| // THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT |
| |
| /** |
| * Copyright (c) 2024 Raspberry Pi Ltd. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| // ============================================================================= |
| // Register block : PADS_QSPI |
| // Version : 1 |
| // Bus type : apb |
| // ============================================================================= |
| #ifndef _HARDWARE_REGS_PADS_QSPI_H |
| #define _HARDWARE_REGS_PADS_QSPI_H |
| // ============================================================================= |
| // Register : PADS_QSPI_VOLTAGE_SELECT |
| // Description : Voltage select. Per bank control |
| // 0x0 -> Set voltage to 3.3V (DVDD >= 2V5) |
| // 0x1 -> Set voltage to 1.8V (DVDD <= 1V8) |
| #define PADS_QSPI_VOLTAGE_SELECT_OFFSET _u(0x00000000) |
| #define PADS_QSPI_VOLTAGE_SELECT_BITS _u(0x00000001) |
| #define PADS_QSPI_VOLTAGE_SELECT_RESET _u(0x00000000) |
| #define PADS_QSPI_VOLTAGE_SELECT_MSB _u(0) |
| #define PADS_QSPI_VOLTAGE_SELECT_LSB _u(0) |
| #define PADS_QSPI_VOLTAGE_SELECT_ACCESS "RW" |
| #define PADS_QSPI_VOLTAGE_SELECT_VALUE_3V3 _u(0x0) |
| #define PADS_QSPI_VOLTAGE_SELECT_VALUE_1V8 _u(0x1) |
| // ============================================================================= |
| // Register : PADS_QSPI_GPIO_QSPI_SCLK |
| #define PADS_QSPI_GPIO_QSPI_SCLK_OFFSET _u(0x00000004) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_BITS _u(0x000001ff) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_RESET _u(0x00000156) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SCLK_ISO |
| // Description : Pad isolation control. Remove this once the pad is configured |
| // by software. |
| #define PADS_QSPI_GPIO_QSPI_SCLK_ISO_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_ISO_BITS _u(0x00000100) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_ISO_MSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_ISO_LSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_ISO_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SCLK_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_QSPI_GPIO_QSPI_SCLK_OD_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_OD_BITS _u(0x00000080) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_OD_MSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_OD_LSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SCLK_IE |
| // Description : Input enable |
| #define PADS_QSPI_GPIO_QSPI_SCLK_IE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_IE_BITS _u(0x00000040) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_IE_MSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_IE_LSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SCLK_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_BITS _u(0x00000030) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_MSB _u(5) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_LSB _u(4) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_ACCESS "RW" |
| #define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_2MA _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_4MA _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_8MA _u(0x2) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_12MA _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SCLK_PUE |
| // Description : Pull up enable |
| #define PADS_QSPI_GPIO_QSPI_SCLK_PUE_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_PUE_BITS _u(0x00000008) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_PUE_MSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_PUE_LSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SCLK_PDE |
| // Description : Pull down enable |
| #define PADS_QSPI_GPIO_QSPI_SCLK_PDE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_PDE_BITS _u(0x00000004) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_PDE_MSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_PDE_LSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_BITS _u(0x00000002) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_MSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_LSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_BITS _u(0x00000001) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_MSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_LSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SCLK_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_QSPI_GPIO_QSPI_SD0 |
| #define PADS_QSPI_GPIO_QSPI_SD0_OFFSET _u(0x00000008) |
| #define PADS_QSPI_GPIO_QSPI_SD0_BITS _u(0x000001ff) |
| #define PADS_QSPI_GPIO_QSPI_SD0_RESET _u(0x00000156) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD0_ISO |
| // Description : Pad isolation control. Remove this once the pad is configured |
| // by software. |
| #define PADS_QSPI_GPIO_QSPI_SD0_ISO_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD0_ISO_BITS _u(0x00000100) |
| #define PADS_QSPI_GPIO_QSPI_SD0_ISO_MSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SD0_ISO_LSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SD0_ISO_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD0_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_QSPI_GPIO_QSPI_SD0_OD_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD0_OD_BITS _u(0x00000080) |
| #define PADS_QSPI_GPIO_QSPI_SD0_OD_MSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SD0_OD_LSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SD0_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD0_IE |
