| // THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT |
| |
| /** |
| * Copyright (c) 2024 Raspberry Pi Ltd. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| // ============================================================================= |
| // Register block : IO_QSPI |
| // Version : 1 |
| // Bus type : apb |
| // ============================================================================= |
| #ifndef _HARDWARE_REGS_IO_QSPI_H |
| #define _HARDWARE_REGS_IO_QSPI_H |
| // ============================================================================= |
| // Register : IO_QSPI_USBPHY_DP_STATUS |
| #define IO_QSPI_USBPHY_DP_STATUS_OFFSET _u(0x00000000) |
| #define IO_QSPI_USBPHY_DP_STATUS_BITS _u(0x04022200) |
| #define IO_QSPI_USBPHY_DP_STATUS_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DP_STATUS_IRQTOPROC |
| // Description : interrupt to processors, after override is applied |
| #define IO_QSPI_USBPHY_DP_STATUS_IRQTOPROC_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DP_STATUS_IRQTOPROC_BITS _u(0x04000000) |
| #define IO_QSPI_USBPHY_DP_STATUS_IRQTOPROC_MSB _u(26) |
| #define IO_QSPI_USBPHY_DP_STATUS_IRQTOPROC_LSB _u(26) |
| #define IO_QSPI_USBPHY_DP_STATUS_IRQTOPROC_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DP_STATUS_INFROMPAD |
| // Description : input signal from pad, before filtering and override are |
| // applied |
| #define IO_QSPI_USBPHY_DP_STATUS_INFROMPAD_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DP_STATUS_INFROMPAD_BITS _u(0x00020000) |
| #define IO_QSPI_USBPHY_DP_STATUS_INFROMPAD_MSB _u(17) |
| #define IO_QSPI_USBPHY_DP_STATUS_INFROMPAD_LSB _u(17) |
| #define IO_QSPI_USBPHY_DP_STATUS_INFROMPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DP_STATUS_OETOPAD |
| // Description : output enable to pad after register override is applied |
| #define IO_QSPI_USBPHY_DP_STATUS_OETOPAD_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DP_STATUS_OETOPAD_BITS _u(0x00002000) |
| #define IO_QSPI_USBPHY_DP_STATUS_OETOPAD_MSB _u(13) |
| #define IO_QSPI_USBPHY_DP_STATUS_OETOPAD_LSB _u(13) |
| #define IO_QSPI_USBPHY_DP_STATUS_OETOPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DP_STATUS_OUTTOPAD |
| // Description : output signal to pad after register override is applied |
| #define IO_QSPI_USBPHY_DP_STATUS_OUTTOPAD_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DP_STATUS_OUTTOPAD_BITS _u(0x00000200) |
| #define IO_QSPI_USBPHY_DP_STATUS_OUTTOPAD_MSB _u(9) |
| #define IO_QSPI_USBPHY_DP_STATUS_OUTTOPAD_LSB _u(9) |
| #define IO_QSPI_USBPHY_DP_STATUS_OUTTOPAD_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_USBPHY_DP_CTRL |
| #define IO_QSPI_USBPHY_DP_CTRL_OFFSET _u(0x00000004) |
| #define IO_QSPI_USBPHY_DP_CTRL_BITS _u(0x3003f01f) |
| #define IO_QSPI_USBPHY_DP_CTRL_RESET _u(0x0000001f) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DP_CTRL_IRQOVER |
| // 0x0 -> don't invert the interrupt |
| // 0x1 -> invert the interrupt |
| // 0x2 -> drive interrupt low |
| // 0x3 -> drive interrupt high |
| #define IO_QSPI_USBPHY_DP_CTRL_IRQOVER_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DP_CTRL_IRQOVER_BITS _u(0x30000000) |
| #define IO_QSPI_USBPHY_DP_CTRL_IRQOVER_MSB _u(29) |
| #define IO_QSPI_USBPHY_DP_CTRL_IRQOVER_LSB _u(28) |
| #define IO_QSPI_USBPHY_DP_CTRL_IRQOVER_ACCESS "RW" |
| #define IO_QSPI_USBPHY_DP_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_USBPHY_DP_CTRL_IRQOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_USBPHY_DP_CTRL_IRQOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_USBPHY_DP_CTRL_IRQOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DP_CTRL_INOVER |
| // 0x0 -> don't invert the peri input |
| // 0x1 -> invert the peri input |
| // 0x2 -> drive peri input low |
| // 0x3 -> drive peri input high |
| #define IO_QSPI_USBPHY_DP_CTRL_INOVER_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DP_CTRL_INOVER_BITS _u(0x00030000) |
| #define IO_QSPI_USBPHY_DP_CTRL_INOVER_MSB _u(17) |
| #define IO_QSPI_USBPHY_DP_CTRL_INOVER_LSB _u(16) |
| #define IO_QSPI_USBPHY_DP_CTRL_INOVER_ACCESS "RW" |
| #define IO_QSPI_USBPHY_DP_CTRL_INOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_USBPHY_DP_CTRL_INOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_USBPHY_DP_CTRL_INOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_USBPHY_DP_CTRL_INOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DP_CTRL_OEOVER |
| // 0x0 -> drive output enable from peripheral signal selected by funcsel |
| // 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel |
| // 0x2 -> disable output |
| // 0x3 -> enable output |
| #define IO_QSPI_USBPHY_DP_CTRL_OEOVER_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DP_CTRL_OEOVER_BITS _u(0x0000c000) |
| #define IO_QSPI_USBPHY_DP_CTRL_OEOVER_MSB _u(15) |
| #define IO_QSPI_USBPHY_DP_CTRL_OEOVER_LSB _u(14) |
| #define IO_QSPI_USBPHY_DP_CTRL_OEOVER_ACCESS "RW" |
| #define IO_QSPI_USBPHY_DP_CTRL_OEOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_USBPHY_DP_CTRL_OEOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_USBPHY_DP_CTRL_OEOVER_VALUE_DISABLE _u(0x2) |
| #define IO_QSPI_USBPHY_DP_CTRL_OEOVER_VALUE_ENABLE _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DP_CTRL_OUTOVER |
| // 0x0 -> drive output from peripheral signal selected by funcsel |
| // 0x1 -> drive output from inverse of peripheral signal selected by funcsel |
| // 0x2 -> drive output low |
| // 0x3 -> drive output high |
| #define IO_QSPI_USBPHY_DP_CTRL_OUTOVER_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DP_CTRL_OUTOVER_BITS _u(0x00003000) |
| #define IO_QSPI_USBPHY_DP_CTRL_OUTOVER_MSB _u(13) |
| #define IO_QSPI_USBPHY_DP_CTRL_OUTOVER_LSB _u(12) |
| #define IO_QSPI_USBPHY_DP_CTRL_OUTOVER_ACCESS "RW" |
| #define IO_QSPI_USBPHY_DP_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_USBPHY_DP_CTRL_OUTOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_USBPHY_DP_CTRL_OUTOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_USBPHY_DP_CTRL_OUTOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DP_CTRL_FUNCSEL |
| // Description : 0-31 -> selects pin function according to the gpio table |
| // 31 == NULL |
| // 0x02 -> uart1_tx |
| // 0x03 -> i2c0_sda |
| // 0x05 -> siob_proc_56 |
| // 0x1f -> null |
| #define IO_QSPI_USBPHY_DP_CTRL_FUNCSEL_RESET _u(0x1f) |
| #define IO_QSPI_USBPHY_DP_CTRL_FUNCSEL_BITS _u(0x0000001f) |
| #define IO_QSPI_USBPHY_DP_CTRL_FUNCSEL_MSB _u(4) |
| #define IO_QSPI_USBPHY_DP_CTRL_FUNCSEL_LSB _u(0) |
| #define IO_QSPI_USBPHY_DP_CTRL_FUNCSEL_ACCESS "RW" |
| #define IO_QSPI_USBPHY_DP_CTRL_FUNCSEL_VALUE_UART1_TX _u(0x02) |
| #define IO_QSPI_USBPHY_DP_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) |
| #define IO_QSPI_USBPHY_DP_CTRL_FUNCSEL_VALUE_SIOB_PROC_56 _u(0x05) |
| #define IO_QSPI_USBPHY_DP_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) |
| // ============================================================================= |
| // Register : IO_QSPI_USBPHY_DM_STATUS |
| #define IO_QSPI_USBPHY_DM_STATUS_OFFSET _u(0x00000008) |
| #define IO_QSPI_USBPHY_DM_STATUS_BITS _u(0x04022200) |
| #define IO_QSPI_USBPHY_DM_STATUS_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DM_STATUS_IRQTOPROC |
| // Description : interrupt to processors, after override is applied |
| #define IO_QSPI_USBPHY_DM_STATUS_IRQTOPROC_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DM_STATUS_IRQTOPROC_BITS _u(0x04000000) |
| #define IO_QSPI_USBPHY_DM_STATUS_IRQTOPROC_MSB _u(26) |
| #define IO_QSPI_USBPHY_DM_STATUS_IRQTOPROC_LSB _u(26) |
| #define IO_QSPI_USBPHY_DM_STATUS_IRQTOPROC_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DM_STATUS_INFROMPAD |
| // Description : input signal from pad, before filtering and override are |
| // applied |
| #define IO_QSPI_USBPHY_DM_STATUS_INFROMPAD_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DM_STATUS_INFROMPAD_BITS _u(0x00020000) |
| #define IO_QSPI_USBPHY_DM_STATUS_INFROMPAD_MSB _u(17) |
| #define IO_QSPI_USBPHY_DM_STATUS_INFROMPAD_LSB _u(17) |
| #define IO_QSPI_USBPHY_DM_STATUS_INFROMPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DM_STATUS_OETOPAD |
| // Description : output enable to pad after register override is applied |
| #define IO_QSPI_USBPHY_DM_STATUS_OETOPAD_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DM_STATUS_OETOPAD_BITS _u(0x00002000) |
| #define IO_QSPI_USBPHY_DM_STATUS_OETOPAD_MSB _u(13) |
| #define IO_QSPI_USBPHY_DM_STATUS_OETOPAD_LSB _u(13) |
| #define IO_QSPI_USBPHY_DM_STATUS_OETOPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DM_STATUS_OUTTOPAD |
| // Description : output signal to pad after register override is applied |
| #define IO_QSPI_USBPHY_DM_STATUS_OUTTOPAD_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DM_STATUS_OUTTOPAD_BITS _u(0x00000200) |
| #define IO_QSPI_USBPHY_DM_STATUS_OUTTOPAD_MSB _u(9) |
| #define IO_QSPI_USBPHY_DM_STATUS_OUTTOPAD_LSB _u(9) |
| #define IO_QSPI_USBPHY_DM_STATUS_OUTTOPAD_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_USBPHY_DM_CTRL |
| #define IO_QSPI_USBPHY_DM_CTRL_OFFSET _u(0x0000000c) |
| #define IO_QSPI_USBPHY_DM_CTRL_BITS _u(0x3003f01f) |
| #define IO_QSPI_USBPHY_DM_CTRL_RESET _u(0x0000001f) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DM_CTRL_IRQOVER |
| // 0x0 -> don't invert the interrupt |
| // 0x1 -> invert the interrupt |
| // 0x2 -> drive interrupt low |
| // 0x3 -> drive interrupt high |
| #define IO_QSPI_USBPHY_DM_CTRL_IRQOVER_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DM_CTRL_IRQOVER_BITS _u(0x30000000) |
| #define IO_QSPI_USBPHY_DM_CTRL_IRQOVER_MSB _u(29) |
| #define IO_QSPI_USBPHY_DM_CTRL_IRQOVER_LSB _u(28) |
| #define IO_QSPI_USBPHY_DM_CTRL_IRQOVER_ACCESS "RW" |
| #define IO_QSPI_USBPHY_DM_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_USBPHY_DM_CTRL_IRQOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_USBPHY_DM_CTRL_IRQOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_USBPHY_DM_CTRL_IRQOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DM_CTRL_INOVER |
| // 0x0 -> don't invert the peri input |
| // 0x1 -> invert the peri input |
| // 0x2 -> drive peri input low |
| // 0x3 -> drive peri input high |
| #define IO_QSPI_USBPHY_DM_CTRL_INOVER_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DM_CTRL_INOVER_BITS _u(0x00030000) |
| #define IO_QSPI_USBPHY_DM_CTRL_INOVER_MSB _u(17) |
| #define IO_QSPI_USBPHY_DM_CTRL_INOVER_LSB _u(16) |
| #define IO_QSPI_USBPHY_DM_CTRL_INOVER_ACCESS "RW" |
| #define IO_QSPI_USBPHY_DM_CTRL_INOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_USBPHY_DM_CTRL_INOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_USBPHY_DM_CTRL_INOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_USBPHY_DM_CTRL_INOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DM_CTRL_OEOVER |
| // 0x0 -> drive output enable from peripheral signal selected by funcsel |
| // 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel |
| // 0x2 -> disable output |
| // 0x3 -> enable output |
| #define IO_QSPI_USBPHY_DM_CTRL_OEOVER_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DM_CTRL_OEOVER_BITS _u(0x0000c000) |
| #define IO_QSPI_USBPHY_DM_CTRL_OEOVER_MSB _u(15) |
| #define IO_QSPI_USBPHY_DM_CTRL_OEOVER_LSB _u(14) |
| #define IO_QSPI_USBPHY_DM_CTRL_OEOVER_ACCESS "RW" |
| #define IO_QSPI_USBPHY_DM_CTRL_OEOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_USBPHY_DM_CTRL_OEOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_USBPHY_DM_CTRL_OEOVER_VALUE_DISABLE _u(0x2) |
| #define IO_QSPI_USBPHY_DM_CTRL_OEOVER_VALUE_ENABLE _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DM_CTRL_OUTOVER |
| // 0x0 -> drive output from peripheral signal selected by funcsel |
| // 0x1 -> drive output from inverse of peripheral signal selected by funcsel |
| // 0x2 -> drive output low |
| // 0x3 -> drive output high |
| #define IO_QSPI_USBPHY_DM_CTRL_OUTOVER_RESET _u(0x0) |
| #define IO_QSPI_USBPHY_DM_CTRL_OUTOVER_BITS _u(0x00003000) |
| #define IO_QSPI_USBPHY_DM_CTRL_OUTOVER_MSB _u(13) |
| #define IO_QSPI_USBPHY_DM_CTRL_OUTOVER_LSB _u(12) |
| #define IO_QSPI_USBPHY_DM_CTRL_OUTOVER_ACCESS "RW" |
| #define IO_QSPI_USBPHY_DM_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_USBPHY_DM_CTRL_OUTOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_USBPHY_DM_CTRL_OUTOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_USBPHY_DM_CTRL_OUTOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_USBPHY_DM_CTRL_FUNCSEL |
| // Description : 0-31 -> selects pin function according to the gpio table |
| // 31 == NULL |
| // 0x02 -> uart1_rx |
| // 0x03 -> i2c0_scl |
| // 0x05 -> siob_proc_57 |
| // 0x1f -> null |
| #define IO_QSPI_USBPHY_DM_CTRL_FUNCSEL_RESET _u(0x1f) |
| #define IO_QSPI_USBPHY_DM_CTRL_FUNCSEL_BITS _u(0x0000001f) |
| #define IO_QSPI_USBPHY_DM_CTRL_FUNCSEL_MSB _u(4) |
| #define IO_QSPI_USBPHY_DM_CTRL_FUNCSEL_LSB _u(0) |
| #define IO_QSPI_USBPHY_DM_CTRL_FUNCSEL_ACCESS "RW" |
| #define IO_QSPI_USBPHY_DM_CTRL_FUNCSEL_VALUE_UART1_RX _u(0x02) |
| #define IO_QSPI_USBPHY_DM_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) |
| #define IO_QSPI_USBPHY_DM_CTRL_FUNCSEL_VALUE_SIOB_PROC_57 _u(0x05) |
| #define IO_QSPI_USBPHY_DM_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SCLK_STATUS |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OFFSET _u(0x00000010) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_BITS _u(0x04022200) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SCLK_STATUS_IRQTOPROC |
| // Description : interrupt to processors, after override is applied |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_IRQTOPROC_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_IRQTOPROC_BITS _u(0x04000000) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_IRQTOPROC_MSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_IRQTOPROC_LSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_IRQTOPROC_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SCLK_STATUS_INFROMPAD |
| // Description : input signal from pad, before filtering and override are |
