# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    189.3.3.[TC-DISHM-3.3] On Mode and Startup Mode functionality with DUT as
    Server

PICS:
    - DISHM.S.A0002
    - DISHM.S.A0003
    - MOD.S.F00
    - OO.S.A4003

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Note"
      verification: |
          To Execute the TC-DISH-3.3 test case using reboot in raspi device we followed the below suggested way:

          To run a reboot test case on raspi, run the app with --KVS flag with a file in local directory and pass that file to the command to launch the app. Steps

            step-1:  create a file using touch command , something like touch mytest.txt
            step-2:  chmod 777 mytest.txt
            step-3:  launch the app ./chip-all-clusters-app --KVS ./mytest.txt

          if you launch the app with the above commands and provision the app, even when you reboot the app with 'sudo reboot' , next time you launch the app with 'sudo ./out/all-clusters-app/chip-all-clusters-app --KVS ./mytest.txt' , you can run read/write attribs and commands without reprovisioning the device.
      disabled: true

    - label:
          "Step 1: Commission DUT to TH (can be skipped if done in a preceding
          test)."
      verification: |

      disabled: true

    - label: "Step 2: TH reads from the DUT the StartUpMode attribute."
      PICS: DISHM.S.A0002
      verification: |
          ./chip-tool dishwashermode read start-up-mode 1 1

          On TH(chip-tool),  Verify that StartUpMode attribute value is an integer or Null
          - Save the value as startup_mode_dut, below is the sample log provided for the raspi platform, Here StartUpMode attribute value is null

          NOTE: if startup_mode_dut is null proceed to step 3. Else save startup_mode_dut as new_start_up_mode_th and proceed to step 5.

          [1651099663211] [82177:7560652] CHIP: [TOO] Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0004 DataVersion: 2609052118
          [1651099663212] [82177:7560652] CHIP: [TOO] StartUpMode: null
      disabled: true

    - label: "Step 3: TH reads from the DUT the SupportedModes attribute."
      PICS: DISHM.S.A0000
      verification: |
          ./chip-tool dishwashermode  read supported-modes 1 1

          On TH(chip-tool) log, Verify DUT response contains a list of ModeOptionsStruct entries
          - Verify that the list has two or more entries
          - Save the Mode field values as supported_modes_dut
          - Select a value from supported_modes_dut and save the value as new_start_up_mode_th, below is the sample log provided for the raspi platform:

          [1690189296.612007][16077:16079] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0000 DataVersion: 1012425327
          [1690189296.612104][16077:16079] CHIP:TOO:   SupportedModes: 3 entries
          [1690189296.612139][16077:16079] CHIP:TOO:     [1]: {
          [1690189296.612149][16077:16079] CHIP:TOO:       Label: Normal
          [1690189296.612168][16077:16079] CHIP:TOO:       Mode: 0
          [1690189296.612189][16077:16079] CHIP:TOO:       ModeTags: 1 entries
          [1690189296.612214][16077:16079] CHIP:TOO:         [1]: {
          [1690189296.612224][16077:16079] CHIP:TOO:           Value: 16384
          [1690189296.612234][16077:16079] CHIP:TOO:          }
          [1690189296.612243][16077:16079] CHIP:TOO:      }
          [1690189296.612264][16077:16079] CHIP:TOO:     [2]: {
          [1690189296.612273][16077:16079] CHIP:TOO:       Label: Heavy
          [1690189296.612282][16077:16079] CHIP:TOO:       Mode: 1
          [1690189296.612296][16077:16079] CHIP:TOO:       ModeTags: 2 entries
          [1690189296.612309][16077:16079] CHIP:TOO:         [1]: {
          [1690189296.612318][16077:16079] CHIP:TOO:           Value: 7
          [1690189296.612327][16077:16079] CHIP:TOO:          }
          [1690189296.612339][16077:16079] CHIP:TOO:         [2]: {
          [1690189296.612348][16077:16079] CHIP:TOO:           Value: 16385
          [1690189296.612356][16077:16079] CHIP:TOO:          }
          [1690189296.612365][16077:16079] CHIP:TOO:      }
          [1690189296.612384][16077:16079] CHIP:TOO:     [3]: {
          [1690189296.612392][16077:16079] CHIP:TOO:       Label: Light
          [1690189296.612398][16077:16079] CHIP:TOO:       Mode: 2
          [1690189296.612413][16077:16079] CHIP:TOO:       ModeTags: 3 entries
          [1690189296.612425][16077:16079] CHIP:TOO:         [1]: {
          [1690189296.612433][16077:16079] CHIP:TOO:           Value: 16386
          [1690189296.612443][16077:16079] CHIP:TOO:          }
          [1690189296.612456][16077:16079] CHIP:TOO:         [2]: {
          [1690189296.612465][16077:16079] CHIP:TOO:           Value: 8
          [1690189296.612473][16077:16079] CHIP:TOO:          }
          [1690189296.612485][16077:16079] CHIP:TOO:         [3]: {
          [1690189296.612494][16077:16079] CHIP:TOO:           Value: 2
          [1690189296.612502][16077:16079] CHIP:TOO:          }
          [1690189296.612511][16077:16079] CHIP:TOO:      }
      disabled: true

