examples/pump-app/nrfconnect/README.md - third_party/github/project-chip/connectedhomeip - Git at Google

 # Matter nRF Connect Pump Example Application

 > **Note:** This example is intended only to perform smoke tests of a Matter
 > solution integrated with nRF Connect SDK platform. The example quality is not
 > production ready and it may contain minor bugs or use not optimal
 > configuration. It is not recommended to use this example as a basis for
 > creating a market ready product.
 >
 > For the production ready and optimized Matter samples, see
 > [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
 > The Matter samples in nRF Connect SDK use various additional software
 > components and provide multiple optional features that improve the developer
 > and user experience. To read more about it, see
 > [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
 > page. Using Matter samples from nRF Connect SDK allows you to get a full
 > Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
 > portal.

 The nRF Connect Pump Example demonstrates how to remotely control a pump device
 with basic start/stop functionality. It uses buttons to test changing the pump
 state and device states and LEDs to show the state of these changes. This
 example is inherited from the "lock-app" example but modified to simulate a pump
 device and can be used as a reference for creating your own pump application.

 <img src="../../platform/nrfconnect/doc/images/Logo_RGB_H-small.png" alt="Nordic Semiconductor logo"/>
 <img src="../../platform/nrfconnect/doc/images/nRF52840-DK-small.png" alt="nRF52840 DK"/>

 The example is based on
 [Matter](https://github.com/project-chip/connectedhomeip) and Nordic
 Semiconductor's nRF Connect SDK, and supports remote access and control of a
 simulated pump over a low-power, 802.15.4 Thread network.

 The example behaves as a Matter accessory, that is a device that can be paired
 into an existing Matter network and can be controlled by this network. The
 device works as a Thread Minimal End Device.

 <hr>

 ## Overview

 This example is running on the nRF Connect platform, which is based on Nordic
 Semiconductor's
 [nRF Connect SDK](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/index.html)
 and [Zephyr RTOS](https://zephyrproject.org/). Visit Matter's
 [nRF Connect platform overview](../../../docs/guides/nrfconnect_platform_overview.md)
 to read more about the platform structure and dependencies.

 The Matter device that runs the pump application is controlled by the Matter
 controller device over the Thread protocol. By default, the Matter accessory
 device has IPv6 networking disabled. You must pair it with the Matter controller
 over Bluetooth® LE to get the configuration from the controller to use the
 device within a Thread or Wi-Fi network. You have to make the device
 discoverable manually (for security reasons). See
 [Bluetooth LE advertising](#bluetooth-le-advertising) to learn how to do this.
 The controller must get the commissioning information from the Matter accessory
 device and provision the device into the network.

 You can test this application remotely over the Thread or the Wi-Fi protocol,
 which in either case requires more devices, including a Matter controller that
 you can configure either on a PC or a mobile device.

 ### Bluetooth LE advertising

 In this example, to commission the device onto a Matter network, it must be
 discoverable over Bluetooth LE. For security reasons, you must start Bluetooth
 LE advertising manually after powering up the device by pressing **Button 4**.

 ### Bluetooth LE rendezvous

 In this example, the commissioning procedure (called rendezvous) is done over
 Bluetooth LE between a Matter device and the Matter controller, where the
 controller has the commissioner role.

 To start the rendezvous, the controller must get the commissioning information
 from the Matter device. The data payload is encoded within a QR code, printed to
 the UART console, and shared using an NFC tag. For security reasons, you must
 start NFC tag emulation manually after powering up the device by pressing
 **Button 4**.

 #### Thread provisioning

 Last part of the rendezvous procedure, the provisioning operation involves
 sending the Thread network credentials from the Matter controller to the Matter
 device. As a result, device is able to join the Thread network and communicate
 with other Thread devices in the network.

 ### Device Firmware Upgrade

 The example supports over-the-air (OTA) device firmware upgrade (DFU) using one
 of the two available methods:

 -   Matter OTA update that is mandatory for Matter-compliant devices and enabled
     by default
 -   [Simple Management Protocol](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/zephyr/guides/device_mgmt/index.html#device-mgmt)
     over Bluetooth LE, an optional proprietary method that can be enabled to
     work alongside the default Matter OTA update. Note that this protocol is not
     a part of the Matter specification.

