# SECO SBC-3.5-PX30 board with a single STM32F302VCT6 chip
# Flashing is possible by connecting the board to an ST-Link via SWD
# https://edge.seco.com/juno.html

source [find interface/stlink.cfg]

transport select hla_swd

source [find target/stm32f3x.cfg]

reset_config srst_only

$_TARGETNAME configure -event gdb-attach {
	echo "Debugger attaching: halting execution"
	reset halt
	gdb_breakpoint_override hard
}

$_TARGETNAME configure -event gdb-detach {
	echo "Debugger detaching: resuming execution"
	resume
}