    - label:
          "Step 4: TH writes to the DUT the StartUpMode attribute with the
          new_start_up_mode_th value"
      PICS: DISHM.S.A0002
      verification: |
          ./chip-tool dishwashermode write start-up-mode 0 1 1

          On TH(chip-tool) log, Verify that DUT responds with a successful (value 0x00) status response and below is the sample log provided for the raspi platform:

          [1690188912.259766][16011:16013] CHIP:DMG:                         StatusIB =
          [1690188912.259778][16011:16013] CHIP:DMG:                         {
          [1690188912.259790][16011:16013] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1690188912.259800][16011:16013] CHIP:DMG:                         },
          [1690188912.259813][16011:16013] CHIP:DMG:

          ./chip-tool dishwashermode read start-up-mode 1 1

          On TH(chip-tool), Verify that StartUpMode attribute value is 0 and below is the sample log provided for the raspi platform .

          [1692171314.157274][3112:3114] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0002 DataVersion: 2502960195
          [1692171314.157331][3112:3114] CHIP:TOO:   StartUpMode: 0
      disabled: true

    - label: "Step 5: TH reads from the DUT the OnMode attribute."
      PICS: DISHM.S.A0003 && DISHM.S.A0002
      verification: |
          As default value of OnMode attribute is NULL. Set the OnMode to any mode value listed in the SupportedModes entries.

          ./chip-tool dishwashermode write on-mode 0 1 1

          On TH(chip-tool) log, Verify that DUT responds with a successful (value 0x00) status response and below is the sample log provided for the raspi platform:

          [1690189187.414225][16062:16064] CHIP:DMG:                         StatusIB =
          [1690189187.414237][16062:16064] CHIP:DMG:                         {
          [1690189187.414249][16062:16064] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1690189187.414260][16062:16064] CHIP:DMG:                         },


          ./chip-tool dishwashermode read on-mode 1 1

          On TH(chip-tool),  Verify that OnMode attribute value is an integer value
          - Save the value as old_on_mode_dut,  below is the sample log provided for the raspi platform, here OnMode attribute value is 0

          NOTE: If startup_mode_dut is equal to old_on_mode_dut proceed to step 6. Else proceed to step 8.

          [1690189501.554415][16104:16106] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0003 DataVersion: 1012425329
          [1690189501.554429][16104:16106] CHIP:TOO:   OnMode: 0
      disabled: true

    - label: "Step 6: TH reads from the DUT the SupportedModes attribute."
      PICS: DISHM.S.A0000 && DISHM.S.A0002
      verification: |
          ./chip-tool dishwashermode  read supported-modes 1 1

          On TH(chip-tool) log, Verify DUT response contains a list of ModeOptionsStruct entries
          - Verify that the list has two or more entries
          - Save the Mode field values as supported_modes_dut
          - Select a value from supported_modes_dut different from startup_mode_dut. Save the value as new_mode_th, below is the sample log provided for the raspi platform:

