| /* |
| * Driver for Linear Technology LTC1660/LTC1665 DAC |
| * |
| * Copyright (C) 2023 Marcus Folkesson <marcus.folkesson@gmail.com> |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <zephyr/drivers/spi.h> |
| #include <zephyr/drivers/dac.h> |
| #include <zephyr/logging/log.h> |
| |
| LOG_MODULE_REGISTER(dac_ltc166x, CONFIG_DAC_LOG_LEVEL); |
| |
| #define LTC166X_REG_MASK GENMASK(15, 12) |
| #define LTC166X_DATA8_MASK GENMASK(11, 4) |
| #define LTC166X_DATA10_MASK GENMASK(12, 2) |
| |
| struct ltc166x_config { |
| struct spi_dt_spec bus; |
| uint8_t resolution; |
| uint8_t nchannels; |
| }; |
| |
| static int ltc166x_reg_write(const struct device *dev, uint8_t addr, |
| uint32_t data) |
| { |
| const struct ltc166x_config *config = dev->config; |
| uint16_t regval; |
| |
| regval = FIELD_PREP(LTC166X_REG_MASK, addr); |
| |
| if (config->resolution == 10) { |
| regval |= FIELD_PREP(LTC166X_DATA10_MASK, data); |
| } else { |
| regval |= FIELD_PREP(LTC166X_DATA8_MASK, data); |
| } |
| |
| const struct spi_buf buf = { |
| .buf = ®val, |
| .len = sizeof(regval), |
| }; |
| |
| struct spi_buf_set tx = { |
| .buffers = &buf, |
| .count = 1, |
| }; |
| |
| return spi_write_dt(&config->bus, &tx); |
| } |
| |
| |
| static int ltc166x_channel_setup(const struct device *dev, |
| const struct dac_channel_cfg *channel_cfg) |
| { |
| const struct ltc166x_config *config = dev->config; |
| |
| if (channel_cfg->channel_id > config->nchannels - 1) { |
| LOG_ERR("Unsupported channel %d", channel_cfg->channel_id); |
| return -ENOTSUP; |
| } |
| |
| if (channel_cfg->resolution != config->resolution) { |
| LOG_ERR("Unsupported resolution %d", channel_cfg->resolution); |
| return -ENOTSUP; |
| } |
| |
| if (channel_cfg->internal) { |
| LOG_ERR("Internal channels not supported"); |
| return -ENOTSUP; |
| } |
| |
| return 0; |
| } |
| |
| static int ltc166x_write_value(const struct device *dev, uint8_t channel, |
| uint32_t value) |
| { |
| const struct ltc166x_config *config = dev->config; |
| |
| if (channel > config->nchannels - 1) { |
| LOG_ERR("unsupported channel %d", channel); |
| return -ENOTSUP; |
| } |
| |
| if (value >= (1 << config->resolution)) { |
| LOG_ERR("Value %d out of range", value); |
| return -EINVAL; |
| } |
| |
| return ltc166x_reg_write(dev, channel + 1, value); |
| } |
| |
| static int ltc166x_init(const struct device *dev) |
| { |
| const struct ltc166x_config *config = dev->config; |
| |
| if (!spi_is_ready_dt(&config->bus)) { |
| LOG_ERR("SPI bus %s not ready", config->bus.bus->name); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| static const struct dac_driver_api ltc166x_driver_api = { |
| .channel_setup = ltc166x_channel_setup, |
| .write_value = ltc166x_write_value, |
| }; |
| |
| |
| #define INST_DT_LTC166X(inst, t) DT_INST(inst, lltc_ltc##t) |
| |
| #define LTC166X_DEVICE(t, n, res, nchan) \ |
| static const struct ltc166x_config ltc##t##_config_##n = { \ |
| .bus = SPI_DT_SPEC_GET(INST_DT_LTC166X(n, t), \ |
| SPI_OP_MODE_MASTER | \ |
| SPI_WORD_SET(8), 0), \ |
| .resolution = res, \ |
| .nchannels = nchan, \ |
| }; \ |
| DEVICE_DT_DEFINE(INST_DT_LTC166X(n, t), \ |
| <c166x_init, NULL, \ |
| NULL, \ |
| <c##t##_config_##n, POST_KERNEL, \ |
| CONFIG_DAC_LTC166X_INIT_PRIORITY, \ |
| <c166x_driver_api) |
| |
| /* |
| * LTC1660: 10-bit |
| */ |
| #define LTC1660_DEVICE(n) LTC166X_DEVICE(1660, n, 10, 8) |
| |
| /* |
| * LTC1665: 8-bit |
| */ |
| #define LTC1665_DEVICE(n) LTC166X_DEVICE(1665, n, 8, 8) |
| |
| #define CALL_WITH_ARG(arg, expr) expr(arg) |
| |
| #define INST_DT_LTC166X_FOREACH(t, inst_expr) \ |
| LISTIFY(DT_NUM_INST_STATUS_OKAY(lltc_ltc##t), \ |
| CALL_WITH_ARG, (), inst_expr) |
| |
| INST_DT_LTC166X_FOREACH(1660, LTC1660_DEVICE); |
| INST_DT_LTC166X_FOREACH(1665, LTC1665_DEVICE); |