# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    120.2.3. [TC-BIND-2.3] Binding Cluster Attributes-TH1 enables DUT to handle
    its Group settings [DUT-Controller]

PICS:
    - BIND.C
    - GRPKEY.C

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Note"
      verification: |
          Chip-tool command used below are an example to verify the DUT as controller test cases. For certification test, we expect DUT should have a capability or way to run the equivalent command.

          Take 2 raspi, 1 as Lighting app and another one as chip-tool. and use [ nRF52840-DK ]Thread device as  light-switch-app.
      disabled: true

    - label: "Pre-Conditions"
      verification: |
          TH1 enables DUT to handle group communication
          TH2 supports On/Off server on Endpoint 1
          TH2 supports Groups server on Endpoint 1
          TH2 should have an ACL entry with the AuthMode as Group by TH1
          DUT supports On/Off client
      disabled: true

    - label: "Step 1: Factory Reset DUT"
      verification: |
          Vendor specific action, for chip-tool run
          rm -rf /tmp/chip*
      disabled: true

    - label: "Step 2: Commission DUT to TH1s fabric"
      verification: |
          Advertise the [ light-switch-app ] on [ nRF52840-DK ]Thread device  and  pair the TH using below cmmd.

          ./chip-tool pairing ble-thread 74 hex:0e080000000000010000000300001035060004001fffe0020811131111222222220708fd289db171f70e0a051000112233449566778899aabbccddeeff030f4f70656e54687265616444656d6f6a01021234041054cf5959c56366f2a69129148737edc60c0402a0f7f8 20202021 3840
      disabled: true

    - label: "Step 3: TH1 enables DUT as Controller"
      verification: |

      disabled: true

    - label: "Step 4: Commission TH2 to TH1s fabric (Node ID = 2)"
      verification: |
          Advertise the [Lighting-app] on Raspi and  pair the TH using below cmmd.

          ./chip-tool pairing onnetwork 2 20202021

          On TH1(Chip-tool), Verify the success response

          [1659104612.592373][62366:62371] CHIP:DMG:         SuppressResponse = true,
          [1659104612.592399][62366:62371] CHIP:DMG:         InteractionModelRevision = 1
          [1659104612.592432][62366:62371] CHIP:DMG: }
          [1659104612.593187][62366:62371] CHIP:CTL: Successfully finished commissioning step 'ReadCommissioningInfo'
      disabled: true

    - label:
          "Step 5: TH1 generates fabric-unique GroupID, GroupName, random key,
          EpochKey0 and GroupKeySetID."
      verification: |
          As Admin generates it is not required to verify
      disabled: true

    - label:
          "Step 6: TH1 sends KeySetWrite command to GroupKeyManagement cluster
          to TH2 on Endpoint 0."
      verification: |
          Run this command for [ nRF52840-DK ]Thread device in chip-tool:

          ./chip-tool groupkeymanagement key-set-write '{"groupKeySetID": 42,
          "groupKeySecurityPolicy": 0, "epochKey0":
          "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf", "epochStartTime0": 2220000,"epochKey1":
          "d1d1d2d3d4d5d6d7d8d9dadbdcdddedf", "epochStartTime1": 2220001,"epochKey2":
          "d2d1d2d3d4d5d6d7d8d9dadbdcdddedf", "epochStartTime2": 2220002 }' 74 0

          On TH1(Chip-tool), Verify the success response for KeySetWrite

          [1657719041.075123][4541:4546] CHIP:DMG: ICR moving to [ResponseRe]
          [1657719041.075174][4541:4546] CHIP:DMG: InvokeResponseMessage =
          [1657719041.075200][4541:4546] CHIP:DMG: {
          [1657719041.075224][4541:4546] CHIP:DMG:         suppressResponse = false,
          [1657719041.075255][4541:4546] CHIP:DMG:         InvokeResponseIBs =
          [1657719041.075287][4541:4546] CHIP:DMG:         [
          [1657719041.075311][4541:4546] CHIP:DMG:                 InvokeResponseIB =
          [1657719041.075347][4541:4546] CHIP:DMG:                 {
          [1657719041.075376][4541:4546] CHIP:DMG:                         CommandStatusIB =
          [1657719041.075408][4541:4546] CHIP:DMG:                         {
          [1657719041.075439][4541:4546] CHIP:DMG:                                 CommandPathIB =
          [1657719041.075473][4541:4546] CHIP:DMG:                                 {
          [1657719041.075507][4541:4546] CHIP:DMG:                                         EndpointId = 0x0,
          [1657719041.075542][4541:4546] CHIP:DMG:                                         ClusterId = 0x3f,
          [1657719041.075577][4541:4546] CHIP:DMG:                                         CommandId = 0x0,
          [1657719041.075609][4541:4546] CHIP:DMG:                                 },
          [1657719041.075646][4541:4546] CHIP:DMG:
          [1657719041.075676][4541:4546] CHIP:DMG:                                 StatusIB =
          [1657719041.075709][4541:4546] CHIP:DMG:                                 {
          [1657719041.075743][4541:4546] CHIP:DMG:                                         status = 0x00 (SUCCESS),
          [1657719041.075775][4541:4546] CHIP:DMG:                                 },
          [1657719041.075809][4541:4546] CHIP:DMG:
          [1657719041.075840][4541:4546] CHIP:DMG:                         },
          [1657719041.075874][4541:4546] CHIP:DMG:
          [1657719041.075902][4541:4546] CHIP:DMG:                 },
          [1657719041.075935][4541:4546] CHIP:DMG:
          [1657719041.075959][4541:4546] CHIP:DMG:         ],
          [1657719041.075988][4541:4546] CHIP:DMG:
          [1657719041.076012][4541:4546] CHIP:DMG:         InteractionModelRevision = 1

