| /* |
| * Copyright (c) 2022 Intel Corporation. |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <zephyr/dt-bindings/interrupt-controller/intel-ioapic.h> |
| #include <zephyr/dt-bindings/i2c/i2c.h> |
| #include <zephyr/dt-bindings/pcie/pcie.h> |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| #include "gpio_common.dtsi" |
| |
| / { |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "intel,panther-lake"; |
| d-cache-line-size = <64>; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "intel,panther-lake"; |
| d-cache-line-size = <64>; |
| reg = <1>; |
| }; |
| }; |
| |
| dram0: memory@0 { |
| device_type = "memory"; |
| reg = <0x0 DT_DRAM_SIZE>; |
| }; |
| |
| intc: ioapic@fec00000 { |
| compatible = "intel,ioapic"; |
| #address-cells = <1>; |
| #interrupt-cells = <3>; |
| reg = <0xfec00000 0x1000>; |
| interrupt-controller; |
| }; |
| |
| intc_loapic: loapic@fee00000 { |
| compatible = "intel,loapic"; |
| reg = <0xfee00000 0x1000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| }; |
| |
| acpi { |
| gpio_a: gpio_a { |
| acpi-hid = "INTC10BC"; |
| acpi-uid = "3"; |
| group-index = <0x02>; |
| acpi-ginf-3-param; |
| int-stat-offset = <0x30>; |
| int-en-offset = <0x20>; |
| status = "disabled"; |
| }; |
| |
| gpio_b: gpio_b { |
| acpi-hid = "INTC10BC"; |
| acpi-uid = "5"; |
| group-index = <0x00>; |
| acpi-ginf-3-param; |
| int-stat-offset = <0x30>; |
| int-en-offset = <0x20>; |
| status = "disabled"; |
| }; |
| |
| gpio_c: gpio_c { |
| acpi-hid = "INTC10BC"; |
| acpi-uid = "0"; |
| group-index = <0x01>; |
| acpi-ginf-3-param; |
| int-stat-offset = <0x30>; |
| int-en-offset = <0x20>; |
| status = "disabled"; |
| }; |
| |
| gpio_d: gpio_d { |
| acpi-hid = "INTC10BC"; |
| acpi-uid = "5"; |
| group-index = <0x01>; |
| acpi-ginf-3-param; |
| int-stat-offset = <0x30>; |
| int-en-offset = <0x20>; |
| status = "disabled"; |
| }; |
| |
| gpio_e: gpio_e { |
| acpi-hid = "INTC10BC"; |
| acpi-uid = "1"; |
| group-index = <0x01>; |
| acpi-ginf-3-param; |
| int-stat-offset = <0x30>; |
| int-en-offset = <0x20>; |
| status = "disabled"; |
| }; |
| |
| gpio_f: gpio_f { |
| acpi-hid = "INTC10BC"; |
| acpi-uid = "1"; |
| group-index = <0x00>; |
| acpi-ginf-3-param; |
| int-stat-offset = <0x30>; |
| int-en-offset = <0x20>; |
| status = "disabled"; |
| }; |
| |
| gpio_h: gpio_h { |
| acpi-hid = "INTC10BC"; |
| acpi-uid = "3"; |
| group-index = <0x01>; |
| acpi-ginf-3-param; |
| int-stat-offset = <0x30>; |
| int-en-offset = <0x20>; |
| status = "disabled"; |
| }; |
| |
| gpio_s: gpio_s { |
| acpi-hid = "INTC10BC"; |
| acpi-uid = "4"; |
| group-index = <0x00>; |
| acpi-ginf-3-param; |
| int-stat-offset = <0x30>; |
| int-en-offset = <0x20>; |
| status = "disabled"; |
| }; |
| |
| gpio_v: gpio_v { |
| acpi-hid = "INTC10BC"; |
| acpi-uid = "0"; |
| group-index = <0x00>; |
| acpi-ginf-3-param; |
| int-stat-offset = <0x30>; |
| int-en-offset = <0x20>; |
| status = "disabled"; |
| }; |
| }; |
| |
| pcie0: pcie0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "pcie-controller"; |
| acpi-hid = "PNP0A08"; |
| ranges; |
| |
| smbus0: smbus0 { |
| compatible = "intel,pch-smbus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0xe422>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| i2c0_dma: i2c0_dma { |
| compatible = "intel,lpss"; |
| #dma-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c0 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0xe478>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| dmas = <&i2c0_dma 0>; |
| status = "disabled"; |
| }; |
| |
| i2c1_dma: i2c1_dma { |
| compatible = "intel,lpss"; |
| #dma-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c1 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0xe479>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| dmas = <&i2c1_dma 0>; |
| status = "disabled"; |
| }; |
| |
| i2c2_dma: i2c2_dma { |
| compatible = "intel,lpss"; |
| #dma-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c2 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0xe47a>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| dmas = <&i2c2_dma 0>; |
| status = "disabled"; |
| }; |
| |
| i2c3_dma: i2c3_dma { |
| compatible = "intel,lpss"; |
