# Copyright (c) 2021 STMicroelectronics
# SPDX-License-Identifier: Apache-2.0

description: |
    When setting the odr property in a .dts or .dtsi file you may include
    lps22hh.h and use the macros defined there.

    Example:
    #include <zephyr/dt-bindings/sensor/lps22hh.h>

    lps22hh: lps22hh@0 {
      ...

      odr = <LPS22HH_DT_ODR_200HZ>;
    };

include: sensor-device.yaml

properties:
  drdy-gpios:
    type: phandle-array
    description: |
      DRDY pin

      This pin defaults to active high when produced by the sensor.
      The property value should ensure the flags properly describe
      the signal that is presented to the driver.

  odr:
    type: int
    default: 0
    description: |
        Specify the default output data rate expressed in samples per second (Hz).
        The default is the power-on reset value.

        - 0  # LPS22HH_DT_ODR_POWER_DOWN
        - 1  # LPS22HH_DT_ODR_1HZ
        - 2  # LPS22HH_DT_ODR_10HZ
        - 3  # LPS22HH_DT_ODR_25HZ
        - 4  # LPS22HH_DT_ODR_50HZ
        - 5  # LPS22HH_DT_ODR_75HZ
        - 6  # LPS22HH_DT_ODR_100HZ
        - 7  # LPS22HH_DT_ODR_200HZ

    enum: [0, 1, 2, 3, 4, 5, 6, 7]