/*
 * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef _PICO_PLATFORM_H_
#define _PICO_PLATFORM_H_

/** \file platform.h
 *  \defgroup pico_platform pico_platform
 *
 * Macros and definitions (and functions when included by non assembly code) for the RP2 family device / architecture
 * to provide a common abstraction over low level compiler / platform specifics.
 *
 * This header may be included by assembly code
 */

#include "hardware/platform_defs.h"

// Marker for builds targeting the RP2040
#define PICO_RP2040 1

// PICO_CONFIG: PICO_STACK_SIZE, Stack Size, min=0x100, default=0x800, advanced=true, group=pico_platform
#ifndef PICO_STACK_SIZE
#define PICO_STACK_SIZE _u(0x800)
#endif

// PICO_CONFIG: PICO_HEAP_SIZE, Heap size to reserve, min=0x100, default=0x800, advanced=true, group=pico_platform
#ifndef PICO_HEAP_SIZE
#define PICO_HEAP_SIZE _u(0x800)
#endif

// PICO_CONFIG: PICO_NO_RAM_VECTOR_TABLE, Enable/disable the RAM vector table, type=bool, default=0, advanced=true, group=pico_platform
#ifndef PICO_NO_RAM_VECTOR_TABLE
#define PICO_NO_RAM_VECTOR_TABLE 0
#endif

// PICO_CONFIG: PICO_RP2040_B0_SUPPORTED, Whether to include any specific software support for RP2040 B0 revision, type=bool, default=1, advanced=true, group=pico_platform
#ifndef PICO_RP2040_B0_SUPPORTED
#define PICO_RP2040_B0_SUPPORTED 1
#endif

// PICO_CONFIG: PICO_FLOAT_SUPPORT_ROM_V1, Include float support code for RP2040 B0 when that chip revision is supported , type=bool, default=1, advanced=true, group=pico_platform
#ifndef PICO_FLOAT_SUPPORT_ROM_V1
#define PICO_FLOAT_SUPPORT_ROM_V1 1
#endif

// PICO_CONFIG: PICO_DOUBLE_SUPPORT_ROM_V1, Include double support code for RP2040 B0 when that chip revision is supported , type=bool, default=1, advanced=true, group=pico_platform
#ifndef PICO_DOUBLE_SUPPORT_ROM_V1
#define PICO_DOUBLE_SUPPORT_ROM_V1 1
#endif


// PICO_CONFIG: PICO_RP2040_B1_SUPPORTED, Whether to include any specific software support for RP2040 B1 revision, type=bool, default=1, advanced=true, group=pico_platform
#ifndef PICO_RP2040_B1_SUPPORTED
#define PICO_RP2040_B1_SUPPORTED 1
#endif

// PICO_CONFIG: PICO_RP2040_B2_SUPPORTED, Whether to include any specific software support for RP2040 B2 revision, type=bool, default=1, advanced=true, group=pico_platform
#ifndef PICO_RP2040_B2_SUPPORTED
#define PICO_RP2040_B2_SUPPORTED 1
#endif

// --- remainder of file is not included by assembly code ---

#ifndef __ASSEMBLER__

#include <sys/cdefs.h>
#include "pico/types.h"

#ifdef __cplusplus
extern "C" {
#endif

/*! \brief Marker for an interrupt handler
 *  \ingroup pico_platform
 * For example an IRQ handler function called my_interrupt_handler:
 *
 *     void __isr my_interrupt_handler(void) {
 */
#define __isr

/*! \brief Section attribute macro for placement in RAM after the `.data` section
 *  \ingroup pico_platform
 *
 * For example a 400 element `uint32_t` array placed after the .data section
 *
 *     uint32_t __after_data("my_group_name") a_big_array[400];
 *
 * The section attribute is `.after_data.<group>`
 *
 * \param group a string suffix to use in the section name to distinguish groups that can be linker
 *              garbage-collected independently
 */
#define __after_data(group) __attribute__((section(".after_data." group)))