 For both methods, the
 [MCUboot](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/mcuboot/index.html)
 bootloader solution is used to replace the old firmware image with the new one.

 #### Matter Over-the-Air Update

 The Matter over-the-air update distinguishes two types of nodes: OTA Provider
 and OTA Requestor.

 An OTA Provider is a node that hosts a new firmware image and is able to respond
 on an OTA Requestor's queries regarding availability of new firmware images or
 requests to start sending the update packages.

 An OTA Requestor is a node that wants to download a new firmware image and sends
 requests to an OTA Provider to start the update process.

 #### Simple Management Protocol

 Simple Management Protocol (SMP) is a basic transfer encoding that is used for
 device management purposes, including application image management. SMP supports
 using different transports, such as Bluetooth LE, UDP, or serial USB/UART.

 In this example, the Matter device runs the SMP Server to download the
 application update image using the Bluetooth LE transport.

 See the
 [Building with Device Firmware Upgrade support](#building-with-device-firmware-upgrade-support)
 section to learn how to enable SMP and use it for the DFU purpose in this
 example.

 #### Bootloader

 MCUboot is a secure bootloader used for swapping firmware images of different
 versions and generating proper build output files that can be used in the device
 firmware upgrade process.

 The bootloader solution requires an area of flash memory to swap application
 images during the firmware upgrade. Nordic Semiconductor devices use an external
 memory chip for this purpose. The memory chip communicates with the
 microcontroller through the QSPI bus.

 See the
 [Building with Device Firmware Upgrade support](#building-with-device-firmware-upgrade-support)
 section to learn how to change MCUboot and flash configuration in this example.

 <hr>

 ## Requirements

 The application requires a specific revision of the nRF Connect SDK to work
 correctly. See [Setting up the environment](#setting-up-the-environment) for
 more information.

 ### Supported devices

 The example supports building and running on the following devices:

 | Hardware platform                                                                         | Build target               | Platform image                                                                                                                                   |
 | ----------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------ |
 | [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk/nrf52840`      | <details><summary>nRF52840 DK</summary><img src="../../platform/nrfconnect/doc/images/nRF52840_DK_info-medium.jpg" alt="nRF52840 DK"/></details> |
 | [nRF5340 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK)   | `nrf5340dk/nrf5340/cpuapp` | <details><summary>nRF5340 DK</summary><img src="../../platform/nrfconnect/doc/images/nRF5340_DK_info-medium.jpg" alt="nRF5340 DK"/></details>    |

 <hr>

 ## Device UI

 This section lists the User Interface elements that you can use to control and
 monitor the state of the device. These correspond to PCB components on the
 platform image.

 **LED 1** shows the overall state of the device and its connectivity. The
 following states are possible:

 -   _Short Flash On (50 ms on/950 ms off)_ &mdash; The device is in the
     unprovisioned (unpaired) state and is waiting for a commissioning
     application to connect.

 -   _Rapid Even Flashing (100 ms on/100 ms off)_ &mdash; The device is in the
     unprovisioned state and a commissioning application is connected through
     Bluetooth LE.

 -   _Short Flash Off (950ms on/50ms off)_ &mdash; The device is fully
     provisioned, but does not yet have full connectivity for Thread or Wi-Fi
     network.

 -   _Solid On_ &mdash; The device is fully provisioned and has full Thread
     network and service connectivity.

 **LED 2** simulates the pump motor and shows the state of the pump. The
 following states are possible:

 -   _Solid On_ &mdash; The pump is running.

 -   _Off_ &mdash; The pump is stopped.

 -   _Rapid Even Flashing (100 ms on/100 ms off during 2 s)_ &mdash; The
     simulated pump motor is starting.

 **Button 1** can be used for the following purposes:

 -   _Pressed for 6 s_ &mdash; Initiates the factory reset of the device.
     Releasing the button within the 6-second window cancels the factory reset
     procedure. **LEDs 1-4** blink in unison when the factory reset procedure is
     initiated.