| // applied |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_INFROMPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_INFROMPAD_BITS _u(0x00020000) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_INFROMPAD_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_INFROMPAD_LSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_INFROMPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SCLK_STATUS_OETOPAD |
| // Description : output enable to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OETOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OETOPAD_BITS _u(0x00002000) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OETOPAD_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OETOPAD_LSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OETOPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SCLK_STATUS_OUTTOPAD |
| // Description : output signal to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OUTTOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OUTTOPAD_BITS _u(0x00000200) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OUTTOPAD_MSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OUTTOPAD_LSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SCLK_STATUS_OUTTOPAD_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SCLK_CTRL |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OFFSET _u(0x00000014) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_BITS _u(0x3003f01f) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_RESET _u(0x0000001f) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER |
| // 0x0 -> don't invert the interrupt |
| // 0x1 -> invert the interrupt |
| // 0x2 -> drive interrupt low |
| // 0x3 -> drive interrupt high |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_BITS _u(0x30000000) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_MSB _u(29) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_LSB _u(28) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER |
| // 0x0 -> don't invert the peri input |
| // 0x1 -> invert the peri input |
| // 0x2 -> drive peri input low |
| // 0x3 -> drive peri input high |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_BITS _u(0x00030000) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_LSB _u(16) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER |
| // 0x0 -> drive output enable from peripheral signal selected by funcsel |
| // 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel |
| // 0x2 -> disable output |
| // 0x3 -> enable output |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_BITS _u(0x0000c000) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_MSB _u(15) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_LSB _u(14) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_DISABLE _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_ENABLE _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER |
| // 0x0 -> drive output from peripheral signal selected by funcsel |
| // 0x1 -> drive output from inverse of peripheral signal selected by funcsel |
| // 0x2 -> drive output low |
| // 0x3 -> drive output high |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_BITS _u(0x00003000) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_LSB _u(12) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL |
| // Description : 0-31 -> selects pin function according to the gpio table |
| // 31 == NULL |
| // 0x00 -> xip_sclk |
| // 0x02 -> uart1_cts |
| // 0x03 -> i2c1_sda |
| // 0x05 -> siob_proc_58 |
| // 0x0b -> uart1_tx |
| // 0x1f -> null |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_RESET _u(0x1f) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_BITS _u(0x0000001f) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_MSB _u(4) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_LSB _u(0) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_XIP_SCLK _u(0x00) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_UART1_CTS _u(0x02) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_SIOB_PROC_58 _u(0x05) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_UART1_TX _u(0x0b) |
| #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SS_STATUS |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OFFSET _u(0x00000018) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_BITS _u(0x04022200) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SS_STATUS_IRQTOPROC |
| // Description : interrupt to processors, after override is applied |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_IRQTOPROC_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_IRQTOPROC_BITS _u(0x04000000) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_IRQTOPROC_MSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_IRQTOPROC_LSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_IRQTOPROC_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SS_STATUS_INFROMPAD |
| // Description : input signal from pad, before filtering and override are |
| // applied |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_INFROMPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_INFROMPAD_BITS _u(0x00020000) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_INFROMPAD_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_INFROMPAD_LSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_INFROMPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SS_STATUS_OETOPAD |
| // Description : output enable to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OETOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OETOPAD_BITS _u(0x00002000) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OETOPAD_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OETOPAD_LSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OETOPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SS_STATUS_OUTTOPAD |
| // Description : output signal to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OUTTOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OUTTOPAD_BITS _u(0x00000200) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OUTTOPAD_MSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OUTTOPAD_LSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SS_STATUS_OUTTOPAD_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SS_CTRL |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OFFSET _u(0x0000001c) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_BITS _u(0x3003f01f) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_RESET _u(0x0000001f) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER |
| // 0x0 -> don't invert the interrupt |
| // 0x1 -> invert the interrupt |
| // 0x2 -> drive interrupt low |
| // 0x3 -> drive interrupt high |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_BITS _u(0x30000000) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_MSB _u(29) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_LSB _u(28) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER |
| // 0x0 -> don't invert the peri input |
| // 0x1 -> invert the peri input |
| // 0x2 -> drive peri input low |
| // 0x3 -> drive peri input high |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_BITS _u(0x00030000) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_LSB _u(16) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER |
| // 0x0 -> drive output enable from peripheral signal selected by funcsel |
| // 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel |
| // 0x2 -> disable output |
| // 0x3 -> enable output |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS _u(0x0000c000) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_MSB _u(15) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB _u(14) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_DISABLE _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_ENABLE _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER |
| // 0x0 -> drive output from peripheral signal selected by funcsel |
| // 0x1 -> drive output from inverse of peripheral signal selected by funcsel |
| // 0x2 -> drive output low |
| // 0x3 -> drive output high |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_BITS _u(0x00003000) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_LSB _u(12) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL |
| // Description : 0-31 -> selects pin function according to the gpio table |
| // 31 == NULL |
| // 0x00 -> xip_ss_n_0 |
| // 0x02 -> uart1_rts |
| // 0x03 -> i2c1_scl |
| // 0x05 -> siob_proc_59 |
| // 0x0b -> uart1_rx |
| // 0x1f -> null |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_RESET _u(0x1f) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_BITS _u(0x0000001f) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_MSB _u(4) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_LSB _u(0) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_XIP_SS_N_0 _u(0x00) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_UART1_RTS _u(0x02) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_SIOB_PROC_59 _u(0x05) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_UART1_RX _u(0x0b) |
| #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SD0_STATUS |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OFFSET _u(0x00000020) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_BITS _u(0x04022200) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD0_STATUS_IRQTOPROC |
| // Description : interrupt to processors, after override is applied |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_IRQTOPROC_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_IRQTOPROC_BITS _u(0x04000000) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_IRQTOPROC_MSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_IRQTOPROC_LSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_IRQTOPROC_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD0_STATUS_INFROMPAD |
| // Description : input signal from pad, before filtering and override are |
| // applied |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_INFROMPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_INFROMPAD_BITS _u(0x00020000) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_INFROMPAD_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_INFROMPAD_LSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_INFROMPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD0_STATUS_OETOPAD |
| // Description : output enable to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OETOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OETOPAD_BITS _u(0x00002000) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OETOPAD_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OETOPAD_LSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OETOPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD0_STATUS_OUTTOPAD |
| // Description : output signal to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OUTTOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OUTTOPAD_BITS _u(0x00000200) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OUTTOPAD_MSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OUTTOPAD_LSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SD0_STATUS_OUTTOPAD_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SD0_CTRL |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OFFSET _u(0x00000024) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_BITS _u(0x3003f01f) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_RESET _u(0x0000001f) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER |
| // 0x0 -> don't invert the interrupt |
| // 0x1 -> invert the interrupt |
| // 0x2 -> drive interrupt low |
| // 0x3 -> drive interrupt high |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_BITS _u(0x30000000) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_MSB _u(29) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_LSB _u(28) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER |
| // 0x0 -> don't invert the peri input |
| // 0x1 -> invert the peri input |
| // 0x2 -> drive peri input low |
| // 0x3 -> drive peri input high |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_BITS _u(0x00030000) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_LSB _u(16) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER |
| // 0x0 -> drive output enable from peripheral signal selected by funcsel |
| // 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel |
| // 0x2 -> disable output |
| // 0x3 -> enable output |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_BITS _u(0x0000c000) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_MSB _u(15) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_LSB _u(14) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_DISABLE _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_ENABLE _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER |
| // 0x0 -> drive output from peripheral signal selected by funcsel |
| // 0x1 -> drive output from inverse of peripheral signal selected by funcsel |
| // 0x2 -> drive output low |
| // 0x3 -> drive output high |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_BITS _u(0x00003000) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_LSB _u(12) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL |
| // Description : 0-31 -> selects pin function according to the gpio table |
| // 31 == NULL |
| // 0x00 -> xip_sd0 |
| // 0x02 -> uart0_tx |
| // 0x03 -> i2c0_sda |
| // 0x05 -> siob_proc_60 |
| // 0x1f -> null |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_RESET _u(0x1f) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_BITS _u(0x0000001f) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_MSB _u(4) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_LSB _u(0) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_VALUE_XIP_SD0 _u(0x00) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_VALUE_UART0_TX _u(0x02) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_VALUE_SIOB_PROC_60 _u(0x05) |
| #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SD1_STATUS |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OFFSET _u(0x00000028) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_BITS _u(0x04022200) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD1_STATUS_IRQTOPROC |
