# Copyright (c) 2018, Linaro Limited
# SPDX-License-Identifier: Apache-2.0

description: ENC28J60 standalone 10BASE-T Ethernet controller with SPI interface

compatible: "microchip,enc28j60"

include: [spi-device.yaml, ethernet-controller.yaml]

properties:
  int-gpios:
    type: phandle-array
    required: true
    description: Interrupt pin.

      The interrupt pin of ENC28J60 is active low.
      If connected directly the MCU pin should be configured
      as active low.

  full-duplex:
    type: boolean
    description: |
      Optional feature flag - Enables full duplex reception and transmission.

  hw-rx-filter:
    type: int
    description: |
      Byte value written to the device's
      ERXFCON: ETHERNET RECEIVE FILTER CONTROL REGISTER
      Sets the devices receive packet filter, optional
      If not set in device tree `0xA3` is used, uni, multi and broadcast
      packets with valid CRC are accepted.