          Run this command for lighting app in chip-tool:

          ./chip-tool groupkeymanagement key-set-write '{"groupKeySetID": 42, "groupKeySecurityPolicy": 0, "epochKey0": "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf", "epochStartTime0": 2220000,"epochKey1": "d1d1d2d3d4d5d6d7d8d9dadbdcdddedf", "epochStartTime1": 2220001,"epochKey2": "d2d1d2d3d4d5d6d7d8d9dadbdcdddedf", "epochStartTime2": 2220002 }' 2 0

          On TH1, Verify the success response for KeySetWrite

          [1657719041.075743][4541:4546] CHIP:DMG:                                         status = 0x00 (SUCCESS),
      disabled: true

    - label:
          "Step 7: TH1 binds GroupId with GroupKeySetID in the GroupKeyMap
          attribute list on GroupKeyManagement cluster to TH2 on Endpoint 0"
      verification: |
          Run this command for [ nRF52840-DK ]Thread device in chip-tool:

          ./chip-tool groupkeymanagement write group-key-map '[{"groupId": 1, "groupKeySetID": 42, "fabricIndex": 1}]' 74 0

          On TH1(Chip-tool), Verify the success response for GroupKeySetID

          [1657719130.464175][4557:4562] CHIP:DMG:                         StatusIB =
          [1657719130.464214][4557:4562] CHIP:DMG:                         {
          [1657719130.464256][4557:4562] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1657719130.464298][4557:4562] CHIP:DMG:                         },
          [1657719130.464342][4557:4562] CHIP:DMG:

          Run this command for lighting app in chip-tool:
          ./chip-tool groupkeymanagement write group-key-map '[{"groupId": 1, "groupKeySetID": 42, "fabricIndex": 1}]' 2 0

          On TH1(Chip-tool), Verify the success response for GroupKeySetID

          [1657719130.464175][4557:4562] CHIP:DMG:                         StatusIB =
          [1657719130.464214][4557:4562] CHIP:DMG:                         {
          [1657719130.464256][4557:4562] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1657719130.464298][4557:4562] CHIP:DMG:                         },
          [1657719130.464342][4557:4562] CHIP:DMG:
      disabled: true

    - label:
          "Step 8: TH1 sends AddGroup( Group Name and Group-ID) Command to TH2
          on Endpoint 1."
      verification: |
          Run this command for [ nRF52840-DK ]Thread device in chip-tool:

          ./chip-tool groups add-group 0x0001 grp1 74 1

          On TH1(Chip-tool), Verify the success response for AddGroup

          [1657719097.788236][4548:4554] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0004 Command 0x0000_0000
          [1657719097.788325][4548:4554] CHIP:TOO:   AddGroupResponse: {
          [1657719097.788366][4548:4554] CHIP:TOO:     status: 0
          [1657719097.788393][4548:4554] CHIP:TOO:     groupId: 1
          [1657719097.788418][4548:4554] CHIP:TOO:    }


          Run this command for lighting app in chip-tool:

          ./chip-tool groups add-group 0x0001 grp1 2 1

          On TH1(Chip-tool), Verify the success response for AddGroup

          [1657719097.788236][4548:4554] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0004 Command 0x0000_0000
          [1657719097.788325][4548:4554] CHIP:TOO:   AddGroupResponse: {
          [1657719097.788366][4548:4554] CHIP:TOO:     status: 0
          [1657719097.788393][4548:4554] CHIP:TOO:     groupId: 1
          [1657719097.788418][4548:4554] CHIP:TOO:    }


          Run this commands for both Ligh-switch-app and Lighting-app:

          ./chip-tool groupsettings add-group grp1 0x0001

          ./chip-tool groupsettings add-keysets 0x0042 0 0x000000000021dfe0 hex:d0d1d2d3d4d5d6d7d8d9dadbdcdddedf