| // Description : interrupt to processors, after override is applied |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_IRQTOPROC_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_IRQTOPROC_BITS _u(0x04000000) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_IRQTOPROC_MSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_IRQTOPROC_LSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_IRQTOPROC_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD1_STATUS_INFROMPAD |
| // Description : input signal from pad, before filtering and override are |
| // applied |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_INFROMPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_INFROMPAD_BITS _u(0x00020000) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_INFROMPAD_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_INFROMPAD_LSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_INFROMPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD1_STATUS_OETOPAD |
| // Description : output enable to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OETOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OETOPAD_BITS _u(0x00002000) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OETOPAD_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OETOPAD_LSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OETOPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD1_STATUS_OUTTOPAD |
| // Description : output signal to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OUTTOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OUTTOPAD_BITS _u(0x00000200) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OUTTOPAD_MSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OUTTOPAD_LSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SD1_STATUS_OUTTOPAD_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SD1_CTRL |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OFFSET _u(0x0000002c) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_BITS _u(0x3003f01f) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_RESET _u(0x0000001f) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER |
| // 0x0 -> don't invert the interrupt |
| // 0x1 -> invert the interrupt |
| // 0x2 -> drive interrupt low |
| // 0x3 -> drive interrupt high |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_BITS _u(0x30000000) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_MSB _u(29) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_LSB _u(28) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER |
| // 0x0 -> don't invert the peri input |
| // 0x1 -> invert the peri input |
| // 0x2 -> drive peri input low |
| // 0x3 -> drive peri input high |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_BITS _u(0x00030000) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_LSB _u(16) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER |
| // 0x0 -> drive output enable from peripheral signal selected by funcsel |
| // 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel |
| // 0x2 -> disable output |
| // 0x3 -> enable output |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_BITS _u(0x0000c000) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_MSB _u(15) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_LSB _u(14) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_DISABLE _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_ENABLE _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER |
| // 0x0 -> drive output from peripheral signal selected by funcsel |
| // 0x1 -> drive output from inverse of peripheral signal selected by funcsel |
| // 0x2 -> drive output low |
| // 0x3 -> drive output high |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_BITS _u(0x00003000) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_LSB _u(12) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL |
| // Description : 0-31 -> selects pin function according to the gpio table |
| // 31 == NULL |
| // 0x00 -> xip_sd1 |
| // 0x02 -> uart0_rx |
| // 0x03 -> i2c0_scl |
| // 0x05 -> siob_proc_61 |
| // 0x1f -> null |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_RESET _u(0x1f) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_BITS _u(0x0000001f) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_MSB _u(4) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_LSB _u(0) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_VALUE_XIP_SD1 _u(0x00) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_VALUE_UART0_RX _u(0x02) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_VALUE_SIOB_PROC_61 _u(0x05) |
| #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SD2_STATUS |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OFFSET _u(0x00000030) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_BITS _u(0x04022200) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD2_STATUS_IRQTOPROC |
| // Description : interrupt to processors, after override is applied |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_IRQTOPROC_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_IRQTOPROC_BITS _u(0x04000000) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_IRQTOPROC_MSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_IRQTOPROC_LSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_IRQTOPROC_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD2_STATUS_INFROMPAD |
| // Description : input signal from pad, before filtering and override are |
| // applied |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_INFROMPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_INFROMPAD_BITS _u(0x00020000) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_INFROMPAD_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_INFROMPAD_LSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_INFROMPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD2_STATUS_OETOPAD |
| // Description : output enable to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OETOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OETOPAD_BITS _u(0x00002000) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OETOPAD_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OETOPAD_LSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OETOPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD2_STATUS_OUTTOPAD |
| // Description : output signal to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OUTTOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OUTTOPAD_BITS _u(0x00000200) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OUTTOPAD_MSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OUTTOPAD_LSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SD2_STATUS_OUTTOPAD_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SD2_CTRL |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OFFSET _u(0x00000034) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_BITS _u(0x3003f01f) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_RESET _u(0x0000001f) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER |
| // 0x0 -> don't invert the interrupt |
| // 0x1 -> invert the interrupt |
| // 0x2 -> drive interrupt low |
| // 0x3 -> drive interrupt high |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_BITS _u(0x30000000) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_MSB _u(29) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_LSB _u(28) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER |
| // 0x0 -> don't invert the peri input |
| // 0x1 -> invert the peri input |
| // 0x2 -> drive peri input low |
| // 0x3 -> drive peri input high |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_BITS _u(0x00030000) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_LSB _u(16) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER |
| // 0x0 -> drive output enable from peripheral signal selected by funcsel |
| // 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel |
| // 0x2 -> disable output |
| // 0x3 -> enable output |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_BITS _u(0x0000c000) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_MSB _u(15) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_LSB _u(14) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_DISABLE _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_ENABLE _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER |
| // 0x0 -> drive output from peripheral signal selected by funcsel |
| // 0x1 -> drive output from inverse of peripheral signal selected by funcsel |
| // 0x2 -> drive output low |
| // 0x3 -> drive output high |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_BITS _u(0x00003000) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_LSB _u(12) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL |
| // Description : 0-31 -> selects pin function according to the gpio table |
| // 31 == NULL |
| // 0x00 -> xip_sd2 |
| // 0x02 -> uart0_cts |
| // 0x03 -> i2c1_sda |
| // 0x05 -> siob_proc_62 |
| // 0x0b -> uart0_tx |
| // 0x1f -> null |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_RESET _u(0x1f) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_BITS _u(0x0000001f) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_MSB _u(4) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_LSB _u(0) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_XIP_SD2 _u(0x00) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_UART0_CTS _u(0x02) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_SIOB_PROC_62 _u(0x05) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_UART0_TX _u(0x0b) |
| #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SD3_STATUS |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OFFSET _u(0x00000038) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_BITS _u(0x04022200) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD3_STATUS_IRQTOPROC |
| // Description : interrupt to processors, after override is applied |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_IRQTOPROC_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_IRQTOPROC_BITS _u(0x04000000) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_IRQTOPROC_MSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_IRQTOPROC_LSB _u(26) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_IRQTOPROC_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD3_STATUS_INFROMPAD |
| // Description : input signal from pad, before filtering and override are |
| // applied |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_INFROMPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_INFROMPAD_BITS _u(0x00020000) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_INFROMPAD_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_INFROMPAD_LSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_INFROMPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD3_STATUS_OETOPAD |
| // Description : output enable to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OETOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OETOPAD_BITS _u(0x00002000) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OETOPAD_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OETOPAD_LSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OETOPAD_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD3_STATUS_OUTTOPAD |
| // Description : output signal to pad after register override is applied |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OUTTOPAD_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OUTTOPAD_BITS _u(0x00000200) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OUTTOPAD_MSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OUTTOPAD_LSB _u(9) |
| #define IO_QSPI_GPIO_QSPI_SD3_STATUS_OUTTOPAD_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_GPIO_QSPI_SD3_CTRL |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OFFSET _u(0x0000003c) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_BITS _u(0x3003f01f) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_RESET _u(0x0000001f) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER |
| // 0x0 -> don't invert the interrupt |
| // 0x1 -> invert the interrupt |
| // 0x2 -> drive interrupt low |
| // 0x3 -> drive interrupt high |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_BITS _u(0x30000000) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_MSB _u(29) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_LSB _u(28) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER |
| // 0x0 -> don't invert the peri input |
| // 0x1 -> invert the peri input |
| // 0x2 -> drive peri input low |
| // 0x3 -> drive peri input high |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_BITS _u(0x00030000) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_MSB _u(17) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_LSB _u(16) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER |
| // 0x0 -> drive output enable from peripheral signal selected by funcsel |
| // 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel |
| // 0x2 -> disable output |
| // 0x3 -> enable output |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_BITS _u(0x0000c000) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_MSB _u(15) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_LSB _u(14) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_DISABLE _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_ENABLE _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER |
| // 0x0 -> drive output from peripheral signal selected by funcsel |
| // 0x1 -> drive output from inverse of peripheral signal selected by funcsel |
| // 0x2 -> drive output low |
| // 0x3 -> drive output high |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_RESET _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_BITS _u(0x00003000) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_MSB _u(13) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_LSB _u(12) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_VALUE_INVERT _u(0x1) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_VALUE_LOW _u(0x2) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_VALUE_HIGH _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL |
| // Description : 0-31 -> selects pin function according to the gpio table |
| // 31 == NULL |
| // 0x00 -> xip_sd3 |
