This directory contains *CMake* files that can be used to build protobuf
with *MSVC* on *Windows*. You can build the project from *Command Prompt*
and using an *Visual Studio* IDE.

You need to have [CMake](http://www.cmake.org), [Visual Studio](https://www.visualstudio.com)
and optionally [Git](http://git-scm.com) installed on your computer before proceeding.

Most of the instructions will be given to the *Сommand Prompt*, but the same
actions can be performed using appropriate GUI tools.

Environment Setup
=================

Open the appropriate *Command Prompt* from the *Start* menu.

For example *VS2013 x64 Native Tools Command Prompt*:

    C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\bin\amd64>

Change to your working directory:

    C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\bin\amd64>cd C:\Path\to
    C:\Path\to>

Where *C:\Path\to* is path to your real working directory.

Create a folder where protobuf headers/libraries/binaries will be installed after built:

    C:\Path\to>mkdir install

If *cmake* command is not available from *Command Prompt*, add it to system *PATH* variable:

    C:\Path\to>set PATH=%PATH%;C:\Program Files (x86)\CMake\bin

If *git* command is not available from *Command Prompt*, add it to system *PATH* variable:

    C:\Path\to>set PATH=%PATH%;C:\Program Files\Git\cmd

Good. Now you are ready to continue.

Getting Sources
===============

You can get the latest stable source packages from the
[releases](https://github.com/google/protobuf/releases) page.
Or you can type:

     C:\Path\to> git clone -b [release_tag] https://github.com/google/protobuf.git

Where *[release_tag]* is a git tag like *v3.0.0-beta-1* or a branch name like *master*
if you want to get the latest code.

Go to the project folder:

     C:\Path\to>cd protobuf
     C:\Path\to\protobuf>

Protobuf unit-tests require gmock to build. If you download protobuf source code
from the *releases* page, the *gmock* directory should already be there. If you checkout
the code via `git clone`, this *gmock* directory won't exist and you will have to
download it manually or skip building protobuf unit-tests.

You can download gmock as follows:

     C:\Path\to\protobuf>git clone -b release-1.7.0 https://github.com/google/googlemock.git gmock

Then go to *gmock* folder and download gtest:

     C:\Path\to\protobuf>cd gmock
     C:\Path\to\protobuf\gmock>git clone -b release-1.7.0 https://github.com/google/googletest.git gtest

If you absolutely don't want to build and run protobuf unit-tests, skip
this steps and use protobuf at your own risk.

Now go to *cmake* folder in protobuf sources:

     C:\Path\to\protobuf\gmock>cd ..\cmake
     C:\Path\to\protobuf\cmake>

Good. Now you are ready to *CMake* configuration.

CMake Configuration
===================

*CMake* supports a lot of different
[generators](http://www.cmake.org/cmake/help/latest/manual/cmake-generators.7.html)
for various native build systems.
We are only interested in
[Makefile](http://www.cmake.org/cmake/help/latest/manual/cmake-generators.7.html#makefile-generators)
and
[Visual Studio](http://www.cmake.org/cmake/help/latest/manual/cmake-generators.7.html#visual-studio-generators)
generators.

We will use shadow building to separate the temporary files from the protobuf source code.

Create a temporary *build* folder and change your working directory to it:

     C:\Path\to\protobuf\cmake>mkdir build & cd build
     C:\Path\to\protobuf\cmake\build>

The *Makefile* generator can build the project in only one configuration, so you need to build
a separate folder for each configuration.

To start using a *Release* configuration:

     C:\Path\to\protobuf\cmake\build>mkdir release & cd release
     C:\Path\to\protobuf\cmake\build\release>cmake -G "NMake Makefiles" ^
     -DCMAKE_BUILD_TYPE=Release ^
     -DCMAKE_INSTALL_PREFIX=../../../../install ^
     ../..

It will generate *nmake* *Makefile* in current directory.

To use *Debug* configuration:

     C:\Path\to\protobuf\cmake\build>mkdir debug & cd debug
     C:\Path\to\protobuf\cmake\build\debug>cmake -G "NMake Makefiles" ^
     -DCMAKE_BUILD_TYPE=Debug ^
     -DCMAKE_INSTALL_PREFIX=../../../../install ^
     ../..

