credential"
                value: { CredentialType: 1, CredentialIndex: 2 }
              - name: "CredentialData"
                value: "123456"
              - name: "UserIndex"
                value: 1
              - name: "UserStatus"
                value: null
              - name: "UserType"
                value: null
      response:
          values:
              - name: "Status"
                value: 0x00
              - name: "UserIndex"
                value: null
              - name: "NextCredentialIndex"
                value: 3

    - label:
          "Set the WrongCodeEntryLimit to big value so that we can test
          incorrect PIN entry"
      command: "writeAttribute"
      attribute: "WrongCodeEntryLimit"
      arguments:
          value: 20

    - label: "Try to unlock the door with invalid PIN"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "000000"
      response:
          error: FAILURE

    - label: "Verify that lock state attribute value is set to Locked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 1

    - label: "Try to unlock the door with valid PIN"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"

    - label: "Read the LockOperation event list"
      command: "readEvent"
      event: "LockOperation"
      response:
          - values:
                - value:
                      {
                          "LockOperationType": 4,
                          "OperationSource": 7,
                          "UserIndex": null,
                          "Credentials": null,
                      }
          - values:
                - value:
                      {
                          "LockOperationType": 1,
                          "OperationSource": 7,
                          "UserIndex": null,
                          "Credentials": null,
                      }
          - values:
                - value:
                      {
                          "LockOperationType": 0,
                          "OperationSource": 7,
                          "UserIndex": null,
                          "Credentials": null,
                      }
          - values:
                - value:
                      {
                          "LockOperationType": 1,
                          "OperationSource": 7,
                          "UserIndex": null,
                          "Credentials": null,
                      }
          - values:
                - value:
                      {
                          "LockOperationType": 0,
                          "OperationSource": 7,
                          "UserIndex": null,
                          "Credentials": null,
                      }
          - values:
                - value:
                      {
                          "LockOperationType": 4,
                          "OperationSource": 7,
                          "UserIndex": 1,
                          "Credentials":
                              [{ "CredentialType": 1, "CredentialIndex": 2 }],
                      }
          - values:
                - value:
                      {
                          "LockOperationType": 1,
                          "OperationSource": 7,
                          "UserIndex": 1,
                          "Credentials":
                              [{ "CredentialType": 1, "CredentialIndex": 2 }],
                      }

    - label: "Verify that lock state attribute value is set to Unlocked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 2

    - label: "Try to lock the door with invalid PIN"
      command: "LockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "000000"
      response:
          error: FAILURE

    - label:
          "Read the LockOperationError event list; verify null UserIndex and
          Credentials"
      command: "readEvent"
      event: "LockOperationError"
      response:
          - values:
                - value:
                      {
                          "LockOperationType": 1,
                          "OperationSource": 7,
                          "OperationError": 1,
                          "UserIndex": null,
                          "Credentials": null,
                      }
          - values:
                - value:
                      {
                          "LockOperationType": 0,
                          "OperationSource": 7,
                          "OperationError": 1,
                          "UserIndex": null,
                          "Credentials": null,
                      }

    - label: "Verify that lock state attribute value is set to Unlocked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 2

    - label: "Try to lock the door with valid PIN"
      command: "LockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"

    - label: "Verify that lock state attribute value is set to Locked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 1

    - label: "Set OperatingMode to NoRemoteLockUnlock"
      command: "writeAttribute"
      attribute: "OperatingMode"
      arguments:
          value: 3

    - label: "Try to unlock the door when OperatingMode is NoRemoteLockUnlock"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      response:
          error: FAILURE

    - label: "Set OperatingMode to Normal"
      command: "writeAttribute"
      attribute: "OperatingMode"
      arguments:
          value: 0

    # Test resetting wrong code entry retry attempts
    # Set the retry limit to 3. Try to unlock with incorrect PIN 2 times followed by a third time
    # with correct PIN code. The retry attempts should be reset to 0. Try to unock with incorrect
    # PIN 2 times followed by a third time with correct PIN code. We should be able to unlock since
    # the count has been reset and we are not in lockout.