/*! \brief Section attribute macro for placement not in flash (i.e in RAM)
 *  \ingroup pico_platform
 *
 * For example a 3 element `uint32_t` array placed in RAM (even though it is `static const`)
 *
 *     static const uint32_t __not_in_flash("my_group_name") an_array[3];
 *
 * The section attribute is `.time_critical.<group>`
 *
 * \param group a string suffix to use in the section name to distinguish groups that can be linker
 *              garbage-collected independently
 */
#define __not_in_flash(group) __attribute__((section(".time_critical." group)))

/*! \brief Section attribute macro for placement in the SRAM bank 4 (known as "scratch X")
 *  \ingroup pico_platform
 *
 * Scratch X is commonly used for critical data and functions accessed only by one core (when only
 * one core is accessing the RAM bank, there is no opportunity for stalls)
 *
 * For example a `uint32_t` variable placed in "scratch X"
 *
 *     uint32_t __scratch_x("my_group_name") foo = 23;
 *
 * The section attribute is `.scratch_x.<group>`
 *
 * \param group a string suffix to use in the section name to distinguish groups that can be linker
 *              garbage-collected independently
 */
#define __scratch_x(group) __attribute__((section(".scratch_x." group)))

/*! \brief Section attribute macro for placement in the SRAM bank 5 (known as "scratch Y")
 *  \ingroup pico_platform
 *
 * Scratch Y is commonly used for critical data and functions accessed only by one core (when only
 * one core is accessing the RAM bank, there is no opportunity for stalls)
 *
 * For example a `uint32_t` variable placed in "scratch Y"
 *
 *     uint32_t __scratch_y("my_group_name") foo = 23;
 *
 * The section attribute is `.scratch_y.<group>`
 *
 * \param group a string suffix to use in the section name to distinguish groups that can be linker
 *              garbage-collected independently
 */
#define __scratch_y(group) __attribute__((section(".scratch_y." group)))

/*! \brief Section attribute macro for data that is to be left uninitialized
 *  \ingroup pico_platform
 *
 * Data marked this way will retain its value across a reset (normally uninitialized data - in the .bss
 * section) is initialized to zero during runtime initialization
 *
 * For example a `uint32_t` foo that will retain its value if the program is restarted by reset.
 *
 *     uint32_t __uninitialized_ram("my_group_name") foo;
 *
 * The section attribute is `.uninitialized_ram.<group>`
 *
 * \param group a string suffix to use in the section name to distinguish groups that can be linker
 *              garbage-collected independently
 */
#define __uninitialized_ram(group) __attribute__((section(".uninitialized_ram." #group))) group

/*! \brief Section attribute macro for placement in flash even in a COPY_TO_RAM binary
 *  \ingroup pico_platform
 *
 * For example a `uint32_t` variable explicitly placed in flash (it will hard fault if you attempt to write it!)
 *
 *     uint32_t __in_flash("my_group_name") foo = 23;
 *
 * The section attribute is `.flashdata.<group>`
 *
 * \param group a string suffix to use in the section name to distinguish groups that can be linker
 *              garbage-collected independently
 */
#define __in_flash(group) __attribute__((section(".flashdata" group)))

/*! \brief Indicates a function should not be stored in flash
 *  \ingroup pico_platform
 *
 * Decorates a function name, such that the function will execute from RAM (assuming it is not inlined
 * into a flash function by the compiler)
 *
 * For example a function called my_func taking an int parameter:
 *
 *     void __not_in_flash_func(my_func)(int some_arg) {
 *
 * The function is placed in the `.time_critical.<func_name>` linker section
 *
 * \see __no_inline_not_in_flash_func
 */
#define __not_in_flash_func(func_name) __not_in_flash(__STRING(func_name)) func_name