 -   _Pressed for less than 3 s_ &mdash; Initiates the OTA software update
     process. This feature is not currently supported.

 **Button 2** &mdash; Pressing the button once changes the pump state to the
 opposite one.

 **Button 4** &mdash; Pressing the button once starts the NFC tag emulation and
 enables Bluetooth LE advertising for the predefined period of time (15 minutes
 by default).

 **SEGGER J-Link USB port** can be used to get logs from the device or
 communicate with it using the
 [command line interface](../../../docs/guides/nrfconnect_examples_cli.md).

 **NFC port with antenna attached** can be used to start the
 [rendezvous](#bluetooth-le-rendezvous) by providing the commissioning
 information from the Matter device in a data payload that can be shared using
 NFC.

 <hr>

 ## Setting up the environment

 Before building the example, check out the Matter repository and sync submodules
 using the following command:

         $ python3 scripts/checkout_submodules.py --shallow --platform nrfconnect

 > **Note**:
 >
 > For Linux operating system install
 > [SEGGER J-Link Software](https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack).

 ### Install Command Line Tools

 With admin permissions enabled, download and install the
 [nRF Command Line Tools](https://www.nordicsemi.com/Products/Development-tools/nrf-command-line-tools).

 ### Install Toolchain Manager

 Toolchain Manager is available from
 [nRF Connect for Desktop](https://www.nordicsemi.com/Products/Development-tools/nrf-connect-for-desktop),
 a cross-platform tool that provides different applications that simplify
 installing the nRF Connect SDK. Both the tool and the application are available
 for Windows, Linux, and macOS.

 To install the Toolchain Manager app, complete the following steps:

 1.  [Download nRF Connect for Desktop](https://www.nordicsemi.com/Products/Development-tools/nrf-connect-for-desktop/download#infotabs)
     for your operating system.

 2.  Install and run the tool on your machine.

 3.  In the **APPS** section, click **Install** button on the Toolchain Manager
     tab.

 ### Install nRF Connect SDK

 Complete the following steps to install the nRF Connect SDK:

 1.  Open Toolchain Manager in nRF Connect for Desktop.

 2.  Click the **Install** button next to the
     [recommended](../../../config/nrfconnect/.nrfconnect-recommended-revision)
     version of the nRF Connect SDK.

 3.  A pop-up window will inform you about the current installation directory. If
     you want to change the directory, click the **Change directory** button.
     Otherwise, click the **Continue installation** button.

 4.  When the nRF Connect SDK is installed on your machine, the **Install**
     button changes to the **Open VS Code** button.

 5.  Click the dropdown menu next to the **Open VS Code** button for the
     installed nRF Connect SDK version, and select **Open terminal**.

 6.  Make sure that the nRF Connect SDK version is compatible with the Matter SDK
     version:

     ```
          $ cd {connectedhomeip directory}
          $ python3 scripts/setup/nrfconnect/update_ncs.py --update
     ```

 Now you can proceed with the [Building](#building) instruction.

 <hr>

 ## Building

 Complete the following steps to build the sample:

 1.  Navigate to the example's directory:

         $ cd examples/pump-app/nrfconnect

 2.  Run the following command to build the example, with _build-target_ replaced
     with the build target name of the Nordic Semiconductor's kit you own, for
     example `nrf52840dk/nrf52840`:

          $ west build -b build-target --sysbuild

     You only need to specify the build target on the first build. See
     [Requirements](#requirements) for the build target names of compatible kits.

 The output `zephyr.hex` file will be available in the `build/nrfconnect/zephyr/`
 directory.

 ### Removing build artifacts

 If you're planning to build the example for a different kit or make changes to
 the configuration, remove all build artifacts before building. To do so, use the
 following command:

     $ rm -r build

 ### Building with release configuration

 To build the example with release configuration that disables the diagnostic
 features like logs and command-line interface, run the following command:

     $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=release

 Remember to replace _build-target_ with the build target name of the Nordic
 Semiconductor's kit you own.

 ### Building with Device Firmware Upgrade support

 Support for DFU using Matter OTA is enabled by default.

