# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name:
    24.1.9. [TC-CADMIN-1.9] Device exit commissioning mode after 20 failed
    commission attempts [ECM] [DUT - Commissionee]

PICS:
    - CADMIN.S

config:
    nodeId: 0x12344321
    timeout: 700
    nodeIdForDuplicateCommissioning:
        type: node_id
        defaultValue: 0x11
    nodeId2:
        type: node_id
        defaultValue: 0xCAFE
    nodeId3:
        type: node_id
        defaultValue: 0xC00FEE
    endpoint: 0
    waitAfterCommissioning:
        type: int16u
        defaultValue: 5000
    discriminator:
        type: int16u
        defaultValue: 3840
    correctPayload:
        type: char_string
        defaultValue: "MT:-24J0AFN00KA0648G00"
    incorrectSetupCodePayload:
        type: char_string
        defaultValue: "MT:-24J0AFN00I.0648G00"
    PakeVerifier:
        type: octet_string
        defaultValue: "hex:b96170aae803346884724fe9a3b287c30330c2a660375d17bb205a8cf1aecb350457f8ab79ee253ab6a8e46bb09e543ae422736de501e3db37d441fe344920d09548e4c18240630c4ff4913c53513839b7c07fcc0627a1b8573a149fcd1fa466cf"
    PIXIT.CADMIN.CwDuration:
        type: int16u
        defaultValue: 900

tests:
    - label: "Precondition: Reset Devices to factory defaults"
      PICS: PICS_SDK_CI_ONLY
      cluster: "SystemCommands"
      command: "FactoryReset"

    - label: "Precondition: Reset Devices to factory defaults"
      verification: |
          Reset Devices to factory defaults
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_SKIP_SAMPLE_APP
      arguments:
          values:
              - name: "message"
                value: "Factory Reset the DUT and enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 1a: TH_CR1 starts a commissioning process with DUT_CE"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId
              - name: "payload"
                value: correctPayload

    - label: "Step 1b: TH_CR1 commissioned with DUT_CE"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label:
          "Step 2: TH_CR1 opens a commissioning window on DUT_CE using a
          commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM"
      cluster: "Administrator Commissioning"
      command: "OpenCommissioningWindow"
      timedInteractionTimeoutMs: 10000
      PICS: CADMIN.S.C00.Rsp && PICS_SDK_CI_ONLY
      arguments:
          values:
              - name: "CommissioningTimeout"
                value: PIXIT.CADMIN.CwDuration
              - name: "PAKEPasscodeVerifier"
                value: PakeVerifier
              - name: "Discriminator"
                value: discriminator
              - name: "Iterations"
                value: 1000
              - name: "Salt"
                value: "SPAKE2P Key Salt"

    - label: "Waiting after opening commissioning window"
      PICS: CADMIN.S.C00.Rsp && PICS_SDK_CI_ONLY
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: waitAfterCommissioning

    #Issue https://github.com/project-chip/connectedhomeip/issues/26127
    - label:
          "Step 2: TH_CR1 opens a commissioning window on DUT_CE using a
          commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM"
      verification: |
          On TH_CR1 send the below command

          ./chip-tool pairing open-commissioning-window 1 1 PIXIT.CADMIN.CwDuration 1000 3841

          Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log:

          [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000
          [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window
          [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523

          Verify the Manual pairing code on the TH_CR1(chip-tool) Log:

          [1635864513.699433][3850:3855] CHIP:DMG: ICR moving to [CommandSen]
          [1635864513.699489][3850:3855] CHIP:CTL: Manual pairing code: [36177160937]
          [1635864513.699566][3850:3855] CHIP:CTL: SetupQRCode: [MT:00000CQM00YZN476420]
          [1635864513.699636][3850:3855] CHIP:EM: Sending Standalone Ack for MessageCounter:2599714227 on exchange 60688i
          [1635864513.699685][3850:3855] CHIP:IN: Prepared plaintext message 0xffff8a7cd960 to 0x0000000000000000 of type
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 3: DNS-SD records shows DUT_CE advertising. Verify that the
          DNS-SD advertisement shows CM=2"
      PICS: CADMIN.S.C00.Rsp
      cluster: "DiscoveryCommands"
      command: "FindCommissionable"
      response:
          values:
              - name: "commissioningMode"
                value: 2

    - label:
          "Step 4.1: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.2: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.3: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.4: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.5: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.6: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.7: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.8: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.9: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.10: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.11: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.12: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.13: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.14: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.15: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.16: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.17: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.18: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.19: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    - label:
          "Step 4.20: TH_CR2 starts a commissioning process with DUT_CE using
          Invalid setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: incorrectSetupCodePayload
              - name: discoverOnce
                value: true
      response:
          error: FAILURE

    # This step must match the verification step above where we checked `payload`
    - label:
          "Step 5: TH_CR2 starts a commissioning process with DUT_CE using valid
          setup code"
      identity: "beta"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S && PICS_SDK_CI_ONLY
      arguments:
          values:
              - name: "nodeId"
                value: nodeId2
              - name: "payload"
                value: correctPayload
      response:
          error: FAILURE

    #Issue https://github.com/project-chip/connectedhomeip/issues/26127
    - label: "Step 5: TH_CR2 starts a commissioning process with DUT_CE"
      verification: |
          On TH_CR2 send the below command  (with correct passcode)

          ./chip-tool pairing code 0xCAFE 36177160937  --commissioner-name beta

          Verify the following error on 21st attempt using correct passcode in TH_CR2(chip-tool)

          [1665484807.015876][5399:5399] CHIP:DL: renamed tmp file to file (/tmp/chip_counters.ini)
          [1665484807.016042][5399:5399] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0)
          [1665484807.016108][5399:5399] CHIP:DL: Inet Layer shutdown
          [1665484807.016163][5399:5399] CHIP:DL: BLE Layer shutdown
          [1665484807.016215][5399:5399] CHIP:DL: System Layer shutdown
          [1665484807.016460][5399:5399] CHIP:TOO: Run command failure: ../../commands/pairing/PairingCommand.cpp:164: CHIP Error 0x00000003: Incorrect state
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 6: TH_CR3 starts a commissioning process with DUT_CE"
      identity: "gamma"
      cluster: "CommissionerCommands"
      command: "PairWithCode"
      PICS: CADMIN.S && PICS_SDK_CI_ONLY
      arguments:
          values:
              - name: "nodeId"
                value: nodeId3
              - name: "payload"
                value: correctPayload
      response:
          error: FAILURE

    #Issue https://github.com/project-chip/connectedhomeip/issues/26127
    - label: "Step 6: TH_CR2 starts a commissioning process with DUT_CE"
      verification: |
          On TH_CR3 send the below command  (with correct passcode)

          ./chip-tool pairing code 0xC00FEE 36177160938  (With correct passcode)  --commissioner-name gamma

          Verify the following error on  correct passcode in TH_CR3(chip-tool)
          [1665484807.015876][5399:5399] CHIP:DL: renamed tmp file to file (/tmp/chip_counters.ini)
          [1665484807.016042][5399:5399] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0)
          [1665484807.016108][5399:5399] CHIP:DL: Inet Layer shutdown
          [1665484807.016163][5399:5399] CHIP:DL: BLE Layer shutdown
          [1665484807.016215][5399:5399] CHIP:DL: System Layer shutdown
          [1665484807.016460][5399:5399] CHIP:TOO: Run command failure: ../../commands/pairing/PairingCommand.cpp:164: CHIP Error 0x00000003: Incorrect state
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"