# CHIP Linux Lighting Example (Data Mode, No Unique ID)

An example was created to perform TC-MCORE-FS-1.3 test. This is a copy of
original CHIP Linux Lighting Example. The difference is that this example does
not use UniqueID for the device, and Revision of the device is kept to revision
where it is allowed.

An example showing the use of CHIP on the Linux. The document will describe how
to build and run CHIP Linux Lighting Example on Raspberry Pi. This doc is tested
on **Ubuntu for Raspberry Pi Server 20.04 LTS (aarch64)** and **Ubuntu for
Raspberry Pi Desktop 20.10 (aarch64)**

To cross-compile this example on x64 host and run on **NXP i.MX 8M Mini**
**EVK**, see the associated
[README document](../../../docs/platforms/nxp/nxp_imx8m_linux_examples.md) for
details.

<hr>

-   [CHIP Linux Lighting Example (Data Mode, No Unique ID)](#chip-linux-lighting-example-data-mode-no-unique-id)
    -   [Building](#building)
    -   [Commandline arguments](#commandline-arguments)
    -   [Running the Complete Example on Raspberry Pi 4](#running-the-complete-example-on-raspberry-pi-4)
    -   [Running RPC Console](#running-rpc-console)
    -   [Device Tracing](#device-tracing)
    -   [Trigger event using lighting-app event named pipe](#trigger-event-using-lighting-app-event-named-pipe)
        -   [Trigger `SoftwareFault` events](#trigger-softwarefault-events)
        -   [Trigger `HardwareFault` events](#trigger-hardwarefault-events)
        -   [Trigger Switch events](#trigger-switch-events)

<hr>

## Building

-   Install tool chain

          $ sudo apt-get install git gcc g++ python pkg-config libssl-dev libdbus-1-dev libglib2.0-dev ninja-build python3-venv python3-dev unzip

-   Build the example application:

          $ cd ~/connectedhomeip/examples/lighting-app-data-mode-no-unique-id/linux
          $ git submodule update --init
          $ source third_party/connectedhomeip/scripts/activate.sh
          $ gn gen out/debug
          $ ninja -C out/debug

-   To delete generated executable, libraries and object files use:

          $ cd ~/connectedhomeip/examples/lighting-app-data-mode-no-unique-id/linux
          $ rm -rf out/

-   Build the example with pigweed RPC

          $ cd ~/connectedhomeip/examples/lighting-app-data-mode-no-unique-id/linux
          $ git submodule update --init
          $ source third_party/connectedhomeip/scripts/activate.sh
          $ gn gen out/debug --args='import("//with_pw_rpc.gni")'
          $ ninja -C out/debug

## Commandline arguments

-   `--wifi`

    Enables WiFi management feature. Required for WiFi commissioning.

-   `--thread`

    Enables Thread management feature, requires ot-br-posix dbus daemon running.
    Required for Thread commissioning.

-   `--ble-controller <selector>`

    Use the specific Bluetooth controller for BLE advertisement and connections.
    For details on controller selection refer to
    [Linux BLE Settings](/platforms/linux/ble_settings.md).

## Running the Complete Example on Raspberry Pi 4

> If you want to test Echo protocol, please enable Echo handler
>
>     gn gen out/debug --args='chip_app_use_echo=true'
>     ninja -C out/debug

-   Prerequisites

    1. A Raspberry Pi 4 board
    2. A USB Bluetooth Dongle, Ubuntu desktop will send Bluetooth advertisement,
       which will block CHIP from connecting via BLE. On Ubuntu server, you need
       to install `pi-bluetooth` via APT.
    3. Ubuntu 20.04 or newer image for ARM64 platform.

-   Building

    Follow [Building](#building) section of this document.

-   Running

    -   [Optional] Plug USB Bluetooth dongle

        -   Plug USB Bluetooth dongle and find its bluetooth controller selector
            as described in
            [Linux BLE Settings](/platforms/linux/ble_settings.md).

    -   Run Linux Lighting Example App

              $ cd ~/connectedhomeip/examples/lighting-app/linux
              $ sudo out/debug/chip-lighting-app-data-mode-no-unique-id --ble-controller [bluetooth device number]
              # In this example, the device we want to use is hci1
              $ sudo out/debug/chip-lighting-app-data-mode-no-unique-id --ble-controller 1

    -   Test the device using ChipDeviceController on your laptop / workstation
        etc.