 To enable DFU over Bluetooth LE, run the following command with _build-target_
 replaced with the build target name of the Nordic Semiconductor kit you are
 using (for example `nrf52840dk/nrf52840`):

     $ west build -b build-target --sysbuild -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y

 > **Note**:
 >
 > There are two types of Device Firmware Upgrade modes: single-image DFU and
 > multi-image DFU. Single-image mode supports upgrading only one firmware image,
 > the application image, and should be used for single-core nRF52840 DK devices.
 > Multi-image mode allows to upgrade more firmware images and is suitable for
 > upgrading the application core and network core firmware in two-core nRF5340
 > DK devices.
 >
 > Currently the multi-image mode is only available for the DFU over Bluetooth LE
 > method.

 #### Changing bootloader configuration

 To change the default MCUboot configuration, edit the `prj.conf` file located in
 the `sysbuild/mcuboot` directory.

 Make sure to keep the configuration consistent with changes made to the
 application configuration. This is necessary for the configuration to work, as
 the bootloader image is a separate application from the user application and it
 has its own configuration file.

 #### Changing flash memory settings

 In the default configuration, the MCUboot uses the
 [Partition Manager](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/scripts/partition_manager/partition_manager.html#partition-manager)
 to configure flash partitions used for the bootloader application image slot
 purposes. You can change these settings by defining
 [static partitions](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/scripts/partition_manager/partition_manager.html#ug-pm-static).
 This example uses this option to define using an external flash.

 To modify the flash settings of your board (that is, your _build-target_, for
 example `nrf52840dk/nrf52840`), edit the `pm_static_<build_target>.yml` file
 (for example `pm_static_nrf52840dk_nrf52840.yml`), located in the main
 application directory.

 <hr>

 ## Configuring the example

 The Zephyr ecosystem is based on Kconfig files and the settings can be modified
 using the menuconfig utility.

 To open the menuconfig utility, run the following command from the example
 directory:

     $ west build -b build-target --sysbuild -t menuconfig

 Remember to replace _build-target_ with the build target name of the Nordic
 Semiconductor's kit you own.

 Changes done with menuconfig will be lost if the `build` directory is deleted.
 To make them persistent, save the configuration options in the `prj.conf` file.

 ### Example build types

 The example uses different configuration files depending on the supported
 features. Configuration files are provided for different build types and they
 are located in the application root directory.

 The `prj.conf` file represents a debug build type. Other build types are covered
 by dedicated files with the build type added as a suffix to the prj part, as per
 the following list. For example, the release build type file name is
 `prj_release.conf`. If a board has other configuration files, for example
 associated with partition layout or child image configuration, these follow the
 same pattern.

 Before you start testing the application, you can select one of the build types
 supported by the sample. This sample supports the following build types,
 depending on the selected board:

 -   debug -- Debug version of the application - can be used to enable additional
     features for verifying the application behavior, such as logs or
     command-line shell.
 -   release -- Release version of the application - can be used to enable only
     the necessary application functionalities to optimize its performance.

 For more information, see the
 [Configuring nRF Connect SDK examples](../../../docs/guides/nrfconnect_examples_configuration.md)
 page.

 <hr>

 ## Flashing and debugging

 To flash the application to the device, use the west tool and run the following
 command from the example directory:

         $ west flash --erase

 If you have multiple development kits connected, west will prompt you to pick
 the correct one.

 To debug the application on target, run the following command from the example
 directory:

         $ west debug

 <hr>

 ## Testing the example

 Check the [CLI tutorial](../../../docs/guides/nrfconnect_examples_cli.md) to
 learn how to use command-line interface of the application.

 ### Testing using Linux CHIPTool

 Read the [CHIP Tool user guide](../../../docs/guides/chip_tool_guide.md) to see
 how to use [CHIP Tool for Linux or mac OS](../../chip-tool/README.md) to
 commission and control the application within a Matter-enabled Thread network.