| // Description : Input enable |
| #define PADS_QSPI_GPIO_QSPI_SD0_IE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD0_IE_BITS _u(0x00000040) |
| #define PADS_QSPI_GPIO_QSPI_SD0_IE_MSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SD0_IE_LSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SD0_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD0_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_BITS _u(0x00000030) |
| #define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_MSB _u(5) |
| #define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_LSB _u(4) |
| #define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_ACCESS "RW" |
| #define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_2MA _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_4MA _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_8MA _u(0x2) |
| #define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_12MA _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD0_PUE |
| // Description : Pull up enable |
| #define PADS_QSPI_GPIO_QSPI_SD0_PUE_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD0_PUE_BITS _u(0x00000008) |
| #define PADS_QSPI_GPIO_QSPI_SD0_PUE_MSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SD0_PUE_LSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SD0_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD0_PDE |
| // Description : Pull down enable |
| #define PADS_QSPI_GPIO_QSPI_SD0_PDE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD0_PDE_BITS _u(0x00000004) |
| #define PADS_QSPI_GPIO_QSPI_SD0_PDE_MSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SD0_PDE_LSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SD0_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD0_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_BITS _u(0x00000002) |
| #define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_MSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_LSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SD0_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_BITS _u(0x00000001) |
| #define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_MSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_LSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SD0_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_QSPI_GPIO_QSPI_SD1 |
| #define PADS_QSPI_GPIO_QSPI_SD1_OFFSET _u(0x0000000c) |
| #define PADS_QSPI_GPIO_QSPI_SD1_BITS _u(0x000001ff) |
| #define PADS_QSPI_GPIO_QSPI_SD1_RESET _u(0x00000156) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD1_ISO |
| // Description : Pad isolation control. Remove this once the pad is configured |
| // by software. |
| #define PADS_QSPI_GPIO_QSPI_SD1_ISO_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD1_ISO_BITS _u(0x00000100) |
| #define PADS_QSPI_GPIO_QSPI_SD1_ISO_MSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SD1_ISO_LSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SD1_ISO_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD1_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_QSPI_GPIO_QSPI_SD1_OD_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD1_OD_BITS _u(0x00000080) |
| #define PADS_QSPI_GPIO_QSPI_SD1_OD_MSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SD1_OD_LSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SD1_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD1_IE |
| // Description : Input enable |
| #define PADS_QSPI_GPIO_QSPI_SD1_IE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD1_IE_BITS _u(0x00000040) |
| #define PADS_QSPI_GPIO_QSPI_SD1_IE_MSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SD1_IE_LSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SD1_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD1_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_BITS _u(0x00000030) |
| #define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_MSB _u(5) |
| #define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_LSB _u(4) |
| #define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_ACCESS "RW" |
| #define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_2MA _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_4MA _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_8MA _u(0x2) |
| #define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_12MA _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD1_PUE |
| // Description : Pull up enable |
| #define PADS_QSPI_GPIO_QSPI_SD1_PUE_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD1_PUE_BITS _u(0x00000008) |
| #define PADS_QSPI_GPIO_QSPI_SD1_PUE_MSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SD1_PUE_LSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SD1_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD1_PDE |
| // Description : Pull down enable |
| #define PADS_QSPI_GPIO_QSPI_SD1_PDE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD1_PDE_BITS _u(0x00000004) |
| #define PADS_QSPI_GPIO_QSPI_SD1_PDE_MSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SD1_PDE_LSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SD1_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD1_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_BITS _u(0x00000002) |
