| // THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT |
| |
| /** |
| * Copyright (c) 2024 Raspberry Pi Ltd. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| // ============================================================================= |
| // Register block : USB_DEVICE_DPRAM |
| // Version : 1 |
| // Bus type : ahbl |
| // Description : DPRAM layout for USB device. |
| // ============================================================================= |
| #ifndef _HARDWARE_REGS_USB_DEVICE_DPRAM_H |
| #define _HARDWARE_REGS_USB_DEVICE_DPRAM_H |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_SETUP_PACKET_LOW |
| // Description : Bytes 0-3 of the SETUP packet from the host. |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_OFFSET _u(0x00000000) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BITS _u(0xffffffff) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_BITS _u(0xffff0000) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_LSB _u(16) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_RESET _u(0x00) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_BITS _u(0x0000ff00) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_MSB _u(15) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_LSB _u(8) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_RESET _u(0x00) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_BITS _u(0x000000ff) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_MSB _u(7) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_LSB _u(0) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_SETUP_PACKET_HIGH |
| // Description : Bytes 4-7 of the setup packet from the host. |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_OFFSET _u(0x00000004) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_BITS _u(0xffffffff) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_BITS _u(0xffff0000) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_MSB _u(31) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_LSB _u(16) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_MSB _u(15) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_LSB _u(0) |
| #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP1_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_OFFSET _u(0x00000008) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP1_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_OFFSET _u(0x0000000c) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP2_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_OFFSET _u(0x00000010) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP2_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_OFFSET _u(0x00000014) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP3_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_OFFSET _u(0x00000018) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP3_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_OFFSET _u(0x0000001c) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP4_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_OFFSET _u(0x00000020) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP4_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_OFFSET _u(0x00000024) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP5_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_OFFSET _u(0x00000028) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP5_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_OFFSET _u(0x0000002c) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP6_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_OFFSET _u(0x00000030) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP6_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_OFFSET _u(0x00000034) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP7_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_OFFSET _u(0x00000038) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP7_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_OFFSET _u(0x0000003c) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP8_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_OFFSET _u(0x00000040) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP8_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_OFFSET _u(0x00000044) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP9_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_OFFSET _u(0x00000048) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP9_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_OFFSET _u(0x0000004c) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP10_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_OFFSET _u(0x00000050) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP10_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_OFFSET _u(0x00000054) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP11_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_OFFSET _u(0x00000058) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP11_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_OFFSET _u(0x0000005c) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP12_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_OFFSET _u(0x00000060) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP12_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_OFFSET _u(0x00000064) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP13_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_OFFSET _u(0x00000068) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP13_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_OFFSET _u(0x0000006c) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP14_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_OFFSET _u(0x00000070) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP14_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_OFFSET _u(0x00000074) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP15_IN_CONTROL |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_OFFSET _u(0x00000078) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP15_OUT_CONTROL |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_OFFSET _u(0x0000007c) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BITS _u(0xfc03ffff) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE |
| // Description : Enable this endpoint. The device will not reply to any packets |
| // for this endpoint if this bit is not set. |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENABLE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED |
| // Description : This endpoint is double buffered. |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_DOUBLE_BUFFERED_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF |
| // Description : Trigger an interrupt each time a buffer is done. |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF |
| // Description : Trigger an interrupt each time both buffers are done. Only |
| // valid in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_BITS _u(0x10000000) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_LSB _u(28) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE |
| // 0x0 -> Control |
| // 0x1 -> Isochronous |
| // 0x2 -> Bulk |
| // 0x3 -> Interrupt |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL |
| // Description : Trigger an interrupt if a STALL is sent. Intended for debug |
| // only. |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL_BITS _u(0x00020000) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL_MSB _u(17) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL_LSB _u(17) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK |
| // Description : Trigger an interrupt if a NAK is sent. Intended for debug only. |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK_BITS _u(0x00010000) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK_MSB _u(16) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_NAK_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS |
| // Description : 64 byte aligned buffer address for this EP (bits 0-5 are |
| // ignored). Relative to the start of the DPRAM. |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS_RESET _u(0x0000) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS_BITS _u(0x0000ffff) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL |
| // Description : Buffer control for both buffers of an endpoint. Fields ending |
| // in a _1 are for buffer 1. |
| // Fields ending in a _0 are for buffer 0. Buffer 1 controls are |
| // only valid if the endpoint is in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_OFFSET _u(0x00000080) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_BITS _u(0xffffffff) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1 |
| // Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit |
| // is set to indicate the data is valid. For an OUT transfer (RX |
| // from the host) this bit should be left as a 0. The host will |
| // set it when it has filled the buffer with data. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1 |
| // Description : Buffer 1 is the last buffer of the transfer. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1 |
| // Description : The data pid of buffer 1. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET |
| // Description : The number of bytes buffer 1 is offset from buffer 0 in |
| // Isochronous mode. Only valid in double buffered mode for an |
| // Isochronous endpoint. |
| // For a non Isochronous endpoint the offset is always 64 bytes. |
| // 0x0 -> 128 |
| // 0x1 -> 256 |
| // 0x2 -> 512 |
| // 0x3 -> 1024 |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1 |
| // Description : Buffer 1 is available. This bit is set to indicate the buffer |
| // can be used by the controller. The controller clears the |
| // available bit when writing the status back. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1 |
| // Description : The length of the data in buffer 1. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0 |
| // Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit |
| // is set to indicate the data is valid. For an OUT transfer (RX |
| // from the host) this bit should be left as a 0. The host will |
| // set it when it has filled the buffer with data. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0 |
| // Description : Buffer 0 is the last buffer of the transfer. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0 |
| // Description : The data pid of buffer 0. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0_MSB _u(13) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0_LSB _u(13) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET |
| // Description : Reset the buffer selector to buffer 0. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET_MSB _u(12) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET_LSB _u(12) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_RESET_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL |
| // Description : Reply with a stall (valid for both buffers). |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL_MSB _u(11) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL_LSB _u(11) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0 |
| // Description : Buffer 0 is available. This bit is set to indicate the buffer |
| // can be used by the controller. The controller clears the |
| // available bit when writing the status back. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0 |
| // Description : The length of the data in buffer 0. |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL |
| // Description : Buffer control for both buffers of an endpoint. Fields ending |
| // in a _1 are for buffer 1. |
| // Fields ending in a _0 are for buffer 0. Buffer 1 controls are |
| // only valid if the endpoint is in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_OFFSET _u(0x00000084) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1 |
| // Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit |
| // is set to indicate the data is valid. For an OUT transfer (RX |
| // from the host) this bit should be left as a 0. The host will |
| // set it when it has filled the buffer with data. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1 |
| // Description : Buffer 1 is the last buffer of the transfer. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1 |
| // Description : The data pid of buffer 1. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET |
| // Description : The number of bytes buffer 1 is offset from buffer 0 in |
| // Isochronous mode. Only valid in double buffered mode for an |
| // Isochronous endpoint. |
| // For a non Isochronous endpoint the offset is always 64 bytes. |
| // 0x0 -> 128 |
| // 0x1 -> 256 |
| // 0x2 -> 512 |
| // 0x3 -> 1024 |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1 |
| // Description : Buffer 1 is available. This bit is set to indicate the buffer |
| // can be used by the controller. The controller clears the |
| // available bit when writing the status back. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1 |
| // Description : The length of the data in buffer 1. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0 |
| // Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit |
| // is set to indicate the data is valid. For an OUT transfer (RX |
| // from the host) this bit should be left as a 0. The host will |
| // set it when it has filled the buffer with data. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0 |
| // Description : Buffer 0 is the last buffer of the transfer. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0 |