 ### Testing using Android CHIPTool

 Read the
 [Android commissioning guide](../../../docs/guides/nrfconnect_android_commissioning.md)
 to see how to use [CHIPTool](../../../examples/android/CHIPTool/README.md) for
 Android smartphones to commission and control the application within a
 Matter-enabled Thread network.
	# Matter nRF Connect Pump Example Application

	> Note: This example is intended only to perform smoke tests of a Matter
	> solution integrated with nRF Connect SDK platform. The example quality is not
	> production ready and it may contain minor bugs or use not optimal
	> configuration. It is not recommended to use this example as a basis for
	> creating a market ready product.
	>
	> For the production ready and optimized Matter samples, see
	> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
	> The Matter samples in nRF Connect SDK use various additional software
	> components and provide multiple optional features that improve the developer
	> and user experience. To read more about it, see
	> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
	> page. Using Matter samples from nRF Connect SDK allows you to get a full
	> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
	> portal.

	The nRF Connect Pump Example demonstrates how to remotely control a pump device
	with basic start/stop functionality. It uses buttons to test changing the pump
	state and device states and LEDs to show the state of these changes. This
	example is inherited from the "lock-app" example but modified to simulate a pump
	device and can be used as a reference for creating your own pump application.

	<img src="../../platform/nrfconnect/doc/images/Logo_RGB_H-small.png" alt="Nordic Semiconductor logo"/>
	<img src="../../platform/nrfconnect/doc/images/nRF52840-DK-small.png" alt="nRF52840 DK"/>

	The example is based on
	[Matter](https://github.com/project-chip/connectedhomeip) and Nordic
	Semiconductor's nRF Connect SDK, and supports remote access and control of a
	simulated pump over a low-power, 802.15.4 Thread network.

	The example behaves as a Matter accessory, that is a device that can be paired
	into an existing Matter network and can be controlled by this network. The
	device works as a Thread Minimal End Device.

	<hr>

	## Overview

	This example is running on the nRF Connect platform, which is based on Nordic
	Semiconductor's
	[nRF Connect SDK](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/index.html)
	and [Zephyr RTOS](https://zephyrproject.org/). Visit Matter's
	[nRF Connect platform overview](../../../docs/guides/nrfconnect_platform_overview.md)
	to read more about the platform structure and dependencies.

	The Matter device that runs the pump application is controlled by the Matter
	controller device over the Thread protocol. By default, the Matter accessory
	device has IPv6 networking disabled. You must pair it with the Matter controller
	over Bluetooth® LE to get the configuration from the controller to use the
	device within a Thread or Wi-Fi network. You have to make the device
	discoverable manually (for security reasons). See
	[Bluetooth LE advertising](#bluetooth-le-advertising) to learn how to do this.
	The controller must get the commissioning information from the Matter accessory
	device and provision the device into the network.

	You can test this application remotely over the Thread or the Wi-Fi protocol,
	which in either case requires more devices, including a Matter controller that
	you can configure either on a PC or a mobile device.

	### Bluetooth LE advertising

	In this example, to commission the device onto a Matter network, it must be
	discoverable over Bluetooth LE. For security reasons, you must start Bluetooth
	LE advertising manually after powering up the device by pressing Button 4.

	### Bluetooth LE rendezvous

	In this example, the commissioning procedure (called rendezvous) is done over
	Bluetooth LE between a Matter device and the Matter controller, where the
	controller has the commissioner role.

	To start the rendezvous, the controller must get the commissioning information
	from the Matter device. The data payload is encoded within a QR code, printed to
	the UART console, and shared using an NFC tag. For security reasons, you must
	start NFC tag emulation manually after powering up the device by pressing
	Button 4.

	#### Thread provisioning

	Last part of the rendezvous procedure, the provisioning operation involves
	sending the Thread network credentials from the Matter controller to the Matter
	device. As a result, device is able to join the Thread network and communicate
	with other Thread devices in the network.

	### Device Firmware Upgrade

	The example supports over-the-air (OTA) device firmware upgrade (DFU) using one
	of the two available methods:

	- Matter OTA update that is mandatory for Matter-compliant devices and enabled
	by default
	- [Simple Management Protocol](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/zephyr/guides/device_mgmt/index.html#device-mgmt)
	over Bluetooth LE, an optional proprietary method that can be enabled to
	work alongside the default Matter OTA update. Note that this protocol is not
	a part of the Matter specification.