| #define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_MSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_LSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SD1_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_BITS _u(0x00000001) |
| #define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_MSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_LSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SD1_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_QSPI_GPIO_QSPI_SD2 |
| #define PADS_QSPI_GPIO_QSPI_SD2_OFFSET _u(0x00000010) |
| #define PADS_QSPI_GPIO_QSPI_SD2_BITS _u(0x000001ff) |
| #define PADS_QSPI_GPIO_QSPI_SD2_RESET _u(0x0000015a) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD2_ISO |
| // Description : Pad isolation control. Remove this once the pad is configured |
| // by software. |
| #define PADS_QSPI_GPIO_QSPI_SD2_ISO_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD2_ISO_BITS _u(0x00000100) |
| #define PADS_QSPI_GPIO_QSPI_SD2_ISO_MSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SD2_ISO_LSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SD2_ISO_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD2_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_QSPI_GPIO_QSPI_SD2_OD_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD2_OD_BITS _u(0x00000080) |
| #define PADS_QSPI_GPIO_QSPI_SD2_OD_MSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SD2_OD_LSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SD2_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD2_IE |
| // Description : Input enable |
| #define PADS_QSPI_GPIO_QSPI_SD2_IE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD2_IE_BITS _u(0x00000040) |
| #define PADS_QSPI_GPIO_QSPI_SD2_IE_MSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SD2_IE_LSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SD2_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD2_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_BITS _u(0x00000030) |
| #define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_MSB _u(5) |
| #define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_LSB _u(4) |
| #define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_ACCESS "RW" |
| #define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_2MA _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_4MA _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_8MA _u(0x2) |
| #define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_12MA _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD2_PUE |
| // Description : Pull up enable |
| #define PADS_QSPI_GPIO_QSPI_SD2_PUE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD2_PUE_BITS _u(0x00000008) |
| #define PADS_QSPI_GPIO_QSPI_SD2_PUE_MSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SD2_PUE_LSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SD2_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD2_PDE |
| // Description : Pull down enable |
| #define PADS_QSPI_GPIO_QSPI_SD2_PDE_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD2_PDE_BITS _u(0x00000004) |
| #define PADS_QSPI_GPIO_QSPI_SD2_PDE_MSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SD2_PDE_LSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SD2_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD2_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_BITS _u(0x00000002) |
| #define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_MSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_LSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SD2_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_BITS _u(0x00000001) |
| #define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_MSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_LSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SD2_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_QSPI_GPIO_QSPI_SD3 |
| #define PADS_QSPI_GPIO_QSPI_SD3_OFFSET _u(0x00000014) |
| #define PADS_QSPI_GPIO_QSPI_SD3_BITS _u(0x000001ff) |
| #define PADS_QSPI_GPIO_QSPI_SD3_RESET _u(0x0000015a) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD3_ISO |
| // Description : Pad isolation control. Remove this once the pad is configured |
| // by software. |
| #define PADS_QSPI_GPIO_QSPI_SD3_ISO_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD3_ISO_BITS _u(0x00000100) |
| #define PADS_QSPI_GPIO_QSPI_SD3_ISO_MSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SD3_ISO_LSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SD3_ISO_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD3_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_QSPI_GPIO_QSPI_SD3_OD_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD3_OD_BITS _u(0x00000080) |
| #define PADS_QSPI_GPIO_QSPI_SD3_OD_MSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SD3_OD_LSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SD3_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD3_IE |
| // Description : Input enable |
| #define PADS_QSPI_GPIO_QSPI_SD3_IE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD3_IE_BITS _u(0x00000040) |
| #define PADS_QSPI_GPIO_QSPI_SD3_IE_MSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SD3_IE_LSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SD3_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD3_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_BITS _u(0x00000030) |
| #define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_MSB _u(5) |
