# Copyright (c) 2020, Kim Bøndergaard <kim@fam-boendergaard.dk>
# SPDX-License-Identifier: Apache-2.0

description: ST7735R/ST7735S 160x128 (max) display controller

compatible: "sitronix,st7735r"

include: [spi-device.yaml, display-controller.yaml]

properties:
  reset-gpios:
    type: phandle-array
    description: RESET pin.

      The RESET pin of ST7735R is active low.
      If connected directly the MCU pin should be configured
      as active low.

  cmd-data-gpios:
    type: phandle-array
    required: true
    description: D/CX pin.

      The D/CX pin of ST7735R is active low (transmission command byte).
      If connected directly the MCU pin should be configured
      as active low.

  x-offset:
    type: int
    required: true
    description: The column offset in pixels of the LCD to the controller memory

  y-offset:
    type: int
    required: true
    description: The row offset in pixels of the LCD to the controller memory

  madctl:
    type: int
    default: 0x00
    description: Memory Data Access Control

  colmod:
    type: int
    default: 0x06
    description: Interface Pixel Format

  pwctr1:
    type: uint8-array
    default: [0xb4, 0x14, 0x04]
    description: Power Control 1 Parameter

  pwctr2:
    type: uint8-array
    default: [0xc0]
    description: Power Control 2 Parameter

  pwctr3:
    type: uint8-array
    default: [0x0a, 0x00]
    description: Power Control 3 Parameter

  pwctr4:
    type: uint8-array
    default: [0x8a, 0x26]
    description: Power Control 4 Parameter

  pwctr5:
    type: uint8-array
    default: [0x8a, 0xee]
    description: Power Control 5 Parameter

  gamctrp1:
    type: uint8-array
    required: true
    description: Positive Voltage Gamma Control Parameter

  gamctrn1:
    type: uint8-array
    required: true
    description: Negative Voltage Gamma Control Parameter

  frmctr1:
    type: uint8-array
    default: [0x05, 0x3a, 0x3a]
    description: Frame rate control (normal mode / full colors)

  frmctr2:
    type: uint8-array
    default: [0x05, 0x3a, 0x3a]
    description: Frame rate control (idle mode / 8 colors)

  frmctr3:
    type: uint8-array
    default: [0x05, 0x3a, 0x3a, 0x05, 0x3a, 0x3a]
    description: Frame rate control (partial mode / full colors)

  caset:
    type: uint8-array
    default: [0x00, 0x00, 0x00, 0x7f]
    description: Column Address Set

  raset:
    type: uint8-array
    default: [0x00, 0x00, 0x00, 0x9f]
    description: Row Address Set

  vmctr1:
    type: int
    default: 0x0a
    description: VCOM Control 1

  invctr:
    type: int
    default: 0x07
    description: |
      Display Inversion Control
      Set dot inversion or line inversion for each normal/idle/partial mode.

  inversion-on:
    type: boolean
    description: |
      Enable Display Inversion
      Make a drawing with the inverted color of the frame memory.

  rgb-is-inverted:
    type: boolean
    description: |
      Inverting color format order (RGB->BGR or BGR->RGB)
      In the case of enabling this option, API reports pixel-format in capabilities
      as the inverted value of the RGB pixel-format specified in MADCTL.
      This option is convenient for supporting displays with bugs
      where the actual color is different from the pixel format of MADCTL.