	For both methods, the
	[MCUboot](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/mcuboot/index.html)
	bootloader solution is used to replace the old firmware image with the new one.

	#### Matter Over-the-Air Update

	The Matter over-the-air update distinguishes two types of nodes: OTA Provider
	and OTA Requestor.

	An OTA Provider is a node that hosts a new firmware image and is able to respond
	on an OTA Requestor's queries regarding availability of new firmware images or
	requests to start sending the update packages.

	An OTA Requestor is a node that wants to download a new firmware image and sends
	requests to an OTA Provider to start the update process.

	#### Simple Management Protocol

	Simple Management Protocol (SMP) is a basic transfer encoding that is used for
	device management purposes, including application image management. SMP supports
	using different transports, such as Bluetooth LE, UDP, or serial USB/UART.

	In this example, the Matter device runs the SMP Server to download the
	application update image using the Bluetooth LE transport.

	See the
	[Building with Device Firmware Upgrade support](#building-with-device-firmware-upgrade-support)
	section to learn how to enable SMP and use it for the DFU purpose in this
	example.

	#### Bootloader

	MCUboot is a secure bootloader used for swapping firmware images of different
	versions and generating proper build output files that can be used in the device
	firmware upgrade process.

	The bootloader solution requires an area of flash memory to swap application
	images during the firmware upgrade. Nordic Semiconductor devices use an external
	memory chip for this purpose. The memory chip communicates with the
	microcontroller through the QSPI bus.

	See the
	[Building with Device Firmware Upgrade support](#building-with-device-firmware-upgrade-support)
	section to learn how to change MCUboot and flash configuration in this example.

	<hr>

	## Requirements

	The application requires a specific revision of the nRF Connect SDK to work
	correctly. See [Setting up the environment](#setting-up-the-environment) for
	more information.

	### Supported devices

	The example supports building and running on the following devices:

	\| Hardware platform \| Build target \| Platform image \|
	\| ----------------------------------------------------------------------------------------- \| -------------------------- \| ------------------------------------------------------------------------------------------------------------------------------------------------ \|
	\| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) \| `nrf52840dk/nrf52840` \| <details><summary>nRF52840 DK</summary><img src="../../platform/nrfconnect/doc/images/nRF52840_DK_info-medium.jpg" alt="nRF52840 DK"/></details> \|
	\| [nRF5340 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK) \| `nrf5340dk/nrf5340/cpuapp` \| <details><summary>nRF5340 DK</summary><img src="../../platform/nrfconnect/doc/images/nRF5340_DK_info-medium.jpg" alt="nRF5340 DK"/></details> \|

	<hr>

	## Device UI

	This section lists the User Interface elements that you can use to control and
	monitor the state of the device. These correspond to PCB components on the
	platform image.

	LED 1 shows the overall state of the device and its connectivity. The
	following states are possible:

	- _Short Flash On (50 ms on/950 ms off)_ — The device is in the
	unprovisioned (unpaired) state and is waiting for a commissioning
	application to connect.

	- _Rapid Even Flashing (100 ms on/100 ms off)_ — The device is in the
	unprovisioned state and a commissioning application is connected through
	Bluetooth LE.

	- _Short Flash Off (950ms on/50ms off)_ — The device is fully
	provisioned, but does not yet have full connectivity for Thread or Wi-Fi
	network.

	- _Solid On_ — The device is fully provisioned and has full Thread
	network and service connectivity.

	LED 2 simulates the pump motor and shows the state of the pump. The
	following states are possible:

	- _Solid On_ — The pump is running.

	- _Off_ — The pump is stopped.

	- _Rapid Even Flashing (100 ms on/100 ms off during 2 s)_ — The
	simulated pump motor is starting.

	Button 1 can be used for the following purposes:

	- _Pressed for 6 s_ — Initiates the factory reset of the device.
	Releasing the button within the 6-second window cancels the factory reset
	procedure. LEDs 1-4 blink in unison when the factory reset procedure is
	initiated.

