// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright (c) 2021 Blue Clover
 */

/dts-v1/;
#include <nordic/nrf52832_qfaa.dtsi>
#include "blueclover_plt_demo_v2_nrf52832-pinctrl.dtsi"

/ {
	model = "Blue Clover PLT Demo Board V2";
	compatible = "nordic,blueclover-plt-demo-v2-nrf52832";

	chosen {
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,uart-mcumgr = &uart0;
		zephyr,bt-mon-uart = &uart0;
		zephyr,bt-c2h-uart = &uart0;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,code-partition = &slot0_partition;
	};

	buttons {
		compatible = "gpio-keys";
		button0: button_0 {
			gpios = <&gpio0 26 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button switch 0";
		};
		button1: button_1 {
			gpios = <&gpio0 21 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button switch 1";
		};
	};

	/* These aliases are provided for compatibility with samples */
	aliases {
		sw0 = &button0;
		sw1 = &button1;
		pwm-buzzer = &pwm0;
	};
};

&gpiote {
	status ="okay";
};

&gpio0 {
	status ="okay";
};

&uart0 {
	status = "okay";
	compatible = "nordic,nrf-uart";
	current-speed = <115200>;
	pinctrl-0 = <&uart0_default>;
	pinctrl-1 = <&uart0_sleep>;
	pinctrl-names = "default", "sleep";
};

&i2c0 {
	compatible = "nordic,nrf-twi";
	status = "okay";

	pinctrl-0 = <&i2c0_default>;
	pinctrl-1 = <&i2c0_sleep>;
	pinctrl-names = "default", "sleep";
	sht3xd@44 {
		compatible = "sensirion,sht3xd";
		reg = <0x44>;
		label = "SHT3XD";
	};

	bmi270@68 {
		compatible = "bosch,bmi270";
		reg = <0x68>;
		label = "BMI270";
	};
};

&pwm0 {
	/* buzzer */
	status = "okay";
	pinctrl-0 = <&pwm0_default>;
	pinctrl-1 = <&pwm0_sleep>;
	pinctrl-names = "default", "sleep";
};

&spi1 {
	compatible = "nordic,nrf-spi";
	status = "okay";

	pinctrl-0 = <&spi1_default>;
	pinctrl-1 = <&spi1_sleep>;
	pinctrl-names = "default", "sleep";
	apa102@0 {
		compatible = "apa,apa102";
		reg = <0>;
		spi-max-frequency = <5250000>;
		label = "APA102";
	};
};

&flash0 {
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		boot_partition: partition@0 {
			label = "mcuboot";
			reg = <0x00000000 0xc000>;
		};
		slot0_partition: partition@c000 {
			label = "image-0";
			reg = <0x0000C000 0x32000>;
		};
		slot1_partition: partition@3e000 {
			label = "image-1";
			reg = <0x0003E000 0x32000>;
		};
		scratch_partition: partition@70000 {
			label = "image-scratch";
			reg = <0x00070000 0xa000>;
		};
		storage_partition: partition@7a000 {
			label = "storage";
			reg = <0x0007a000 0x00006000>;
		};
	};
};