/*! \brief Indicates a function is time/latency critical and should not run from flash
 *  \ingroup pico_platform
 *
 * Decorates a function name, such that the function will execute from RAM (assuming it is not inlined
 * into a flash function by the compiler) to avoid possible flash latency. Currently this macro is identical
 * in implementation to `__not_in_flash_func`, however the semantics are distinct and a `__time_critical_func`
 * may in the future be treated more specially to reduce the overhead when calling such function from a flash
 * function.
 *
 * For example a function called my_func taking an int parameter:
 *
 *     void __time_critical(my_func)(int some_arg) {
 *
 * The function is placed in the `.time_critical.<func_name>` linker section
 *
 * \see __not_in_flash_func
 */
#define __time_critical_func(func_name) __not_in_flash_func(func_name)

/*! \brief Indicate a function should not be stored in flash and should not be inlined
 *  \ingroup pico_platform
 *
 * Decorates a function name, such that the function will execute from RAM, explicitly marking it as
 * noinline to prevent it being inlined into a flash function by the compiler
 *
 * For example a function called my_func taking an int parameter:
 *
 *     void __no_inline_not_in_flash_func(my_func)(int some_arg) {
 *
 * The function is placed in the `.time_critical.<func_name>` linker section
 */
#define __no_inline_not_in_flash_func(func_name) __noinline __not_in_flash_func(func_name)

#define __packed_aligned __packed __aligned(4)

/*! \brief Attribute to force inlining of a function regardless of optimization level
 *  \ingroup pico_platform
 *
 *  For example my_function here will always be inlined:
 *
 *      int __force_inline my_function(int x) {
 *
 */
#if defined(__GNUC__) && __GNUC__ <= 7
#define __force_inline inline __always_inline
#else
#define __force_inline __always_inline
#endif

/*! \brief Macro to determine the number of elements in an array
 *  \ingroup pico_platform
 */
#ifndef count_of
#define count_of(a) (sizeof(a)/sizeof((a)[0]))
#endif

/*! \brief Macro to return the maximum of two comparable values
 *  \ingroup pico_platform
 */
#ifndef MAX
#define MAX(a, b) ((a)>(b)?(a):(b))
#endif

/*! \brief Macro to return the minimum of two comparable values
 *  \ingroup pico_platform
 */
#ifndef MIN
#define MIN(a, b) ((b)>(a)?(a):(b))
#endif

/*! \brief Execute a breakpoint instruction
 *  \ingroup pico_platform
 */
static inline void __breakpoint(void) {
    __asm__("bkpt #0");
}

/*! \brief Ensure that the compiler does not move memory access across this method call
 *  \ingroup pico_platform
 *
 *  For example in the following code:
 *
 *      *some_memory_location = var_a;
 *      __compiler_memory_barrier();
 *      uint32_t var_b = *some_other_memory_location
 *
 * The compiler will not move the load from `some_other_memory_location` above the memory barrier (which it otherwise
 * might - even above the memory store!)
 */
__force_inline static void __compiler_memory_barrier(void) {
    __asm__ volatile ("" : : : "memory");
}

/*! \brief Macro for converting memory addresses to 32 bit addresses suitable for DMA
 *  \ingroup pico_platform
 *
 *  This is just a cast to `uintptr_t` on the RP2040, however you may want to use this when developing code
 *  that also runs in "host" mode. If the host mode is 64 bit and you are embedding data pointers
 *  in other data (e.g. DMA chaining), then there is a need in "host" mode to convert a 64 bit native
 *  pointer to a 32 bit value for storage, which can be done using this macro.
 */
#define host_safe_hw_ptr(x) ((uintptr_t)(x))
#define native_safe_hw_ptr(x) host_safe_hw_ptr(x)


/*! \brief Panics with the message "Unsupported"
 *  \ingroup pico_platform
 *  \see panic
 */
void __attribute__((noreturn)) panic_unsupported(void);

