| // THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT |
| |
| /** |
| * Copyright (c) 2024 Raspberry Pi Ltd. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #ifndef _HARDWARE_STRUCTS_INTERP_H |
| #define _HARDWARE_STRUCTS_INTERP_H |
| |
| /** |
| * \file rp2040/interp.h |
| */ |
| |
| #include "hardware/address_mapped.h" |
| #include "hardware/regs/sio.h" |
| |
| // Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_sio |
| // |
| // The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) |
| // _REG_(x) will link to the corresponding register in hardware/regs/sio.h. |
| // |
| // Bit-field descriptions are of the form: |
| // BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION |
| |
| typedef struct { |
| // (Description copied from array index 0 register SIO_INTERP0_ACCUM0 applies similarly to other array indexes) |
| _REG_(SIO_INTERP0_ACCUM0_OFFSET) // SIO_INTERP0_ACCUM0 |
| // Read/write access to accumulator 0 |
| // 0xffffffff [31:0] INTERP0_ACCUM0 (0x00000000) |
| io_rw_32 accum[2]; |
| |
| // (Description copied from array index 0 register SIO_INTERP0_BASE0 applies similarly to other array indexes) |
| _REG_(SIO_INTERP0_BASE0_OFFSET) // SIO_INTERP0_BASE0 |
| // Read/write access to BASE0 register |
| // 0xffffffff [31:0] INTERP0_BASE0 (0x00000000) |
| io_rw_32 base[3]; |
| |
| // (Description copied from array index 0 register SIO_INTERP0_POP_LANE0 applies similarly to other array indexes) |
| _REG_(SIO_INTERP0_POP_LANE0_OFFSET) // SIO_INTERP0_POP_LANE0 |
| // Read LANE0 result, and simultaneously write lane results to both accumulators (POP) |
| // 0xffffffff [31:0] INTERP0_POP_LANE0 (0x00000000) |
| io_ro_32 pop[3]; |
| |
| // (Description copied from array index 0 register SIO_INTERP0_PEEK_LANE0 applies similarly to other array indexes) |
| _REG_(SIO_INTERP0_PEEK_LANE0_OFFSET) // SIO_INTERP0_PEEK_LANE0 |
| // Read LANE0 result, without altering any internal state (PEEK) |
| // 0xffffffff [31:0] INTERP0_PEEK_LANE0 (0x00000000) |
| io_ro_32 peek[3]; |
| |
| // (Description copied from array index 0 register SIO_INTERP0_CTRL_LANE0 applies similarly to other array indexes) |
| _REG_(SIO_INTERP0_CTRL_LANE0_OFFSET) // SIO_INTERP0_CTRL_LANE0 |
| // Control register for lane 0 |
| // 0x02000000 [25] OVERF (0) Set if either OVERF0 or OVERF1 is set |
| // 0x01000000 [24] OVERF1 (0) Indicates if any masked-off MSBs in ACCUM1 are set |
| // 0x00800000 [23] OVERF0 (0) Indicates if any masked-off MSBs in ACCUM0 are set |
| // 0x00200000 [21] BLEND (0) Only present on INTERP0 on each core |
| // 0x00180000 [20:19] FORCE_MSB (0x0) ORed into bits 29:28 of the lane result presented to the... |
| // 0x00040000 [18] ADD_RAW (0) If 1, mask + shift is bypassed for LANE0 result |
| // 0x00020000 [17] CROSS_RESULT (0) If 1, feed the opposite lane's result into this lane's... |
| // 0x00010000 [16] CROSS_INPUT (0) If 1, feed the opposite lane's accumulator into this... |
| // 0x00008000 [15] SIGNED (0) If SIGNED is set, the shifted and masked accumulator... |
| // 0x00007c00 [14:10] MASK_MSB (0x00) The most-significant bit allowed to pass by the mask... |
| // 0x000003e0 [9:5] MASK_LSB (0x00) The least-significant bit allowed to pass by the mask (inclusive) |
| // 0x0000001f [4:0] SHIFT (0x00) Logical right-shift applied to accumulator before masking |
| io_rw_32 ctrl[2]; |
| |
| // (Description copied from array index 0 register SIO_INTERP0_ACCUM0_ADD applies similarly to other array indexes) |
| _REG_(SIO_INTERP0_ACCUM0_ADD_OFFSET) // SIO_INTERP0_ACCUM0_ADD |
| // Values written here are atomically added to ACCUM0 |
| // 0x00ffffff [23:0] INTERP0_ACCUM0_ADD (0x000000) |
| io_rw_32 add_raw[2]; |
| |
| _REG_(SIO_INTERP0_BASE_1AND0_OFFSET) // SIO_INTERP0_BASE_1AND0 |
| // On write, the lower 16 bits go to BASE0, upper bits to BASE1 simultaneously. |
| // 0xffffffff [31:0] INTERP0_BASE_1AND0 (0x00000000) |
| io_wo_32 base01; |
| } interp_hw_t; |
| |
| #define interp_hw_array ((interp_hw_t *)(SIO_BASE + SIO_INTERP0_ACCUM0_OFFSET)) |
| static_assert(sizeof (interp_hw_t) == 0x0040, ""); |
| #define interp0_hw (&interp_hw_array[0]) |
| #define interp1_hw (&interp_hw_array[1]) |
| |
| #endif // _HARDWARE_STRUCTS_INTERP_H |
| |