| // 0x02 -> uart0_rts |
| // 0x03 -> i2c1_scl |
| // 0x05 -> siob_proc_63 |
| // 0x0b -> uart0_rx |
| // 0x1f -> null |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_RESET _u(0x1f) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_BITS _u(0x0000001f) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_MSB _u(4) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_LSB _u(0) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_ACCESS "RW" |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_XIP_SD3 _u(0x00) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_UART0_RTS _u(0x02) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_SIOB_PROC_63 _u(0x05) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_UART0_RX _u(0x0b) |
| #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) |
| // ============================================================================= |
| // Register : IO_QSPI_IRQSUMMARY_PROC0_SECURE |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_OFFSET _u(0x00000200) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_BITS _u(0x000000ff) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD3 |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD3_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD3_BITS _u(0x00000080) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD3_MSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD3_LSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD3_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD2 |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD2_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD2_BITS _u(0x00000040) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD2_MSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD2_LSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD2_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD1 |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD1_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD1_BITS _u(0x00000020) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD1_MSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD1_LSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD1_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD0 |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD0_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD0_BITS _u(0x00000010) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD0_MSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD0_LSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SD0_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SS |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SS_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SS_BITS _u(0x00000008) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SS_MSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SS_LSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SS_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SCLK |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SCLK_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SCLK_BITS _u(0x00000004) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SCLK_MSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SCLK_LSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_GPIO_QSPI_SCLK_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DM |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DM_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DM_BITS _u(0x00000002) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DM_MSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DM_LSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DM_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DP |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DP_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DP_BITS _u(0x00000001) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DP_MSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DP_LSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_SECURE_USBPHY_DP_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_IRQSUMMARY_PROC0_NONSECURE |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_OFFSET _u(0x00000204) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_BITS _u(0x000000ff) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD3 |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD3_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD3_BITS _u(0x00000080) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD3_MSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD3_LSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD3_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD2 |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD2_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD2_BITS _u(0x00000040) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD2_MSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD2_LSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD2_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD1 |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD1_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD1_BITS _u(0x00000020) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD1_MSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD1_LSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD1_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD0 |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD0_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD0_BITS _u(0x00000010) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD0_MSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD0_LSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SD0_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SS |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SS_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SS_BITS _u(0x00000008) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SS_MSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SS_LSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SS_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SCLK |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SCLK_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SCLK_BITS _u(0x00000004) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SCLK_MSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SCLK_LSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_GPIO_QSPI_SCLK_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DM |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DM_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DM_BITS _u(0x00000002) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DM_MSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DM_LSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DM_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DP |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DP_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DP_BITS _u(0x00000001) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DP_MSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DP_LSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_USBPHY_DP_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_IRQSUMMARY_PROC1_SECURE |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_OFFSET _u(0x00000208) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_BITS _u(0x000000ff) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD3 |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD3_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD3_BITS _u(0x00000080) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD3_MSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD3_LSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD3_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD2 |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD2_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD2_BITS _u(0x00000040) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD2_MSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD2_LSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD2_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD1 |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD1_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD1_BITS _u(0x00000020) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD1_MSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD1_LSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD1_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD0 |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD0_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD0_BITS _u(0x00000010) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD0_MSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD0_LSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SD0_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SS |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SS_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SS_BITS _u(0x00000008) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SS_MSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SS_LSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SS_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SCLK |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SCLK_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SCLK_BITS _u(0x00000004) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SCLK_MSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SCLK_LSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_GPIO_QSPI_SCLK_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DM |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DM_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DM_BITS _u(0x00000002) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DM_MSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DM_LSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DM_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DP |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DP_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DP_BITS _u(0x00000001) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DP_MSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DP_LSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_SECURE_USBPHY_DP_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_IRQSUMMARY_PROC1_NONSECURE |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_OFFSET _u(0x0000020c) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_BITS _u(0x000000ff) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD3 |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD3_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD3_BITS _u(0x00000080) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD3_MSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD3_LSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD3_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD2 |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD2_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD2_BITS _u(0x00000040) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD2_MSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD2_LSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD2_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD1 |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD1_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD1_BITS _u(0x00000020) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD1_MSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD1_LSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD1_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD0 |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD0_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD0_BITS _u(0x00000010) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD0_MSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD0_LSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SD0_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SS |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SS_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SS_BITS _u(0x00000008) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SS_MSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SS_LSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SS_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SCLK |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SCLK_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SCLK_BITS _u(0x00000004) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SCLK_MSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SCLK_LSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_GPIO_QSPI_SCLK_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DM |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DM_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DM_BITS _u(0x00000002) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DM_MSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DM_LSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DM_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DP |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DP_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DP_BITS _u(0x00000001) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DP_MSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DP_LSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_USBPHY_DP_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_OFFSET _u(0x00000210) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_BITS _u(0x000000ff) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD3 |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD3_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD3_BITS _u(0x00000080) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD3_MSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD3_LSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD3_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD2 |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD2_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD2_BITS _u(0x00000040) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD2_MSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD2_LSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD2_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD1 |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD1_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD1_BITS _u(0x00000020) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD1_MSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD1_LSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD1_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD0 |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD0_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD0_BITS _u(0x00000010) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD0_MSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD0_LSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SD0_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SS |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SS_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SS_BITS _u(0x00000008) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SS_MSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SS_LSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SS_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SCLK |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SCLK_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SCLK_BITS _u(0x00000004) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SCLK_MSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SCLK_LSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_GPIO_QSPI_SCLK_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DM |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DM_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DM_BITS _u(0x00000002) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DM_MSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DM_LSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DM_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DP |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DP_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DP_BITS _u(0x00000001) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DP_MSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DP_LSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_USBPHY_DP_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_OFFSET _u(0x00000214) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_BITS _u(0x000000ff) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD3 |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD3_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD3_BITS _u(0x00000080) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD3_MSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD3_LSB _u(7) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD3_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD2 |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD2_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD2_BITS _u(0x00000040) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD2_MSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD2_LSB _u(6) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD2_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD1 |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD1_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD1_BITS _u(0x00000020) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD1_MSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD1_LSB _u(5) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD1_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD0 |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD0_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD0_BITS _u(0x00000010) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD0_MSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD0_LSB _u(4) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SD0_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SS |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SS_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SS_BITS _u(0x00000008) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SS_MSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SS_LSB _u(3) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SS_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SCLK |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SCLK_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SCLK_BITS _u(0x00000004) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SCLK_MSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SCLK_LSB _u(2) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_GPIO_QSPI_SCLK_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DM |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DM_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DM_BITS _u(0x00000002) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DM_MSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DM_LSB _u(1) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DM_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DP |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DP_RESET _u(0x0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DP_BITS _u(0x00000001) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DP_MSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DP_LSB _u(0) |
| #define IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_USBPHY_DP_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_INTR |
| // Description : Raw Interrupts |
| #define IO_QSPI_INTR_OFFSET _u(0x00000218) |
| #define IO_QSPI_INTR_BITS _u(0xffffffff) |
| #define IO_QSPI_INTR_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x80000000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(31) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH_LSB _u(31) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x40000000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(30) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW_LSB _u(30) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x20000000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(29) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH_LSB _u(29) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x10000000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(28) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW_LSB _u(28) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x08000000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(27) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH_LSB _u(27) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x04000000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(26) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW_LSB _u(26) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x02000000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(25) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH_LSB _u(25) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x01000000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(24) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW_LSB _u(24) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00800000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(23) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH_LSB _u(23) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00400000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(22) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW_LSB _u(22) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00200000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(21) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH_LSB _u(21) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00100000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(20) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW_LSB _u(20) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00080000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(19) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH_LSB _u(19) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00040000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(18) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW_LSB _u(18) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00020000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(17) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH_LSB _u(17) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00010000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(16) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW_LSB _u(16) |
| #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00008000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(15) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH_LSB _u(15) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00004000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW_MSB _u(14) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW_LSB _u(14) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00002000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(13) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH_LSB _u(13) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00001000) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(12) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW_LSB _u(12) |
| #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000800) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(11) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH_LSB _u(11) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000400) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(10) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW_LSB _u(10) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000200) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(9) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH_LSB _u(9) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_LOW |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000100) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(8) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_LOW_LSB _u(8) |
| #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_USBPHY_DM_EDGE_HIGH |
| #define IO_QSPI_INTR_USBPHY_DM_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_USBPHY_DM_EDGE_HIGH_BITS _u(0x00000080) |
| #define IO_QSPI_INTR_USBPHY_DM_EDGE_HIGH_MSB _u(7) |
| #define IO_QSPI_INTR_USBPHY_DM_EDGE_HIGH_LSB _u(7) |
| #define IO_QSPI_INTR_USBPHY_DM_EDGE_HIGH_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_USBPHY_DM_EDGE_LOW |
| #define IO_QSPI_INTR_USBPHY_DM_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_USBPHY_DM_EDGE_LOW_BITS _u(0x00000040) |
| #define IO_QSPI_INTR_USBPHY_DM_EDGE_LOW_MSB _u(6) |
| #define IO_QSPI_INTR_USBPHY_DM_EDGE_LOW_LSB _u(6) |
| #define IO_QSPI_INTR_USBPHY_DM_EDGE_LOW_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_USBPHY_DM_LEVEL_HIGH |
| #define IO_QSPI_INTR_USBPHY_DM_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_USBPHY_DM_LEVEL_HIGH_BITS _u(0x00000020) |
| #define IO_QSPI_INTR_USBPHY_DM_LEVEL_HIGH_MSB _u(5) |
| #define IO_QSPI_INTR_USBPHY_DM_LEVEL_HIGH_LSB _u(5) |
| #define IO_QSPI_INTR_USBPHY_DM_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_USBPHY_DM_LEVEL_LOW |
| #define IO_QSPI_INTR_USBPHY_DM_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_USBPHY_DM_LEVEL_LOW_BITS _u(0x00000010) |
| #define IO_QSPI_INTR_USBPHY_DM_LEVEL_LOW_MSB _u(4) |
| #define IO_QSPI_INTR_USBPHY_DM_LEVEL_LOW_LSB _u(4) |
| #define IO_QSPI_INTR_USBPHY_DM_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_USBPHY_DP_EDGE_HIGH |
| #define IO_QSPI_INTR_USBPHY_DP_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_USBPHY_DP_EDGE_HIGH_BITS _u(0x00000008) |
| #define IO_QSPI_INTR_USBPHY_DP_EDGE_HIGH_MSB _u(3) |
| #define IO_QSPI_INTR_USBPHY_DP_EDGE_HIGH_LSB _u(3) |
| #define IO_QSPI_INTR_USBPHY_DP_EDGE_HIGH_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_USBPHY_DP_EDGE_LOW |
| #define IO_QSPI_INTR_USBPHY_DP_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_USBPHY_DP_EDGE_LOW_BITS _u(0x00000004) |
| #define IO_QSPI_INTR_USBPHY_DP_EDGE_LOW_MSB _u(2) |
| #define IO_QSPI_INTR_USBPHY_DP_EDGE_LOW_LSB _u(2) |
| #define IO_QSPI_INTR_USBPHY_DP_EDGE_LOW_ACCESS "WC" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_USBPHY_DP_LEVEL_HIGH |
| #define IO_QSPI_INTR_USBPHY_DP_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_INTR_USBPHY_DP_LEVEL_HIGH_BITS _u(0x00000002) |
| #define IO_QSPI_INTR_USBPHY_DP_LEVEL_HIGH_MSB _u(1) |
| #define IO_QSPI_INTR_USBPHY_DP_LEVEL_HIGH_LSB _u(1) |
| #define IO_QSPI_INTR_USBPHY_DP_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_INTR_USBPHY_DP_LEVEL_LOW |
| #define IO_QSPI_INTR_USBPHY_DP_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_INTR_USBPHY_DP_LEVEL_LOW_BITS _u(0x00000001) |
| #define IO_QSPI_INTR_USBPHY_DP_LEVEL_LOW_MSB _u(0) |
| #define IO_QSPI_INTR_USBPHY_DP_LEVEL_LOW_LSB _u(0) |
| #define IO_QSPI_INTR_USBPHY_DP_LEVEL_LOW_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_PROC0_INTE |
| // Description : Interrupt Enable for proc0 |
| #define IO_QSPI_PROC0_INTE_OFFSET _u(0x0000021c) |
| #define IO_QSPI_PROC0_INTE_BITS _u(0xffffffff) |