| #dma-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c3 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0xe47b>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| dmas = <&i2c3_dma 0>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c4 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0xe450>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c5 { |
| compatible = "snps,designware-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vendor-id = <0x8086>; |
| device-id = <0xe451>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi0 { |
| compatible = "intel,penwell-spi"; |
| vendor-id = <0x8086>; |
| device-id = <0xe427>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pw,cs-mode = <0>; |
| pw,cs-output = <0>; |
| pw,fifo-depth = <64>; |
| cs-gpios = <&gpio_e 17 GPIO_ACTIVE_LOW>; |
| clock-frequency = <100000000>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi1 { |
| compatible = "intel,penwell-spi"; |
| vendor-id = <0x8086>; |
| device-id = <0xe430>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pw,cs-mode = <0>; |
| pw,cs-output = <0>; |
| pw,fifo-depth = <64>; |
| cs-gpios = <&gpio_f 17 GPIO_ACTIVE_LOW>; |
| clock-frequency = <100000000>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi2 { |
| compatible = "intel,penwell-spi"; |
| vendor-id = <0x8086>; |
| device-id = <0xe446>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pw,cs-mode = <0>; |
| pw,cs-output = <0>; |
| pw,fifo-depth = <64>; |
| cs-gpios = <&gpio_f 18 GPIO_ACTIVE_LOW>; |
| clock-frequency = <100000000>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| uart0_dma: uart0_dma { |
| compatible = "intel,lpss"; |
| #dma-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| uart0: uart0 { |
| compatible = "ns16550"; |
| vendor-id = <0x8086>; |
| device-id = <0xe425>; |
| reg-shift = <2>; |
| clock-frequency = <1843200>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| current-speed = <115200>; |
| dmas = <&uart0_dma 0>, <&uart0_dma 1>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart1_dma: uart1_dma { |
| compatible = "intel,lpss"; |
| #dma-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| uart1: uart1 { |
| compatible = "ns16550"; |
| vendor-id = <0x8086>; |
| device-id = <0xe426>; |
| reg-shift = <2>; |
| clock-frequency = <1843200>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| current-speed = <115200>; |
| dmas = <&uart1_dma 0>, <&uart1_dma 1>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart2: uart2 { |
| compatible = "ns16550"; |
| vendor-id = <0x8086>; |
| device-id = <0xe452>; |
| reg-shift = <2>; |
| clock-frequency = <1843200>; |
| interrupts = <PCIE_IRQ_DETECT IRQ_TYPE_LOWEST_LEVEL_LOW 3>; |
| interrupt-parent = <&intc>; |
| current-speed = <115200>; |
| status = "disabled"; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges; |
| |
| vtd: vtd@fed91000 { |
| compatible = "intel,vt-d"; |
| reg = <0xfed91000 0x1000>; |
| status = "okay"; |
| }; |
| |
| uart_ec_0: uart@3f8 { |
| compatible = "ns16550"; |
| reg = <0x000003f8 0x100>; |
| io-mapped; |
| clock-frequency = <1843200>; |
| interrupts = <4 IRQ_TYPE_LOWEST_EDGE_RISING 3>; |
| interrupt-parent = <&intc>; |
| reg-shift = <0>; |
| io-mapped; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@5d0000 { |
| compatible = "intel,blinky-pwm"; |
| reg = <0x5d0000 0x500>; |
| reg-upper32 = <0x40>; |
| reg-offset = <0x434>; |
| clock-frequency = <32768>; |
| max-pins = <1>; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| mfd: mfd@70 { |
| compatible = "motorola,mc146818-mfd"; |
| reg = <0x70 0x01 0x71 0x01 0x72 0x01 0x73 0x01>; |
| |
| rtc: counter: rtc { |
| compatible = "motorola,mc146818"; |
| interrupts = <8 IRQ_TYPE_LOWEST_EDGE_RISING 3>; |
| interrupt-parent = <&intc>; |
| alarms-count = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| bbram: bbram { |
| compatible = "motorola,mc146818-bbram"; |
| size = <241>; |
| status = "disabled"; |
| }; |
| |
| status = "disabled"; |
| }; |
| |
| tgpio: tgpio@fe001200 { |
| compatible = "intel,timeaware-gpio"; |
| reg = <0xfe001200 0x100>; |
| timer-clock = <19200000>; |
| max-pins = <2>; |
| artv-ctrl; |
| status = "disabled"; |
| }; |
| |
| hpet: hpet@fed00000 { |
| compatible = "intel,hpet"; |
| reg = <0xfed00000 0x400>; |
| interrupts = <2 IRQ_TYPE_FIXED_EDGE_RISING 4>; |
| interrupt-parent = <&intc>; |
| status = "disabled"; |
| }; |
| |
| tco_wdt: tco_wdt@400 { |
| compatible = "intel,tco-wdt"; |
| reg = <0x0400 0x20>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