It will generate *nmake* *Makefile* in current directory.

To create *Visual Studio* solution file:

     C:\Path\to\protobuf\cmake\build>mkdir solution & cd solution
     C:\Path\to\protobuf\cmake\build\solution>cmake -G "Visual Studio 12 2013 Win64" ^
     -DCMAKE_INSTALL_PREFIX=../../../../install ^
     ../..

It will generate *Visual Studio* solution file *protobuf.sln* in current directory.

If the *gmock* directory does not exist, and you do not want to build protobuf unit tests,
you need to add *cmake* command argument `-Dprotobuf_BUILD_TESTS=OFF` to disable testing.

Compiling
=========

To compile protobuf:

     C:\Path\to\protobuf\cmake\build\release>nmake

or

     C:\Path\to\protobuf\cmake\build\debug>nmake

And wait for the compilation to finish.

If you prefer to use the IDE:

  * Open the generated protobuf.sln file in Microsoft Visual Studio.
  * Choose "Debug" or "Release" configuration as desired.
  * From the Build menu, choose "Build Solution".

And wait for the compilation to finish.

Testing
=======

To run unit-tests:

     C:\Path\to\protobuf\cmake\build\release>nmake check

or

     C:\Path\to\protobuf\cmake\build\debug>nmake check

You can also build project *check* from Visual Studio solution.
Yes, it may sound strange, but it works.

You should see output similar to:

     Running main() from gmock_main.cc
     [==========] Running 1546 tests from 165 test cases.
     
     ...
     
     [==========] 1546 tests from 165 test cases ran. (2529 ms total)
     [  PASSED  ] 1546 tests.

To run specific tests:

     C:\Path\to\protobuf>cmake\build\release\tests.exe --gtest_filter=AnyTest*
     Running main() from gmock_main.cc
     Note: Google Test filter = AnyTest*
     [==========] Running 3 tests from 1 test case.
     [----------] Global test environment set-up.
     [----------] 3 tests from AnyTest
     [ RUN      ] AnyTest.TestPackAndUnpack
     [       OK ] AnyTest.TestPackAndUnpack (0 ms)
     [ RUN      ] AnyTest.TestPackAndUnpackAny
     [       OK ] AnyTest.TestPackAndUnpackAny (0 ms)
     [ RUN      ] AnyTest.TestIs
     [       OK ] AnyTest.TestIs (0 ms)
     [----------] 3 tests from AnyTest (1 ms total)
     
     [----------] Global test environment tear-down
     [==========] 3 tests from 1 test case ran. (2 ms total)
     [  PASSED  ] 3 tests.

Note that the tests must be run from the source folder.

If all tests are passed, safely continue.

Installing
==========

To install protobuf to the specified *install* folder:

     C:\Path\to\protobuf\cmake\build\release>nmake install

or

     C:\Path\to\protobuf\cmake\build\debug>nmake install

You can also build project *INSTALL* from Visual Studio solution.
It sounds not so strange and it works.

This will create the following folders under the *install* location:
  * bin - that contains protobuf *protoc.exe* compiler;
  * include - that contains C++ headers and protobuf *.proto files;
  * lib - that contains linking libraries and *CMake* configuration files for *protobuf* package.

Now you can if needed:
  * Copy the contents of the include directory to wherever you want to put headers.
  * Copy protoc.exe wherever you put build tools (probably somewhere in your PATH).
  * Copy linking libraries libprotobuf[d].lib, libprotobuf-lite[d].lib, and libprotoc[d].lib wherever you put libraries.

To avoid conflicts between the MSVC debug and release runtime libraries, when
compiling a debug build of your application, you may need to link against a
debug build of libprotobufd.lib with "d" postfix.  Similarly, release builds should link against
release libprotobuf.lib library.