| // Description : The data pid of buffer 0. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET |
| // Description : Reset the buffer selector to buffer 0. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET_MSB _u(12) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET_LSB _u(12) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL |
| // Description : Reply with a stall (valid for both buffers). |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL_MSB _u(11) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL_LSB _u(11) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0 |
| // Description : Buffer 0 is available. This bit is set to indicate the buffer |
| // can be used by the controller. The controller clears the |
| // available bit when writing the status back. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0 |
| // Description : The length of the data in buffer 0. |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL |
| // Description : Buffer control for both buffers of an endpoint. Fields ending |
| // in a _1 are for buffer 1. |
| // Fields ending in a _0 are for buffer 0. Buffer 1 controls are |
| // only valid if the endpoint is in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_OFFSET _u(0x00000088) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_BITS _u(0xffffffff) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1 |
| // Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit |
| // is set to indicate the data is valid. For an OUT transfer (RX |
| // from the host) this bit should be left as a 0. The host will |
| // set it when it has filled the buffer with data. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1 |
| // Description : Buffer 1 is the last buffer of the transfer. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1 |
| // Description : The data pid of buffer 1. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET |
| // Description : The number of bytes buffer 1 is offset from buffer 0 in |
| // Isochronous mode. Only valid in double buffered mode for an |
| // Isochronous endpoint. |
| // For a non Isochronous endpoint the offset is always 64 bytes. |
| // 0x0 -> 128 |
| // 0x1 -> 256 |
| // 0x2 -> 512 |
| // 0x3 -> 1024 |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1 |
| // Description : Buffer 1 is available. This bit is set to indicate the buffer |
| // can be used by the controller. The controller clears the |
| // available bit when writing the status back. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1 |
| // Description : The length of the data in buffer 1. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0 |
| // Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit |
| // is set to indicate the data is valid. For an OUT transfer (RX |
| // from the host) this bit should be left as a 0. The host will |
| // set it when it has filled the buffer with data. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0 |
| // Description : Buffer 0 is the last buffer of the transfer. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0 |
| // Description : The data pid of buffer 0. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0_MSB _u(13) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0_LSB _u(13) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET |
| // Description : Reset the buffer selector to buffer 0. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET_MSB _u(12) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET_LSB _u(12) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_RESET_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL |
| // Description : Reply with a stall (valid for both buffers). |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL_MSB _u(11) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL_LSB _u(11) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0 |
| // Description : Buffer 0 is available. This bit is set to indicate the buffer |
| // can be used by the controller. The controller clears the |
| // available bit when writing the status back. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0 |
| // Description : The length of the data in buffer 0. |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL |
| // Description : Buffer control for both buffers of an endpoint. Fields ending |
| // in a _1 are for buffer 1. |
| // Fields ending in a _0 are for buffer 0. Buffer 1 controls are |
| // only valid if the endpoint is in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_OFFSET _u(0x0000008c) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_BITS _u(0xffffffff) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1 |
| // Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit |
| // is set to indicate the data is valid. For an OUT transfer (RX |
| // from the host) this bit should be left as a 0. The host will |
| // set it when it has filled the buffer with data. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1 |
| // Description : Buffer 1 is the last buffer of the transfer. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1 |
| // Description : The data pid of buffer 1. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET |
| // Description : The number of bytes buffer 1 is offset from buffer 0 in |
| // Isochronous mode. Only valid in double buffered mode for an |
| // Isochronous endpoint. |
| // For a non Isochronous endpoint the offset is always 64 bytes. |
| // 0x0 -> 128 |
| // 0x1 -> 256 |
| // 0x2 -> 512 |
| // 0x3 -> 1024 |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1 |
| // Description : Buffer 1 is available. This bit is set to indicate the buffer |
| // can be used by the controller. The controller clears the |
| // available bit when writing the status back. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1 |
| // Description : The length of the data in buffer 1. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1_MSB _u(25) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0 |
| // Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit |
| // is set to indicate the data is valid. For an OUT transfer (RX |
| // from the host) this bit should be left as a 0. The host will |
| // set it when it has filled the buffer with data. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0_LSB _u(15) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_FULL_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0 |
| // Description : Buffer 0 is the last buffer of the transfer. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0_MSB _u(14) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0_LSB _u(14) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LAST_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0 |