          [1690189296.612007][16077:16079] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0000 DataVersion: 1012425327
          [1690189296.612104][16077:16079] CHIP:TOO:   SupportedModes: 3 entries
          [1690189296.612139][16077:16079] CHIP:TOO:     [1]: {
          [1690189296.612149][16077:16079] CHIP:TOO:       Label: Normal
          [1690189296.612168][16077:16079] CHIP:TOO:       Mode: 0
          [1690189296.612189][16077:16079] CHIP:TOO:       ModeTags: 1 entries
          [1690189296.612214][16077:16079] CHIP:TOO:         [1]: {
          [1690189296.612224][16077:16079] CHIP:TOO:           Value: 16384
          [1690189296.612234][16077:16079] CHIP:TOO:          }
          [1690189296.612243][16077:16079] CHIP:TOO:      }
          [1690189296.612264][16077:16079] CHIP:TOO:     [2]: {
          [1690189296.612273][16077:16079] CHIP:TOO:       Label: Heavy
          [1690189296.612282][16077:16079] CHIP:TOO:       Mode: 1
          [1690189296.612296][16077:16079] CHIP:TOO:       ModeTags: 2 entries
          [1690189296.612309][16077:16079] CHIP:TOO:         [1]: {
          [1690189296.612318][16077:16079] CHIP:TOO:           Value: 7
          [1690189296.612327][16077:16079] CHIP:TOO:          }
          [1690189296.612339][16077:16079] CHIP:TOO:         [2]: {
          [1690189296.612348][16077:16079] CHIP:TOO:           Value: 16385
          [1690189296.612356][16077:16079] CHIP:TOO:          }
          [1690189296.612365][16077:16079] CHIP:TOO:      }
          [1690189296.612384][16077:16079] CHIP:TOO:     [3]: {
          [1690189296.612392][16077:16079] CHIP:TOO:       Label: Light
          [1690189296.612398][16077:16079] CHIP:TOO:       Mode: 2
          [1690189296.612413][16077:16079] CHIP:TOO:       ModeTags: 3 entries
          [1690189296.612425][16077:16079] CHIP:TOO:         [1]: {
          [1690189296.612433][16077:16079] CHIP:TOO:           Value: 16386
          [1690189296.612443][16077:16079] CHIP:TOO:          }
          [1690189296.612456][16077:16079] CHIP:TOO:         [2]: {
          [1690189296.612465][16077:16079] CHIP:TOO:           Value: 8
          [1690189296.612473][16077:16079] CHIP:TOO:          }
          [1690189296.612485][16077:16079] CHIP:TOO:         [3]: {
          [1690189296.612494][16077:16079] CHIP:TOO:           Value: 2
          [1690189296.612502][16077:16079] CHIP:TOO:          }
          [1690189296.612511][16077:16079] CHIP:TOO:      }
      disabled: true

    - label:
          "Step 7: TH writes to the DUT the OnMode attribute with the
          new_mode_th value"
      PICS: DISHM.S.A0003
      verification: |
          ./chip-tool dishwashermode write on-mode 2 1 1

          On TH(chip-tool) log, Verify DUT responds with a successful (value 0x00) status response and below is the sample log provided for the raspi platform:

          [1690189470.746137][16086:16088] CHIP:DMG:                         {
          [1690189470.746140][16086:16088] CHIP:DMG:                                 status = 0x00 (SUCCESS),
          [1690189470.746142][16086:16088] CHIP:DMG:                         },
      disabled: true

    - label: "Step 8: TH reads from the DUT the OnMode attribute."
      PICS: DISHM.S.A0003 && MOD.S.F00
      verification: |
          ./chip-tool dishwashermode read on-mode 1 1

          On TH(chip-tool),  Verify that OnMode attribute value is an integer
          - Save the value as new_on_mode_dut and  is equal to new_mode_th and below is the sample log provided for the raspi platform, here OnMode attribute value is 2

          [1690189501.554415][16104:16106] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0003 DataVersion: 1012425329
          [1690189501.554429][16104:16106] CHIP:TOO:   OnMode: 2
      disabled: true

    - label:
          "Step 9: TH writes to the DUT the StartUpOnOff attribute with the
          value 1."
      PICS: OO.S.A4003
      verification: |
          ./chip-tool onoff write start-up-on-off 1 1 1

          On TH(chip-tool) log, Verify DUT responds with a successful (value 0x00) status response and below is the sample log provided for the raspi platform:

          [1651101661960] [90832:7598169] CHIP: [DMG] {
          [1651101661960] [90832:7598169] CHIP: [DMG] status = 0x00 (SUCCESS),
          [1651101661960] [90832:7598169] CHIP: [DMG] },
      disabled: true

    - label: "Step 10: Physically power cycle the device"
      verification: |
          Physically power cycle the device.
      disabled: true

    - label: "Step 11: TH reads from the DUT the StartUpMode attribute."
      PICS: DISHM.S.A0002
      verification: |
          ./chip-tool dishwashermode read start-up-mode 1 1

          On TH(chip-tool),  Verify that StartUpMode attribute value is an integer  and is equal to new_start_up_mode_th, below is the sample log provided for the raspi platform, Here StartUpMode attribute value is 0

          [1651099663211] [82177:7560652] CHIP: [TOO] Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0004 DataVersion: 2609052118
          [1651099663212] [82177:7560652] CHIP: [TOO] StartUpMode: 0
      disabled: true

    - label: "Step 12: TH reads from the DUT the CurrentMode attribute."
      PICS: DISHM.S.A0001
      verification: |
          ./chip-tool dishwashermode read current-mode 1 1

          On TH(chip-tool), Verify that CurrentMode attribute value is an integer value and is equal to new_on_mode_dut,  below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 2

          [1690189536.790233][16118:16120] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0001 DataVersion: 4080703118
          [1690189536.790280][16118:16120] CHIP:TOO:   CurrentMode: 2
      disabled: true