| #define IO_QSPI_PROC0_INTE_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x80000000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(31) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH_LSB _u(31) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x40000000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(30) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW_LSB _u(30) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x20000000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(29) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_LSB _u(29) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x10000000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(28) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW_LSB _u(28) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x08000000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(27) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH_LSB _u(27) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x04000000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(26) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW_LSB _u(26) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x02000000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(25) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_LSB _u(25) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x01000000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(24) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW_LSB _u(24) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00800000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(23) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH_LSB _u(23) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00400000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(22) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW_LSB _u(22) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00200000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(21) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_LSB _u(21) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00100000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(20) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW_LSB _u(20) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00080000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(19) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH_LSB _u(19) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00040000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(18) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW_LSB _u(18) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00020000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(17) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_LSB _u(17) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00010000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(16) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW_LSB _u(16) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00008000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(15) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH_LSB _u(15) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00004000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW_MSB _u(14) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW_LSB _u(14) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00002000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(13) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH_LSB _u(13) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00001000) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(12) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW_LSB _u(12) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000800) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(11) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_LSB _u(11) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000400) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(10) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW_LSB _u(10) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000200) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(9) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_LSB _u(9) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000100) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(8) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_LSB _u(8) |
| #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_HIGH_BITS _u(0x00000080) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_HIGH_MSB _u(7) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_HIGH_LSB _u(7) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_LOW |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_LOW_BITS _u(0x00000040) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_LOW_MSB _u(6) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_LOW_LSB _u(6) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_HIGH_BITS _u(0x00000020) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_HIGH_MSB _u(5) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_HIGH_LSB _u(5) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_LOW_BITS _u(0x00000010) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_LOW_MSB _u(4) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_LOW_LSB _u(4) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DM_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_HIGH_BITS _u(0x00000008) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_HIGH_MSB _u(3) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_HIGH_LSB _u(3) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_LOW |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_LOW_BITS _u(0x00000004) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_LOW_MSB _u(2) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_LOW_LSB _u(2) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_HIGH_BITS _u(0x00000002) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_HIGH_MSB _u(1) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_HIGH_LSB _u(1) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_LOW_BITS _u(0x00000001) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_LOW_MSB _u(0) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_LOW_LSB _u(0) |
| #define IO_QSPI_PROC0_INTE_USBPHY_DP_LEVEL_LOW_ACCESS "RW" |
| // ============================================================================= |
| // Register : IO_QSPI_PROC0_INTF |
| // Description : Interrupt Force for proc0 |
| #define IO_QSPI_PROC0_INTF_OFFSET _u(0x00000220) |
| #define IO_QSPI_PROC0_INTF_BITS _u(0xffffffff) |
| #define IO_QSPI_PROC0_INTF_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x80000000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(31) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH_LSB _u(31) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x40000000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(30) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW_LSB _u(30) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x20000000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(29) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_LSB _u(29) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x10000000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(28) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW_LSB _u(28) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x08000000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(27) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH_LSB _u(27) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x04000000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(26) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW_LSB _u(26) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x02000000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(25) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_LSB _u(25) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x01000000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(24) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW_LSB _u(24) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00800000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(23) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH_LSB _u(23) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00400000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(22) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW_LSB _u(22) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00200000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(21) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_LSB _u(21) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00100000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(20) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW_LSB _u(20) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00080000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(19) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH_LSB _u(19) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00040000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(18) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW_LSB _u(18) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00020000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(17) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_LSB _u(17) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00010000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(16) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW_LSB _u(16) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00008000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(15) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH_LSB _u(15) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00004000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW_MSB _u(14) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW_LSB _u(14) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00002000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(13) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH_LSB _u(13) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00001000) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(12) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW_LSB _u(12) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000800) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(11) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_LSB _u(11) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000400) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(10) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW_LSB _u(10) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000200) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(9) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_LSB _u(9) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000100) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(8) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_LSB _u(8) |
| #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_HIGH_BITS _u(0x00000080) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_HIGH_MSB _u(7) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_HIGH_LSB _u(7) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_LOW |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_LOW_BITS _u(0x00000040) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_LOW_MSB _u(6) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_LOW_LSB _u(6) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_HIGH_BITS _u(0x00000020) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_HIGH_MSB _u(5) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_HIGH_LSB _u(5) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_LOW_BITS _u(0x00000010) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_LOW_MSB _u(4) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_LOW_LSB _u(4) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DM_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_HIGH_BITS _u(0x00000008) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_HIGH_MSB _u(3) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_HIGH_LSB _u(3) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_LOW |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_LOW_BITS _u(0x00000004) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_LOW_MSB _u(2) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_LOW_LSB _u(2) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_HIGH_BITS _u(0x00000002) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_HIGH_MSB _u(1) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_HIGH_LSB _u(1) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_LOW_BITS _u(0x00000001) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_LOW_MSB _u(0) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_LOW_LSB _u(0) |
| #define IO_QSPI_PROC0_INTF_USBPHY_DP_LEVEL_LOW_ACCESS "RW" |
| // ============================================================================= |
| // Register : IO_QSPI_PROC0_INTS |
| // Description : Interrupt status after masking & forcing for proc0 |
| #define IO_QSPI_PROC0_INTS_OFFSET _u(0x00000224) |
| #define IO_QSPI_PROC0_INTS_BITS _u(0xffffffff) |