| // Description : The data pid of buffer 0. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0_MSB _u(13) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0_LSB _u(13) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET |
| // Description : Reset the buffer selector to buffer 0. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET_BITS _u(0x00001000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET_MSB _u(12) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET_LSB _u(12) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_RESET_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL |
| // Description : Reply with a stall (valid for both buffers). |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL_BITS _u(0x00000800) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL_MSB _u(11) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL_LSB _u(11) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0 |
| // Description : Buffer 0 is available. This bit is set to indicate the buffer |
| // can be used by the controller. The controller clears the |
| // available bit when writing the status back. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_BITS _u(0x00000400) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_MSB _u(10) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_LSB _u(10) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0 |
| // Description : The length of the data in buffer 0. |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) |
| #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" |
| // ============================================================================= |
| // Register : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL |
| // Description : Buffer control for both buffers of an endpoint. Fields ending |
| // in a _1 are for buffer 1. |
| // Fields ending in a _0 are for buffer 0. Buffer 1 controls are |
| // only valid if the endpoint is in double buffered mode. |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_OFFSET _u(0x00000090) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_BITS _u(0xffffffff) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1 |
| // Description : Buffer 1 is full. For an IN transfer (TX to the host) the bit |
| // is set to indicate the data is valid. For an OUT transfer (RX |
| // from the host) this bit should be left as a 0. The host will |
| // set it when it has filled the buffer with data. |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1_BITS _u(0x80000000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1_MSB _u(31) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1_LSB _u(31) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1 |
| // Description : Buffer 1 is the last buffer of the transfer. |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1_BITS _u(0x40000000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1_MSB _u(30) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1_LSB _u(30) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1 |
| // Description : The data pid of buffer 1. |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1_BITS _u(0x20000000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1_MSB _u(29) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1_LSB _u(29) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET |
| // Description : The number of bytes buffer 1 is offset from buffer 0 in |
| // Isochronous mode. Only valid in double buffered mode for an |
| // Isochronous endpoint. |
| // For a non Isochronous endpoint the offset is always 64 bytes. |
| // 0x0 -> 128 |
| // 0x1 -> 256 |
| // 0x2 -> 512 |
| // 0x3 -> 1024 |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1 |
| // Description : Buffer 1 is available. This bit is set to indicate the buffer |
| // can be used by the controller. The controller clears the |
| // available bit when writing the status back. |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1_BITS _u(0x04000000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1_MSB _u(26) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1_LSB _u(26) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1 |
| // Description : The length of the data in buffer 1. |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1_RESET _u(0x000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1_BITS _u(0x03ff0000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1_MSB _u(25) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1_LSB _u(16) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_1_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0 |
| // Description : Buffer 0 is full. For an IN transfer (TX to the host) the bit |
| // is set to indicate the data is valid. For an OUT transfer (RX |
| // from the host) this bit should be left as a 0. The host will |
| // set it when it has filled the buffer with data. |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0_BITS _u(0x00008000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0_MSB _u(15) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0_LSB _u(15) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_FULL_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0 |
| // Description : Buffer 0 is the last buffer of the transfer. |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0_BITS _u(0x00004000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0_MSB _u(14) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0_LSB _u(14) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LAST_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0 |
| // Description : The data pid of buffer 0. |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0_BITS _u(0x00002000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0_MSB _u(13) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0_LSB _u(13) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_PID_0_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET |
| // Description : Reset the buffer selector to buffer 0. |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET_BITS _u(0x00001000) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET_MSB _u(12) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET_LSB _u(12) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_RESET_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL |
| // Description : Reply with a stall (valid for both buffers). |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL_RESET _u(0x0) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL_BITS _u(0x00000800) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL_MSB _u(11) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL_LSB _u(11) |
| #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_STALL_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_0 |
|