blob: b4db82c9fec600416f194247f9d91dab0103ffc1 [file] [log] [blame]
/*
* Copyright (c) 2017 I-SENSE group of ICCS
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <st/f3/stm32f3.dtsi>
/ {
soc {
usb: usb@40005c00 {
/* Remap USB_LP IRQ to enable use with CAN_1 */
interrupts = <75 0>;
};
i2c2: i2c@40005800 {
compatible = "st,stm32-i2c-v2";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40005800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00400000>,
/* I2C clock source should always be defined,
* even for the default value
*/
<&rcc STM32_SRC_SYSCLK I2C2_SEL(1)>;
interrupts = <33 0>, <34 0>;
interrupt-names = "event", "error";
status = "disabled";
};
spi2: spi@40003800 {
compatible = "st,stm32-spi-fifo", "st,stm32-spi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40003800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00004000>;
interrupts = <36 5>;
status = "disabled";
};
spi3: spi@40003c00 {
compatible = "st,stm32-spi-fifo", "st,stm32-spi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40003c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00008000>;
interrupts = <51 5>;
status = "disabled";
};
uart5: serial@40005000 {
compatible = "st,stm32-uart";
reg = <0x40005000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00100000>;
resets = <&rctl STM32_RESET(APB1, 20U)>;
interrupts = <53 0>;
status = "disabled";
};
pinctrl: pin-controller@48000000 {
gpioe: gpio@48001000 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48001000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00200000>;
};
};
timers1: timers@40012c00 {
compatible = "st,stm32-timers";
reg = <0x40012c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000800>;
resets = <&rctl STM32_RESET(APB2, 11U)>;
interrupts = <24 0>, <25 0>, <26 0>, <27 0>;
interrupt-names = "brk", "up", "trgcom", "cc";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
};
timers4: timers@40000800 {
compatible = "st,stm32-timers";
reg = <0x40000800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000004>;
resets = <&rctl STM32_RESET(APB1, 2U)>;
interrupts = <30 0>;
interrupt-names = "global";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
};
timers8: timers@40013400 {
compatible = "st,stm32-timers";
reg = <0x40013400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00002000>;
resets = <&rctl STM32_RESET(APB2, 13U)>;
interrupts = <43 0>, <44 0>, <45 0>, <46 0>;
interrupt-names = "brk", "up", "trgcom", "cc";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
};
timers20: timers@40015000 {
compatible = "st,stm32-timers";
reg = <0x40015000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00100000>;
resets = <&rctl STM32_RESET(APB2, 20U)>;
interrupts = <77 0>, <78 0>, <79 0>, <80 0>;
interrupt-names = "brk", "up", "trgcom", "cc";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
};
adc1: adc@50000000 {
compatible = "st,stm32-adc";
reg = <0x50000000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x10000000>;
interrupts = <18 0>;
status = "disabled";
vref-mv = <3000>;
#io-channel-cells = <1>;
has-temp-channel;
has-vref-channel;
temp-channel = <16>;
vref-channel = <18>;
};
};
};