| #define IO_QSPI_PROC0_INTS_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x80000000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(31) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH_LSB _u(31) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x40000000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(30) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW_LSB _u(30) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x20000000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(29) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_LSB _u(29) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x10000000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(28) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW_LSB _u(28) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x08000000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(27) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH_LSB _u(27) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x04000000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(26) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW_LSB _u(26) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x02000000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(25) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_LSB _u(25) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x01000000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(24) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW_LSB _u(24) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00800000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(23) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH_LSB _u(23) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00400000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(22) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW_LSB _u(22) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00200000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(21) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_LSB _u(21) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00100000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(20) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW_LSB _u(20) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00080000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(19) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH_LSB _u(19) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00040000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(18) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW_LSB _u(18) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00020000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(17) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_LSB _u(17) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00010000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(16) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW_LSB _u(16) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00008000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(15) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH_LSB _u(15) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00004000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW_MSB _u(14) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW_LSB _u(14) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00002000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(13) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH_LSB _u(13) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00001000) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(12) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW_LSB _u(12) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000800) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(11) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_LSB _u(11) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000400) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(10) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW_LSB _u(10) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000200) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(9) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_LSB _u(9) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000100) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(8) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_LSB _u(8) |
| #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_HIGH_BITS _u(0x00000080) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_HIGH_MSB _u(7) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_HIGH_LSB _u(7) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_LOW |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_LOW_BITS _u(0x00000040) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_LOW_MSB _u(6) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_LOW_LSB _u(6) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_HIGH_BITS _u(0x00000020) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_HIGH_MSB _u(5) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_HIGH_LSB _u(5) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_LOW_BITS _u(0x00000010) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_LOW_MSB _u(4) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_LOW_LSB _u(4) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DM_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_HIGH |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_HIGH_BITS _u(0x00000008) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_HIGH_MSB _u(3) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_HIGH_LSB _u(3) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_LOW |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_LOW_BITS _u(0x00000004) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_LOW_MSB _u(2) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_LOW_LSB _u(2) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_HIGH |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_HIGH_BITS _u(0x00000002) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_HIGH_MSB _u(1) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_HIGH_LSB _u(1) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_LOW |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_LOW_BITS _u(0x00000001) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_LOW_MSB _u(0) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_LOW_LSB _u(0) |
| #define IO_QSPI_PROC0_INTS_USBPHY_DP_LEVEL_LOW_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_PROC1_INTE |
| // Description : Interrupt Enable for proc1 |
| #define IO_QSPI_PROC1_INTE_OFFSET _u(0x00000228) |
| #define IO_QSPI_PROC1_INTE_BITS _u(0xffffffff) |
| #define IO_QSPI_PROC1_INTE_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x80000000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(31) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH_LSB _u(31) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x40000000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(30) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW_LSB _u(30) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x20000000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(29) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_LSB _u(29) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x10000000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(28) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW_LSB _u(28) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x08000000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(27) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH_LSB _u(27) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x04000000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(26) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW_LSB _u(26) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x02000000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(25) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_LSB _u(25) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x01000000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(24) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW_LSB _u(24) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00800000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(23) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH_LSB _u(23) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00400000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(22) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW_LSB _u(22) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00200000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(21) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_LSB _u(21) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00100000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(20) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW_LSB _u(20) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00080000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(19) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH_LSB _u(19) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00040000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(18) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW_LSB _u(18) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00020000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(17) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_LSB _u(17) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00010000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(16) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW_LSB _u(16) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00008000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(15) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH_LSB _u(15) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00004000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW_MSB _u(14) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW_LSB _u(14) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00002000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(13) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH_LSB _u(13) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00001000) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(12) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW_LSB _u(12) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000800) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(11) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_LSB _u(11) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000400) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(10) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW_LSB _u(10) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000200) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(9) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_LSB _u(9) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000100) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(8) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_LSB _u(8) |
| #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_HIGH_BITS _u(0x00000080) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_HIGH_MSB _u(7) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_HIGH_LSB _u(7) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_LOW |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_LOW_BITS _u(0x00000040) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_LOW_MSB _u(6) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_LOW_LSB _u(6) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_HIGH_BITS _u(0x00000020) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_HIGH_MSB _u(5) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_HIGH_LSB _u(5) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_LOW_BITS _u(0x00000010) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_LOW_MSB _u(4) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_LOW_LSB _u(4) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DM_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_HIGH_BITS _u(0x00000008) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_HIGH_MSB _u(3) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_HIGH_LSB _u(3) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_LOW |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_LOW_BITS _u(0x00000004) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_LOW_MSB _u(2) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_LOW_LSB _u(2) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_HIGH_BITS _u(0x00000002) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_HIGH_MSB _u(1) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_HIGH_LSB _u(1) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_LOW_BITS _u(0x00000001) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_LOW_MSB _u(0) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_LOW_LSB _u(0) |
| #define IO_QSPI_PROC1_INTE_USBPHY_DP_LEVEL_LOW_ACCESS "RW" |
| // ============================================================================= |
| // Register : IO_QSPI_PROC1_INTF |
| // Description : Interrupt Force for proc1 |
| #define IO_QSPI_PROC1_INTF_OFFSET _u(0x0000022c) |
| #define IO_QSPI_PROC1_INTF_BITS _u(0xffffffff) |
| #define IO_QSPI_PROC1_INTF_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x80000000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(31) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH_LSB _u(31) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x40000000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(30) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW_LSB _u(30) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x20000000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(29) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_LSB _u(29) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x10000000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(28) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW_LSB _u(28) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x08000000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(27) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH_LSB _u(27) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x04000000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(26) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW_LSB _u(26) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x02000000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(25) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_LSB _u(25) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x01000000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(24) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW_LSB _u(24) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00800000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(23) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH_LSB _u(23) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00400000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(22) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW_LSB _u(22) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00200000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(21) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_LSB _u(21) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00100000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(20) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW_LSB _u(20) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00080000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(19) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH_LSB _u(19) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00040000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(18) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW_LSB _u(18) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00020000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(17) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_LSB _u(17) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00010000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(16) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW_LSB _u(16) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00008000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(15) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH_LSB _u(15) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00004000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW_MSB _u(14) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW_LSB _u(14) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00002000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(13) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH_LSB _u(13) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00001000) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(12) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW_LSB _u(12) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000800) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(11) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_LSB _u(11) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000400) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(10) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW_LSB _u(10) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000200) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(9) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_LSB _u(9) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000100) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(8) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_LSB _u(8) |
