# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name:
    12.4.9. [TC-CNET-4.11] [WiFi] Verification for ConnectNetwork Command
    [DUT-Server]

PICS:
    - CNET.S.F00

config:
    nodeId: 0x12344321
    cluster: "Network Commissioning"
    #PIXIT.CNET.ENDPOINT_WIFI
    endpoint: 0

    PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID:
        type: octet_string
        defaultValue: "hex:47524C50726976617465"
    PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID:
        type: octet_string
        defaultValue: "hex:7A6967626565686F6D65"
    PIXIT.CNET.WIFI_2ND_ACCESSPOINT_CREDENTIALS:
        type: octet_string
        defaultValue: "hex:70617373776f7264313233"

tests:
    - label: "Precondition: TH reads FeatureMap attribute from the DUT"
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          value: 1
          constraints:
              type: bitmap32

    - label:
          "Step 1: TH sends ArmFailSafe command to the DUT with
          ExpiryLengthSeconds set to 900"
      cluster: "General Commissioning"
      command: "ArmFailSafe"
      arguments:
          values:
              - name: "ExpiryLengthSeconds"
                value: 900
              - name: "Breadcrumb"
                value: 0
      response:
          values:
              - name: "ErrorCode"
                value: 0
              - name: "DebugText"
                value: ""

    - label:
          "Step 2: TH reads Networks attribute from the DUT and saves the number
          of entries as 'NumNetworks'"
      PICS: CNET.S.A0001
      command: "readAttribute"
      attribute: "Networks"
      response:
          saveAs: NumNetworks
          constraints:
              contains:
                  [
                      {
                          NetworkID: PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID,
                          Connected: true,
                      },
                  ]

    - label:
          "Step 3: TH finds the index of the Networks list entry with NetworkID
          for PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID and saves it as
          'Userwifi_netidx'"
      verification: |
          TH finds the index of the Networks list entry with NetworkID for PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID and saves it as 'Userwifi_netidx'
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT && CNET.S.A0001
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 4: TH sends RemoveNetwork Command to the DUT with NetworkID
          field set to PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID and Breadcrumb field
          set to 1"
      verification: |
          Verify that DUT sends NetworkConfigResponse to command with the following fields:
          NetworkingStatus is success

          NetworkIndex is 'Userwifi_netidx'
      PICS: CNET.S.C04.Rsp && CNET.S.C05.Tx
      command: "RemoveNetwork"
      arguments:
          values:
              - name: "NetworkID"
                value: PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID
              - name: "Breadcrumb"
                value: 1
      response:
          values:
              - name: "NetworkingStatus"
                value: 0
              - name: "NetworkIndex"
                value: 0

    - label:
          "Step 5: TH sends AddOrUpdateWiFiNetwork command to the DUT with SSID
          field set to PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID, Credentials field
          set to PIXIT.CNET.WIFI_2ND_ACCESSPOINT_CREDENTIALS and Breadcrumb
          field set to 1"
      PICS: CNET.S.C02.Rsp && CNET.S.C05.Tx
      command: "AddOrUpdateWiFiNetwork"
      arguments:
          values:
              - name: "SSID"
                value: PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID
              - name: "Credentials"
                value: PIXIT.CNET.WIFI_2ND_ACCESSPOINT_CREDENTIALS
              - name: "Breadcrumb"
                value: 1
      response:
          values:
              - name: "NetworkingStatus"
                value: 0
              - name: "DebugText"
                constraints:
                    maxLength: 512

    - label: "Step 6: TH reads Networks attribute from the DUT"
      PICS: CNET.S.A0001
      command: "readAttribute"
      attribute: "Networks"
      response:
          constraints:
              contains:
                  [
                      {
                          NetworkID: PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID,
                          Connected: false,
                      },
                  ]

    - label:
          "Step 7: TH sends ConnectNetwork command to the DUT with NetworkID
          field set to PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID and Breadcrumb field
          set to 2"
      PICS: CNET.C.C06.Tx
      timedInteractionTimeoutMs: 5000
      command: "ConnectNetwork"
      arguments:
          values:
              - name: "NetworkID"
                value: PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID
              - name: "Breadcrumb"
                value: 2
      response:
          values:
              - name: "NetworkingStatus"
                value: 0
              - name: "ErrorValue"
                constraints:
                    type: int32s

    - label:
          "Step 8: TH changes its WiFi connection to
          PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID"
      verification: |
          Make sure TH also joins the 2nd Wifi network to have a connectivity to the DUT.
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 9: TH discovers and connects to DUT on the
          PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID operational network"
      PICS: CNET.S.A0001
      command: "readAttribute"
      attribute: "Networks"
      response:
          constraints:
              contains:
                  [
                      {
                          NetworkID: PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID,
                          Connected: true,
                      },
                  ]

    - label:
          "Step 10: TH reads Breadcrumb attribute from the General Commissioning
          cluster of the DUT"
      PICS: CNET.S.C06.Rsp
      cluster: "General Commissioning"
      command: "readAttribute"
      attribute: "Breadcrumb"
      response:
          value: 2
          constraints:
              type: int64u

    - label:
          "Step 11: TH sends ArmFailSafe command to the DUT with
          ExpiryLengthSeconds set to 0. This forcibly disarms the fail-safe and
          is expected to cause the changes of configuration to
          NetworkCommissioning cluster done so far to be reverted."
      cluster: "General Commissioning"
      command: "ArmFailSafe"
      arguments:
          values:
              - name: "ExpiryLengthSeconds"
                value: 0
              - name: "Breadcrumb"
                value: 0
      response:
          values:
              - name: "ErrorCode"
                value: 0

    #Issue: https://github.com/project-chip/connectedhomeip/issues/26848
    - label:
          "Step 12 & 13: TH changes its WiFi connection to
          PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID, TH discovers and connects to DUT
          on the PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID operational network"
      PICS: CNET.S.A0001 && PICS_USER_PROMPT
      verification: |
          ./chip-tool networkcommissioning read networks 1 0

          Via the TH (chip-tool), Verify:
          -the Networks attribute has NetworkID that should be as PIXIT.CNET.WIFI_1ST_ ACCESSPOINT_SSID.
          -that the connected status should be the type of bool value as TRUE.