          ./chip-tool groupsettings bind-keyset 0x0001 0x0042

          ./chip-tool groupsettings show-groups

            +-------------------------------------------------------------------------------------+
            | Available Groups :                                                                  |
            +-------------------------------------------------------------------------------------+
            | Group Id   |  KeySet Id     |   Group Name                                          |
            | 0x101           0x1a1            Group #1                                           |
            | 0x102           0x1a2            Group #2                                           |
            | 0x1               0x42              grp1                                                   |
            +-------------------------------------------------------------------------------------+"
      disabled: true

    - label:
          "Step 9: TH1 writes Binding entry into DUT with Entry 1: Group = The
          Group ID in the AddGroup command sent from TH1 to TH2"
      verification: |
          Before write the binding entries run the ACL Commands:

          Run this command for [ nRF52840-DK ]Thread device in chip-tool:

           ./chip-tool accesscontrol write acl '[{"fabricIndex": 1, "privilege": 5, "authMode": 2, "subjects": [112233], "targets": null },{"fabricIndex": 1, "privilege": 4, "authMode": 3, "subjects": [1], "targets": null }]' 74 0

          On TH1(Chip-tool), Verify the success response for Acl:

          [1659075680.943991][2687:2692] CHIP:DMG:                         StatusIB =
          [1659075680.944052][2687:2692] CHIP:DMG:                         {
          [1659075680.944116][2687:2692] CHIP:DMG:                                 status = 0x00 (SUCCESS),

          Run this command for lighting app in chip-tool:

          ./chip-tool accesscontrol write acl '[{"fabricIndex": 1, "privilege": 5, "authMode": 2, "subjects": [112233], "targets": null },{"fabricIndex": 1, "privilege": 4, "authMode": 3, "subjects": [1], "targets": null }]' 2 0

          On TH1(Chip-tool), Verify the success response for Acl:

          [1659075680.943991][2687:2692] CHIP:DMG:                         StatusIB =
          [1659075680.944052][2687:2692] CHIP:DMG:                         {
          [1659075680.944116][2687:2692] CHIP:DMG:                                 status = 0x00 (SUCCESS),


          Run this command for [ nRF52840-DK ]Thread device in chip-tool:

          ./chip-tool binding write binding '[{"group" : "0x0001"}]' 74 1

          On TH1(Chip-tool), Verify the success response for binding entry

          [1657719251.763323][4597:4602] CHIP:DMG:                         StatusIB =
          [1657719251.763360][4597:4602] CHIP:DMG:                         {
          [1657719251.763402][4597:4602] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1657719251.763440][4597:4602] CHIP:DMG:                         },
      disabled: true

    - label: "Step 10: TH1 sets up group settings on DUT"
      verification: |

      disabled: true

    - label:
          "Step 11a: DUT is triggered to send Multicast message On command to
          its binding entries"
      PICS: OO.C.C01.Tx
      verification: |
          Press button no.2 on nrf52840 DK thread board
      disabled: true

    - label: "Step 11b: TH1 reads OnOff attribute from TH2 (Endpoint 1)"
      PICS: OO.C.C01.Tx
      verification: |
          Run this command for lighting app in chip-tool:

          ./chip-tool onoff read on-off 2 1

          On TH1(Chip-tool), Verify the onoff value is set to ON(TRUE)

          [1657719363.799344][4615:4620] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0006 Attribute 0x0000_0000 DataVersion: 3526720174
          [1657719363.799380][4615:4620] CHIP:TOO:   OnOff: TRUE
      disabled: true

    - label: "Step 12: TH1 removes all the binding entries from DUT"
      verification: |
          Run this command for [ nRF52840-DK ]Thread device in chip-tool:

          ./chip-tool binding write binding '[]' 74 1

          On TH1(Chip-tool), Verify the success response for removing binding entry

          [1659362827.431927][2469:2475] CHIP:DMG:                         StatusIB =
          [1659362827.431996][2469:2475] CHIP:DMG:                         {
          [1659362827.432070][2469:2475] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1659362827.432154][2469:2475] CHIP:DMG:                         },
      disabled: true

    - label:
          "Step 13a: DUT is triggered to send Multicast message off command to
          its binding entries"
      PICS: OO.C.C00.Tx
      verification: |
          Press button no.2 on nrf52840 DK thread board
      disabled: true

    - label: "Step 13b: TH1 reads OnOff attribute from TH2 (Endpoint 1)"
      PICS: OO.C.C01.Tx
      verification: |
          Run this command for lighting app in chip-tool:

          ./chip-tool onoff read on-off 2 1

          On TH1(Chip-tool), Verify the onoff value is set to ON(TRUE)

          [1657719448.858149][4636:4641] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0006 Attribute 0x0000_0000 DataVersion: 3526720174
          [1657719448.858183][4636:4641] CHIP:TOO:   OnOff: TRUE
      disabled: true