	- _Pressed for less than 3 s_ — Initiates the OTA software update
	process. This feature is not currently supported.

	Button 2 — Pressing the button once changes the pump state to the
	opposite one.

	Button 4 — Pressing the button once starts the NFC tag emulation and
	enables Bluetooth LE advertising for the predefined period of time (15 minutes
	by default).

	SEGGER J-Link USB port can be used to get logs from the device or
	communicate with it using the
	[command line interface](../../../docs/guides/nrfconnect_examples_cli.md).

	NFC port with antenna attached can be used to start the
	[rendezvous](#bluetooth-le-rendezvous) by providing the commissioning
	information from the Matter device in a data payload that can be shared using
	NFC.

	<hr>

	## Setting up the environment

	Before building the example, check out the Matter repository and sync submodules
	using the following command:

	$ python3 scripts/checkout_submodules.py --shallow --platform nrfconnect

	> Note:
	>
	> For Linux operating system install
	> [SEGGER J-Link Software](https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack).

	### Install Command Line Tools

	With admin permissions enabled, download and install the
	[nRF Command Line Tools](https://www.nordicsemi.com/Products/Development-tools/nrf-command-line-tools).

	### Install Toolchain Manager

	Toolchain Manager is available from
	[nRF Connect for Desktop](https://www.nordicsemi.com/Products/Development-tools/nrf-connect-for-desktop),
	a cross-platform tool that provides different applications that simplify
	installing the nRF Connect SDK. Both the tool and the application are available
	for Windows, Linux, and macOS.

	To install the Toolchain Manager app, complete the following steps:

	1. [Download nRF Connect for Desktop](https://www.nordicsemi.com/Products/Development-tools/nrf-connect-for-desktop/download#infotabs)
	for your operating system.

	2. Install and run the tool on your machine.

	3. In the APPS section, click Install button on the Toolchain Manager
	tab.

	### Install nRF Connect SDK

	Complete the following steps to install the nRF Connect SDK:

	1. Open Toolchain Manager in nRF Connect for Desktop.

	2. Click the Install button next to the
	[recommended](../../../config/nrfconnect/.nrfconnect-recommended-revision)
	version of the nRF Connect SDK.

	3. A pop-up window will inform you about the current installation directory. If
	you want to change the directory, click the Change directory button.
	Otherwise, click the Continue installation button.

	4. When the nRF Connect SDK is installed on your machine, the Install
	button changes to the Open VS Code button.

	5. Click the dropdown menu next to the Open VS Code button for the
	installed nRF Connect SDK version, and select Open terminal.

	6. Make sure that the nRF Connect SDK version is compatible with the Matter SDK
	version:

	```
	$ cd {connectedhomeip directory}
	$ python3 scripts/setup/nrfconnect/update_ncs.py --update
	```

	Now you can proceed with the [Building](#building) instruction.

	<hr>

	## Building

	Complete the following steps to build the sample:

	1. Navigate to the example's directory:

	$ cd examples/pump-app/nrfconnect

	2. Run the following command to build the example, with _build-target_ replaced
	with the build target name of the Nordic Semiconductor's kit you own, for
	example `nrf52840dk/nrf52840`:

	$ west build -b build-target --sysbuild

	You only need to specify the build target on the first build. See
	[Requirements](#requirements) for the build target names of compatible kits.

	The output `zephyr.hex` file will be available in the `build/nrfconnect/zephyr/`
	directory.

	### Removing build artifacts

	If you're planning to build the example for a different kit or make changes to
	the configuration, remove all build artifacts before building. To do so, use the
	following command:

	$ rm -r build

	### Building with release configuration

	To build the example with release configuration that disables the diagnostic
	features like logs and command-line interface, run the following command:

	$ west build -b build-target --sysbuild -- -DFILE_SUFFIX=release

	Remember to replace _build-target_ with the build target name of the Nordic
	Semiconductor's kit you own.

	### Building with Device Firmware Upgrade support

	Support for DFU using Matter OTA is enabled by default.