| #define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_LSB _u(4) |
| #define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_ACCESS "RW" |
| #define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_2MA _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_4MA _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_8MA _u(0x2) |
| #define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_12MA _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD3_PUE |
| // Description : Pull up enable |
| #define PADS_QSPI_GPIO_QSPI_SD3_PUE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD3_PUE_BITS _u(0x00000008) |
| #define PADS_QSPI_GPIO_QSPI_SD3_PUE_MSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SD3_PUE_LSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SD3_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD3_PDE |
| // Description : Pull down enable |
| #define PADS_QSPI_GPIO_QSPI_SD3_PDE_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD3_PDE_BITS _u(0x00000004) |
| #define PADS_QSPI_GPIO_QSPI_SD3_PDE_MSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SD3_PDE_LSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SD3_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD3_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_BITS _u(0x00000002) |
| #define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_MSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_LSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SD3_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_BITS _u(0x00000001) |
| #define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_MSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_LSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SD3_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_QSPI_GPIO_QSPI_SS |
| #define PADS_QSPI_GPIO_QSPI_SS_OFFSET _u(0x00000018) |
| #define PADS_QSPI_GPIO_QSPI_SS_BITS _u(0x000001ff) |
| #define PADS_QSPI_GPIO_QSPI_SS_RESET _u(0x0000015a) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SS_ISO |
| // Description : Pad isolation control. Remove this once the pad is configured |
| // by software. |
| #define PADS_QSPI_GPIO_QSPI_SS_ISO_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SS_ISO_BITS _u(0x00000100) |
| #define PADS_QSPI_GPIO_QSPI_SS_ISO_MSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SS_ISO_LSB _u(8) |
| #define PADS_QSPI_GPIO_QSPI_SS_ISO_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SS_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_QSPI_GPIO_QSPI_SS_OD_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SS_OD_BITS _u(0x00000080) |
| #define PADS_QSPI_GPIO_QSPI_SS_OD_MSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SS_OD_LSB _u(7) |
| #define PADS_QSPI_GPIO_QSPI_SS_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SS_IE |
| // Description : Input enable |
| #define PADS_QSPI_GPIO_QSPI_SS_IE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SS_IE_BITS _u(0x00000040) |
| #define PADS_QSPI_GPIO_QSPI_SS_IE_MSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SS_IE_LSB _u(6) |
| #define PADS_QSPI_GPIO_QSPI_SS_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SS_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_QSPI_GPIO_QSPI_SS_DRIVE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SS_DRIVE_BITS _u(0x00000030) |
| #define PADS_QSPI_GPIO_QSPI_SS_DRIVE_MSB _u(5) |
| #define PADS_QSPI_GPIO_QSPI_SS_DRIVE_LSB _u(4) |
| #define PADS_QSPI_GPIO_QSPI_SS_DRIVE_ACCESS "RW" |
| #define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_2MA _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_4MA _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_8MA _u(0x2) |
| #define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_12MA _u(0x3) |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SS_PUE |
| // Description : Pull up enable |
| #define PADS_QSPI_GPIO_QSPI_SS_PUE_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SS_PUE_BITS _u(0x00000008) |
| #define PADS_QSPI_GPIO_QSPI_SS_PUE_MSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SS_PUE_LSB _u(3) |
| #define PADS_QSPI_GPIO_QSPI_SS_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SS_PDE |
| // Description : Pull down enable |
| #define PADS_QSPI_GPIO_QSPI_SS_PDE_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SS_PDE_BITS _u(0x00000004) |
| #define PADS_QSPI_GPIO_QSPI_SS_PDE_MSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SS_PDE_LSB _u(2) |
| #define PADS_QSPI_GPIO_QSPI_SS_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SS_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_RESET _u(0x1) |
| #define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_BITS _u(0x00000002) |
| #define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_MSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_LSB _u(1) |
| #define PADS_QSPI_GPIO_QSPI_SS_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_QSPI_GPIO_QSPI_SS_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_RESET _u(0x0) |
| #define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_BITS _u(0x00000001) |
| #define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_MSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_LSB _u(0) |
| #define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| #endif // _HARDWARE_REGS_PADS_QSPI_H |
| |