## Running RPC Console

-   As part of building the example with RPCs enabled the chip_rpc python
    interactive console is installed into your venv. The python wheel files are
    also created in the output folder: out/debug/chip_rpc_console_wheels. To
    install the wheel files without rebuilding:
    `pip3 install out/debug/chip_rpc_console_wheels/*.whl`

-   To use the chip-rpc console after it has been installed run:
    `chip-console -s localhost:33000 -o /<YourFolder>/pw_log.out`

-   Then you can Get and Set the light using the RPCs:
    `rpcs.chip.rpc.Lighting.Get()`

    `rpcs.chip.rpc.Lighting.Set(on=True, level=128, color=protos.chip.rpc.LightingColor(hue=5, saturation=5))`

## Device Tracing

Device tracing is available to analyze the device performance. To turn on
tracing, build with RPC enabled. See [Building with RPC enabled](#building).

Obtain tracing json file.

```
    $ ./{PIGWEED_REPO}/pw_trace_tokenized/py/pw_trace_tokenized/get_trace.py -s localhost:33000 \
     -o {OUTPUT_FILE} -t {ELF_FILE} {PIGWEED_REPO}/pw_trace_tokenized/pw_trace_protos/trace_rpc.proto
```

## Trigger event using lighting-app event named pipe

You can send a command to lighting-app to trigger specific event by adding the
--app-pipe argument and providing the path of the file to use `<file_path>`.

### Example to enable named pipes

```
./out/debug/chip-lighting-app-data-mode-no-unique-id --app-pipe /tmp/chip_lighting_fifo
```

### Trigger `SoftwareFault` events

1. Generate event `SoftwareFault` when a software fault takes place on the Node.

```
$ echo '{"Name":"SoftwareFault"}' > /tmp/chip_lighting_fifo
```

### Trigger `HardwareFault` events

1. Generate event `HardwareFaultChange` to indicate a change in the set of
   hardware faults currently detected by the Node.

```
$ echo '{"Name":"HardwareFaultChange"}' > /tmp/chip_lighting_fifo
```

2. Generate event `RadioFaultChange` to indicate a change in the set of radio
   faults currently detected by the Node.

```
$ echo '{"Name":"RadioFaultChange"}' > /tmp/chip_lighting_fifo
```

3. Generate event `NetworkFaultChange` to indicate a change in the set of
   network faults currently detected by the Node.

```
$ echo '{"Name":"NetworkFaultChange"}' > /tmp/chip_lighting_fifo
```

4. Generate event `BootReason` to indicate the reason that caused the device to
   start-up, from the following set of `BootReasons`.

-   `PowerOnReboot` The Node has booted as the result of physical interaction
    with the device resulting in a reboot.

-   `BrownOutReset` The Node has rebooted as the result of a brown-out of the
    Node’s power supply.

-   `SoftwareWatchdogReset` The Node has rebooted as the result of a software
    watchdog timer.

-   `HardwareWatchdogReset` The Node has rebooted as the result of a hardware
    watchdog timer.

-   `SoftwareUpdateCompleted` The Node has rebooted as the result of a completed
    software update.

-   `SoftwareReset` The Node has rebooted as the result of a software initiated
    reboot.

```
$ echo '{"Name":"<BootReason>"}' > /tmp/chip_lighting_fifo
```

### Trigger Switch events

1. Generate event `SwitchLatched`, when the latching switch is moved to a new
   position.

```
$ echo '{"Name":"SwitchLatched","NewPosition":3}' > /tmp/chip_lighting_fifo
```

2. Generate event `InitialPress`, when the momentary switch starts to be
   pressed.

```
$ echo '{"Name":"InitialPress","NewPosition":3}' > /tmp/chip_lighting_fifo
```

3. Generate event `LongPress`, when the momentary switch has been pressed for a
   "long" time.

```
$ echo '{"Name":"LongPress","NewPosition":3}' > /tmp/chip_lighting_fifo
```

4. Generate event `ShortRelease`, when the momentary switch has been released.

```
$ echo '{"Name":"ShortRelease","PreviousPosition":3}' > /tmp/chip_lighting_fifo
```

5. Generate event `LongRelease` when the momentary switch has been released and
   after having been pressed for a long time.

```
$ echo '{"Name":"LongRelease","PreviousPosition":3}' > /tmp/chip_lighting_fifo
```

6. Generate event `MultiPressOngoing` to indicate how many times the momentary
   switch has been pressed in a multi-press sequence, during that sequence.

```
$ echo '{"Name":"MultiPressOngoing","NewPosition":3,"CurrentNumberOfPressesCounted":4}' > /tmp/chip_lighting_fifo
```

7. Generate event `MultiPressComplete` to indicate how many times the momentary
   switch has been pressed in a multi-press sequence, after it has been detected
   that the sequence has ended.

```
$ echo '{"Name":"MultiPressComplete","PreviousPosition":3,"TotalNumberOfPressesCounted":2}' > /tmp/chip_lighting_fifo
```