/*! \brief Displays a panic message and halts execution
 *  \ingroup pico_platform
 *
 * An attempt is made to output the message to all registered STDOUT drivers
 * after which this method executes a BKPT instruction.
 *
 * @param fmt format string (printf-like)
 * @param ...  printf-like arguments
 */
void __attribute__((noreturn)) panic(const char *fmt, ...);

// PICO_CONFIG: PICO_NO_FPGA_CHECK, Remove the FPGA platform check for small code size reduction, type=bool, default=0, advanced=true, group=pico_runtime
#ifndef PICO_NO_FPGA_CHECK
#define PICO_NO_FPGA_CHECK 0
#endif

#if PICO_NO_FPGA_CHECK
static inline bool running_on_fpga(void) {return false;}
#else
bool running_on_fpga(void);
#endif

/*! \brief Returns the RP2040 chip revision number
 *  \ingroup pico_platform
 * @return the RP2040 chip revision number (1 for B0/B1, 2 for B2)
 */
uint8_t rp2040_chip_version(void);

/*! \brief Returns the RP2040 rom version number
 *  \ingroup pico_platform
 * @return the RP2040 rom version number (1 for RP2040-B0, 2 for RP2040-B1, 3 for RP2040-B2)
 */
static inline uint8_t rp2040_rom_version(void) {
    return *(uint8_t*)0x13;
}

/*! \brief No-op function for the body of tight loops
 *  \ingroup pico_platform
 *
 * Np-op function intended to be called by any tight hardware polling loop. Using this ubiquitously
 * makes it much easier to find tight loops, but also in the future \#ifdef-ed support for lockup
 * debugging might be added
 */
static __force_inline void tight_loop_contents(void) {}

/*! \brief Multiply two integers using an assembly `MUL` instruction
 *  \ingroup pico_platform
 *
 * This multiplies a by b using multiply instruction using the ARM mul instruction regardless of values (the compiler
 * might otherwise choose to perform shifts/adds), i.e. this is a 1 cycle operation.
 *
 * \param a the first operand
 * \param b the second operand
 * \return a * b
 */
__force_inline static int32_t __mul_instruction(int32_t a, int32_t b) {
    asm ("mul %0, %1" : "+l" (a) : "l" (b) : );
    return a;
}

/*! \brief multiply two integer values using the fastest method possible
 *  \ingroup pico_platform
 *
 * Efficiently multiplies value a by possibly constant value b.
 *
 * If b is known to be constant and not zero or a power of 2, then a mul instruction is used rather than gcc's default
 * which is often a slow combination of shifts and adds. If b is a power of 2 then a single shift is of course preferable
 * and will be used
 *
 * \param a the first operand
 * \param b the second operand
 * \return a * b
 */
#define __fast_mul(a, b) __builtin_choose_expr(__builtin_constant_p(b) && !__builtin_constant_p(a), \
(__builtin_popcount(b) >= 2 ? __mul_instruction(a,b) : (a)*(b)), \
(a)*(b))

/*! \brief Utility macro to assert two types are equivalent.
 *  \ingroup pico_platform
 *
 *  This macro can be useful in other macros along with `typeof` to assert that two parameters are of equivalent type
 *  (or that a single parameter is of an expected type)
 */
#define __check_type_compatible(type_a, type_b) static_assert(__builtin_types_compatible_p(type_a, type_b), __STRING(type_a) " is not compatible with " __STRING(type_b));

/*! \brief Get the current exception level on this core
 *  \ingroup pico_platform
 *
 * \return the exception number if the CPU is handling an exception, or 0 otherwise
 */
uint __get_current_exception(void);

#define WRAPPER_FUNC(x) __wrap_ ## x
#define REAL_FUNC(x) __real_ ## x

#ifdef __cplusplus
}
#endif

#else // __ASSEMBLER__

#define WRAPPER_FUNC_NAME(x) __wrap_##x
#define SECTION_NAME(x) .text.##x
#define RAM_SECTION_NAME(x) .time_critical.##x

#endif // !__ASSEMBLER__

#endif