DLLs vs. static linking
=======================

Static linking is now the default for the Protocol Buffer libraries.  Due to
issues with Win32's use of a separate heap for each DLL, as well as binary
compatibility issues between different versions of MSVC's STL library, it is
recommended that you use static linkage only.  However, it is possible to
build libprotobuf and libprotoc as DLLs if you really want.  To do this,
do the following:

  * Add an additional flag `-Dprotobuf_BUILD_SHARED_LIBS=ON` when invoking cmake
  * Follow the same steps as described in the above section.
  * When compiling your project, make sure to `#define PROTOBUF_USE_DLLS`.

When distributing your software to end users, we strongly recommend that you
do NOT install libprotobuf.dll or libprotoc.dll to any shared location.
Instead, keep these libraries next to your binaries, in your application's
own install directory.  C++ makes it very difficult to maintain binary
compatibility between releases, so it is likely that future versions of these
libraries will *not* be usable as drop-in replacements.

If your project is itself a DLL intended for use by third-party software, we
recommend that you do NOT expose protocol buffer objects in your library's
public interface, and that you statically link protocol buffers into your
library.

ZLib support
============

If you want to include GzipInputStream and GzipOutputStream
(google/protobuf/io/gzip_stream.h) in libprotobuf, you will need to do a few
additional steps.

Obtain a copy of the zlib library.  The pre-compiled DLL at zlib.net works.
You need prepare it:

  * Make sure zlib's two headers are in your `C:\Path\to\install\include` path
  * Make sure zlib's linking libraries (*.lib file) is in your
    `C:\Path\to\install\lib` library path.

You can also compile it from source by yourself.

Getting sources:

     C:\Path\to>git clone -b v1.2.8 https://github.com/madler/zlib.git
     C:\Path\to>cd zlib

Compiling and Installing:

     C:\Path\to\zlib>mkdir build & cd build
     C:\Path\to\zlib\build>mkdir release & cd release
     C:\Path\to\zlib\build\release>cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release ^
     -DCMAKE_INSTALL_PREFIX=../../../install ../..
     C:\Path\to\zlib\build\release>nmake & nmake install

You can make *debug* version or use *Visual Studio* generator also as before for the
protobuf project.

Now add *bin* folder from *install* to system *PATH*:

     C:\Path\to>set PATH=%PATH%;C:\Path\to\install\bin

You need reconfigure protobuf with flag `-Dprotobuf_WITH_ZLIB=ON` when invoking cmake.

Note that if you have compiled ZLIB yourself, as stated above,
further disable the option `-Dprotobuf_MSVC_STATIC_RUNTIME=OFF`.

If it reports NOTFOUND for zlib_include or zlib_lib, you might haven't put
the headers or the .lib file in the right directory.

Build and testing protobuf as usual.

Notes on Compiler Warnings
==========================

The following warnings have been disabled while building the protobuf libraries
and compiler.  You may have to disable some of them in your own project as
well, or live with them.

* C4018 - 'expression' : signed/unsigned mismatch
* C4146 - unary minus operator applied to unsigned type, result still unsigned
* C4244 - Conversion from 'type1' to 'type2', possible loss of data.
* C4251 - 'identifier' : class 'type' needs to have dll-interface to be used by
  clients of class 'type2'
* C4267 - Conversion from 'size_t' to 'type', possible loss of data.
* C4305 - 'identifier' : truncation from 'type1' to 'type2'
* C4355 - 'this' : used in base member initializer list
* C4800 - 'type' : forcing value to bool 'true' or 'false' (performance warning)
* C4996 - 'function': was declared deprecated

C4251 is of particular note, if you are compiling the Protocol Buffer library
as a DLL (see previous section).  The protocol buffer library uses templates in
its public interfaces.  MSVC does not provide any reasonable way to export
template classes from a DLL.  However, in practice, it appears that exporting
templates is not necessary anyway.  Since the complete definition of any
template is available in the header files, anyone importing the DLL will just
end up compiling instances of the templates into their own binary.  The
Protocol Buffer implementation does not rely on static template members being
unique, so there should be no problem with this, but MSVC prints warning
nevertheless.  So, we disable it.  Unfortunately, this warning will also be
produced when compiling code which merely uses protocol buffers, meaning you
may have to disable it in your code too.