| // THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT |
| |
| /** |
| * Copyright (c) 2024 Raspberry Pi Ltd. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #ifndef _HARDWARE_STRUCTS_PADS_BANK0_H |
| #define _HARDWARE_STRUCTS_PADS_BANK0_H |
| |
| /** |
| * \file rp2040/pads_bank0.h |
| */ |
| |
| #include "hardware/address_mapped.h" |
| #include "hardware/regs/pads_bank0.h" |
| |
| // Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_pads_bank0 |
| // |
| // The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) |
| // _REG_(x) will link to the corresponding register in hardware/regs/pads_bank0.h. |
| // |
| // Bit-field descriptions are of the form: |
| // BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION |
| |
| typedef struct { |
| _REG_(PADS_BANK0_VOLTAGE_SELECT_OFFSET) // PADS_BANK0_VOLTAGE_SELECT |
| // Voltage select |
| // 0x00000001 [0] VOLTAGE_SELECT (0) |
| io_rw_32 voltage_select; |
| |
| // (Description copied from array index 0 register PADS_BANK0_GPIO0 applies similarly to other array indexes) |
| _REG_(PADS_BANK0_GPIO0_OFFSET) // PADS_BANK0_GPIO0 |
| // Pad control register |
| // 0x00000080 [7] OD (0) Output disable |
| // 0x00000040 [6] IE (1) Input enable |
| // 0x00000030 [5:4] DRIVE (0x1) Drive strength |
| // 0x00000008 [3] PUE (0) Pull up enable |
| // 0x00000004 [2] PDE (1) Pull down enable |
| // 0x00000002 [1] SCHMITT (1) Enable schmitt trigger |
| // 0x00000001 [0] SLEWFAST (0) Slew rate control |
| io_rw_32 io[30]; |
| } pads_bank0_hw_t; |
| |
| #define pads_bank0_hw ((pads_bank0_hw_t *)PADS_BANK0_BASE) |
| static_assert(sizeof (pads_bank0_hw_t) == 0x007c, ""); |
| |
| #endif // _HARDWARE_STRUCTS_PADS_BANK0_H |
| |