    - label: "Set the WrongCodeEntryLimit to small value so we can test lockout"
      command: "writeAttribute"
      attribute: "WrongCodeEntryLimit"
      arguments:
          value: 3

    - label: "Try to unlock the door with invalid PIN for the first time"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "000000"
      response:
          error: FAILURE

    - label: "Try to unlock the door with invalid PIN for the second time"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "000000"
      response:
          error: FAILURE

    - label: "Try to unlock the door with valid PIN for the third time"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"

    - label: "Verify that lock state attribute value is set to Unlocked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 2

    - label: "Lock the door back prior to next tests"
      command: "LockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"

    - label: "Verify that lock state attribute value is set to Locked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 1

    - label: "Try to unlock the door with invalid PIN for the first time"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "000000"
      response:
          error: FAILURE

    - label: "Try to unlock the door with invalid PIN for the second time"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "000000"
      response:
          error: FAILURE

    - label: "Try to unlock the door with valid PIN for the third time"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"

    - label: "Verify that lock state attribute value is set to Unlocked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 2

    - label: "Lock the door back prior to next tests"
      command: "LockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"

    - label: "Verify that lock state attribute value is set to Locked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 1

    - label: "Read the lockout timeout"
      command: "readAttribute"
      attribute: "UserCodeTemporaryDisableTime"
      response:
          value: 10

    - label: "Try to unlock the door with invalid PIN for the first time"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "000000"
      response:
          error: FAILURE

    - label: "Try to unlock the door with invalid PIN for the second time"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "000000"
      response:
          error: FAILURE

    - label: "Try to unlock the door with invalid PIN for the third time"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "000000"
      response:
          error: FAILURE

    - label:
          "Try to unlock the door with valid PIN and make sure it fails due to
          lockout"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"
      response:
          error: FAILURE

    - label:
          "Read the DoorLockAlarm event list; verify WrongEntryCodeLimit alarm
          has been generated"
      command: "readEvent"
      event: "DoorLockAlarm"
      response:
          value: { "AlarmCode": 4 }

    - label: "Wait for the lockout to end"
      cluster: "DelayCommands"
      command: "WaitForMs"
      # We know the lockout value, but it's in seconds. Previous read from UserCodeTemporaryDisableTime verified that
      # the lockout time is 10 seconds, so we can just put 10000ms here.
      arguments:
          values:
              - name: "ms"
                value: 10000

    - label: "Try to unlock the door with valid PIN and make sure it succeeds"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"

    - label: "Verify that lock state attribute value is set to Unlocked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 2

    - label: "Lock the door back prior to next tests"
      command: "LockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"

    - label: "Create a disabled user and credential"
      command: "SetCredential"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "OperationType"
                value: 0
              - name: "Credential"
                value: { CredentialType: 1, CredentialIndex: 3 }
              - name: "CredentialData"
                value: "654321"
              - name: "UserIndex"
                value: null
              - name: "UserStatus"
                value: 3
              - name: "UserType"
                value: null
      response:
          values:
              - name: "Status"
                value: 0x00
              - name: "UserIndex"
                value: 2
              - name: "NextCredentialIndex"
                value: 4

    - label: "Try to unlock the door with disabled user PIN"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "654321"
      response:
          error: FAILURE

    - label: "Verify that lock state attribute value is set to Locked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 1

    - label: "Unlock the door with enabled user PIN"
      command: "UnlockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"

    - label: "Verify that lock state attribute value is set to Unlocked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 2

    - label: "Try to lock the door with disabled user PIN"
      command: "LockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "654321"
      response:
          error: FAILURE

    - label: "Verify that lock state attribute value stays Unlocked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 2

    - label: "Lock the door with enabled user PIN"
      command: "LockDoor"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "PINCode"
                value: "123456"

    - label: "Verify that lock state attribute value is set to Locked"
      command: "readAttribute"
      attribute: "LockState"
      response:
          value: 1

    # Clean-up

    - label: "Clean all the users and credentials"
      command: "ClearUser"
      timedInteractionTimeoutMs: 10000
      arguments:
          values:
              - name: "UserIndex"
                value: 0xFFFE