| #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_HIGH_BITS _u(0x00000080) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_HIGH_MSB _u(7) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_HIGH_LSB _u(7) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_LOW |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_LOW_BITS _u(0x00000040) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_LOW_MSB _u(6) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_LOW_LSB _u(6) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_HIGH_BITS _u(0x00000020) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_HIGH_MSB _u(5) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_HIGH_LSB _u(5) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_LOW_BITS _u(0x00000010) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_LOW_MSB _u(4) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_LOW_LSB _u(4) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DM_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_HIGH_BITS _u(0x00000008) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_HIGH_MSB _u(3) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_HIGH_LSB _u(3) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_LOW |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_LOW_BITS _u(0x00000004) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_LOW_MSB _u(2) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_LOW_LSB _u(2) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_HIGH_BITS _u(0x00000002) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_HIGH_MSB _u(1) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_HIGH_LSB _u(1) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_LOW_BITS _u(0x00000001) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_LOW_MSB _u(0) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_LOW_LSB _u(0) |
| #define IO_QSPI_PROC1_INTF_USBPHY_DP_LEVEL_LOW_ACCESS "RW" |
| // ============================================================================= |
| // Register : IO_QSPI_PROC1_INTS |
| // Description : Interrupt status after masking & forcing for proc1 |
| #define IO_QSPI_PROC1_INTS_OFFSET _u(0x00000230) |
| #define IO_QSPI_PROC1_INTS_BITS _u(0xffffffff) |
| #define IO_QSPI_PROC1_INTS_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x80000000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(31) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH_LSB _u(31) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x40000000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(30) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW_LSB _u(30) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x20000000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(29) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_LSB _u(29) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x10000000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(28) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW_LSB _u(28) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x08000000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(27) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH_LSB _u(27) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x04000000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(26) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW_LSB _u(26) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x02000000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(25) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_LSB _u(25) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x01000000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(24) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW_LSB _u(24) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00800000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(23) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH_LSB _u(23) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00400000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(22) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW_LSB _u(22) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00200000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(21) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_LSB _u(21) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00100000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(20) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW_LSB _u(20) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00080000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(19) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH_LSB _u(19) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00040000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(18) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW_LSB _u(18) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00020000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(17) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_LSB _u(17) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00010000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(16) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW_LSB _u(16) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00008000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(15) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH_LSB _u(15) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00004000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW_MSB _u(14) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW_LSB _u(14) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00002000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(13) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH_LSB _u(13) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00001000) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(12) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW_LSB _u(12) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000800) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(11) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_LSB _u(11) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000400) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(10) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW_LSB _u(10) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000200) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(9) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_LSB _u(9) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000100) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(8) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_LSB _u(8) |
| #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_HIGH_BITS _u(0x00000080) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_HIGH_MSB _u(7) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_HIGH_LSB _u(7) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_LOW |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_LOW_BITS _u(0x00000040) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_LOW_MSB _u(6) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_LOW_LSB _u(6) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_HIGH_BITS _u(0x00000020) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_HIGH_MSB _u(5) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_HIGH_LSB _u(5) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_LOW_BITS _u(0x00000010) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_LOW_MSB _u(4) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_LOW_LSB _u(4) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DM_LEVEL_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_HIGH |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_HIGH_BITS _u(0x00000008) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_HIGH_MSB _u(3) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_HIGH_LSB _u(3) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_LOW |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_LOW_BITS _u(0x00000004) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_LOW_MSB _u(2) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_LOW_LSB _u(2) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_EDGE_LOW_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_HIGH |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_HIGH_BITS _u(0x00000002) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_HIGH_MSB _u(1) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_HIGH_LSB _u(1) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_HIGH_ACCESS "RO" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_LOW |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_LOW_BITS _u(0x00000001) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_LOW_MSB _u(0) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_LOW_LSB _u(0) |
| #define IO_QSPI_PROC1_INTS_USBPHY_DP_LEVEL_LOW_ACCESS "RO" |
| // ============================================================================= |
| // Register : IO_QSPI_DORMANT_WAKE_INTE |
| // Description : Interrupt Enable for dormant_wake |
| #define IO_QSPI_DORMANT_WAKE_INTE_OFFSET _u(0x00000234) |
| #define IO_QSPI_DORMANT_WAKE_INTE_BITS _u(0xffffffff) |
| #define IO_QSPI_DORMANT_WAKE_INTE_RESET _u(0x00000000) |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x80000000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(31) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH_LSB _u(31) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x40000000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(30) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW_LSB _u(30) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x20000000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(29) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_LSB _u(29) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x10000000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(28) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW_LSB _u(28) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x08000000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(27) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH_LSB _u(27) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x04000000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(26) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW_LSB _u(26) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x02000000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(25) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_LSB _u(25) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x01000000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(24) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW_LSB _u(24) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00800000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(23) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH_LSB _u(23) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00400000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(22) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW_LSB _u(22) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00200000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(21) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_LSB _u(21) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00100000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(20) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW_LSB _u(20) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00080000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(19) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH_LSB _u(19) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00040000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(18) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW_LSB _u(18) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00020000) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(17) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_LSB _u(17) |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_LOW |
| #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) |
|