          [1684497703.596528][3941:3943] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Attribute 0x0000_0001 DataVersion: 873070909
          [1684497703.596592][3941:3943] CHIP:TOO:   Networks: 1 entries
          [1684497703.596640][3941:3943] CHIP:TOO:     [1]: {
          [1684497703.596668][3941:3943] CHIP:TOO:       NetworkID: 47524C50726976617465
          [1684497703.596697][3941:3943] CHIP:TOO:       Connected: FALSE
          [1684497703.596721][3941:3943] CHIP:TOO:      }
          [1684497703.596882][3941:3943] CHIP:EM: <<< [E:51584i S:48726 M:88313254 (Ack:206238679)] (S) Msg TX to 1:0000000000000001 [3A8F] --- Type 0000:10 (SecureChannel:StandaloneAck)
      cluster: "LogCommands"
      command: "UserPrompt"
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 14: TH sends ArmFailSafe command to the DUT with
          ExpiryLengthSeconds set to 900"
      cluster: "General Commissioning"
      command: "ArmFailSafe"
      arguments:
          values:
              - name: "ExpiryLengthSeconds"
                value: 900
              - name: "Breadcrumb"
                value: 0
      response:
          values:
              - name: "ErrorCode"
                value: 0

    - label:
          "Step 15: TH sends RemoveNetwork Command to the DUT with NetworkID
          field set to PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID and Breadcrumb field
          set to 1"
      verification: |
          Verify that DUT sends NetworkConfigResponse to command with the following fields:
          NetworkingStatus is success

          NetworkIndex is 'Userwifi_netidx'
      PICS: CNET.S.C04.Rsp && CNET.S.C05.Tx
      command: "RemoveNetwork"
      arguments:
          values:
              - name: "NetworkID"
                value: PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID
              - name: "Breadcrumb"
                value: 1
      response:
          values:
              - name: "NetworkingStatus"
                value: 0
              - name: "NetworkIndex"
                value: 0

    - label:
          "Step 16: TH sends AddOrUpdateWiFiNetwork command to the DUT with SSID
          field set to PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID, Credentials field
          set to PIXIT.CNET.WIFI_2ND_ACCESSPOINT_CREDENTIALS and Breadcrumb
          field set to 1"
      PICS: CNET.S.C02.Rsp && CNET.S.C05.Tx
      command: "AddOrUpdateWiFiNetwork"
      arguments:
          values:
              - name: "SSID"
                value: PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID
              - name: "Credentials"
                value: PIXIT.CNET.WIFI_2ND_ACCESSPOINT_CREDENTIALS
              - name: "Breadcrumb"
                value: 1
      response:
          values:
              - name: "NetworkingStatus"
                value: 0
              - name: "DebugText"
                constraints:
                    maxLength: 512

    - label:
          "Step 17: TH sends ConnectNetwork command to the DUT with NetworkID
          field set to PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID and Breadcrumb field
          set to 3"
      PICS: CNET.S.C06.Rsp && CNET.S.C07.Tx
      command: "ConnectNetwork"
      timedInteractionTimeoutMs: 5000
      arguments:
          values:
              - name: "NetworkID"
                value: PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID
              - name: "Breadcrumb"
                value: 3
      response:
          values:
              - name: "NetworkingStatus"
                value: 0
              - name: "ErrorValue"
                constraints:
                    type: int32s

    - label:
          "Step 18: TH changes its WiFi connection to
          PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID"
      verification: |
          Make sure TH also joins the 2nd Wifi network to have a connectivity to the DUT.
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 19: TH discovers and connects to DUT on the
          PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID operational network"
      PICS: CNET.S.A0001
      command: "readAttribute"
      attribute: "Networks"
      response:
          constraints:
              contains:
                  [
                      {
                          NetworkID: PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID,
                          Connected: true,
                      },
                  ]

    - label:
          "Step 20: TH reads Breadcrumb attribute from the General Commissioning
          cluster of the DUT"
      PICS: CNET.S.C06.Rsp
      cluster: "General Commissioning"
      command: "readAttribute"
      attribute: "Breadcrumb"
      response:
          value: 3
          constraints:
              type: int64u

    - label: "Step 21: TH sends the CommissioningComplete command to the DUT"
      cluster: "General Commissioning"
      command: "CommissioningComplete"
      response:
          values:
              - name: "ErrorCode"
                value: 0
              - name: "DebugText"
                value: ""

    - label: "Step 22: TH reads Networks attribute from the DUT"
      PICS: CNET.S.A0001
      command: "readAttribute"
      attribute: "Networks"
      response:
          constraints:
              contains:
                  [
                      {
                          NetworkID: PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID,
                          Connected: true,
                      },
                  ]