	To enable DFU over Bluetooth LE, run the following command with _build-target_
	replaced with the build target name of the Nordic Semiconductor kit you are
	using (for example `nrf52840dk/nrf52840`):

	$ west build -b build-target --sysbuild -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y

	> Note:
	>
	> There are two types of Device Firmware Upgrade modes: single-image DFU and
	> multi-image DFU. Single-image mode supports upgrading only one firmware image,
	> the application image, and should be used for single-core nRF52840 DK devices.
	> Multi-image mode allows to upgrade more firmware images and is suitable for
	> upgrading the application core and network core firmware in two-core nRF5340
	> DK devices.
	>
	> Currently the multi-image mode is only available for the DFU over Bluetooth LE
	> method.

	#### Changing bootloader configuration

	To change the default MCUboot configuration, edit the `prj.conf` file located in
	the `sysbuild/mcuboot` directory.

	Make sure to keep the configuration consistent with changes made to the
	application configuration. This is necessary for the configuration to work, as
	the bootloader image is a separate application from the user application and it
	has its own configuration file.

	#### Changing flash memory settings

	In the default configuration, the MCUboot uses the
	[Partition Manager](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/scripts/partition_manager/partition_manager.html#partition-manager)
	to configure flash partitions used for the bootloader application image slot
	purposes. You can change these settings by defining
	[static partitions](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/scripts/partition_manager/partition_manager.html#ug-pm-static).
	This example uses this option to define using an external flash.

	To modify the flash settings of your board (that is, your _build-target_, for
	example `nrf52840dk/nrf52840`), edit the `pm_static_<build_target>.yml` file
	(for example `pm_static_nrf52840dk_nrf52840.yml`), located in the main
	application directory.

	<hr>

	## Configuring the example

	The Zephyr ecosystem is based on Kconfig files and the settings can be modified
	using the menuconfig utility.

	To open the menuconfig utility, run the following command from the example
	directory:

	$ west build -b build-target --sysbuild -t menuconfig

	Remember to replace _build-target_ with the build target name of the Nordic
	Semiconductor's kit you own.

	Changes done with menuconfig will be lost if the `build` directory is deleted.
	To make them persistent, save the configuration options in the `prj.conf` file.

	### Example build types

	The example uses different configuration files depending on the supported
	features. Configuration files are provided for different build types and they
	are located in the application root directory.

	The `prj.conf` file represents a debug build type. Other build types are covered
	by dedicated files with the build type added as a suffix to the prj part, as per
	the following list. For example, the release build type file name is
	`prj_release.conf`. If a board has other configuration files, for example
	associated with partition layout or child image configuration, these follow the
	same pattern.

	Before you start testing the application, you can select one of the build types
	supported by the sample. This sample supports the following build types,
	depending on the selected board:

	- debug -- Debug version of the application - can be used to enable additional
	features for verifying the application behavior, such as logs or
	command-line shell.
	- release -- Release version of the application - can be used to enable only
	the necessary application functionalities to optimize its performance.

	For more information, see the
	[Configuring nRF Connect SDK examples](../../../docs/guides/nrfconnect_examples_configuration.md)
	page.

	<hr>

	## Flashing and debugging

	To flash the application to the device, use the west tool and run the following
	command from the example directory:

	$ west flash --erase

	If you have multiple development kits connected, west will prompt you to pick
	the correct one.

	To debug the application on target, run the following command from the example
	directory:

	$ west debug

	<hr>

	## Testing the example

	Check the [CLI tutorial](../../../docs/guides/nrfconnect_examples_cli.md) to
	learn how to use command-line interface of the application.

	### Testing using Linux CHIPTool

	Read the [CHIP Tool user guide](../../../docs/guides/chip_tool_guide.md) to see
	how to use [CHIP Tool for Linux or mac OS](../../chip-tool/README.md) to
	commission and control the application within a Matter-enabled Thread network.

	### Testing using Android CHIPTool

	Read the
	[Android commissioning guide](../../../docs/guides/nrfconnect_android_commissioning.md)
	to see how to use [CHIPTool](../../../examples/android/CHIPTool/README.md) for
	Android smartphones to commission and control the application within a
	Matter-enabled Thread network.