/** @file
 *  @brief Bluetooth L2CAP handling
 */

/*
 * Copyright (c) 2015-2016 Intel Corporation
 * Copyright (c) 2023 Nordic Semiconductor
 *
 * SPDX-License-Identifier: Apache-2.0
 */
#ifndef ZEPHYR_INCLUDE_BLUETOOTH_L2CAP_H_
#define ZEPHYR_INCLUDE_BLUETOOTH_L2CAP_H_

/**
 * @brief L2CAP
 * @defgroup bt_l2cap L2CAP
 * @ingroup bluetooth
 * @{
 */

#include <sys/types.h>

#include <zephyr/sys/atomic.h>
#include <zephyr/bluetooth/buf.h>
#include <zephyr/bluetooth/conn.h>
#include <zephyr/bluetooth/hci.h>

#ifdef __cplusplus
extern "C" {
#endif

/** L2CAP PDU header size, used for buffer size calculations */
#define BT_L2CAP_HDR_SIZE               4

/** Maximum Transmission Unit (MTU) for an outgoing L2CAP PDU. */
#define BT_L2CAP_TX_MTU (CONFIG_BT_L2CAP_TX_MTU)

/** Maximum Transmission Unit (MTU) for an incoming L2CAP PDU. */
#define BT_L2CAP_RX_MTU (CONFIG_BT_BUF_ACL_RX_SIZE - BT_L2CAP_HDR_SIZE)

/** @brief Helper to calculate needed buffer size for L2CAP PDUs.
 *         Useful for creating buffer pools.
 *
 *  @param mtu Needed L2CAP PDU MTU.
 *
 *  @return Needed buffer size to match the requested L2CAP PDU MTU.
 */
#define BT_L2CAP_BUF_SIZE(mtu) BT_BUF_ACL_SIZE(BT_L2CAP_HDR_SIZE + (mtu))

/** L2CAP SDU header size, used for buffer size calculations */
#define BT_L2CAP_SDU_HDR_SIZE           2

/** @brief Maximum Transmission Unit for an unsegmented outgoing L2CAP SDU.
 *
 *  The Maximum Transmission Unit for an outgoing L2CAP SDU when sent without
 *  segmentation, i.e. a single L2CAP SDU will fit inside a single L2CAP PDU.
 *
 *  The MTU for outgoing L2CAP SDUs with segmentation is defined by the
 *  size of the application buffer pool.
 */
#define BT_L2CAP_SDU_TX_MTU (BT_L2CAP_TX_MTU - BT_L2CAP_SDU_HDR_SIZE)

/** @brief Maximum Transmission Unit for an unsegmented incoming L2CAP SDU.
 *
 *  The Maximum Transmission Unit for an incoming L2CAP SDU when sent without
 *  segmentation, i.e. a single L2CAP SDU will fit inside a single L2CAP PDU.
 *
 *  The MTU for incoming L2CAP SDUs with segmentation is defined by the
 *  size of the application buffer pool. The application will have to define
 *  an alloc_buf callback for the channel in order to support receiving
 *  segmented L2CAP SDUs.
 */
#define BT_L2CAP_SDU_RX_MTU (BT_L2CAP_RX_MTU - BT_L2CAP_SDU_HDR_SIZE)

/**
 *
 *  @brief Helper to calculate needed buffer size for L2CAP SDUs.
 *         Useful for creating buffer pools.
 *
 *  @param mtu Required BT_L2CAP_*_SDU.
 *
 *  @return Needed buffer size to match the requested L2CAP SDU MTU.
 */
#define BT_L2CAP_SDU_BUF_SIZE(mtu) BT_L2CAP_BUF_SIZE(BT_L2CAP_SDU_HDR_SIZE + (mtu))

struct bt_l2cap_chan;

/** @typedef bt_l2cap_chan_destroy_t
 *  @brief Channel destroy callback
 *
 *  @param chan Channel object.
 */
typedef void (*bt_l2cap_chan_destroy_t)(struct bt_l2cap_chan *chan);

/** @brief Life-span states of L2CAP CoC channel.
 *
 *  Used only by internal APIs dealing with setting channel to proper state
 *  depending on operational context.
 *
 *  A channel enters the @ref BT_L2CAP_CONNECTING state upon @ref
 *  bt_l2cap_chan_connect, @ref bt_l2cap_ecred_chan_connect or upon returning
 *  from @ref bt_l2cap_server.accept.
 *
 *  When a channel leaves the @ref BT_L2CAP_CONNECTING state, @ref
 *  bt_l2cap_chan_ops.connected is called.
 */
typedef enum bt_l2cap_chan_state {
	/** Channel disconnected */
	BT_L2CAP_DISCONNECTED,
	/** Channel in connecting state */
	BT_L2CAP_CONNECTING,
	/** Channel in config state, BR/EDR specific */
	BT_L2CAP_CONFIG,
	/** Channel ready for upper layer traffic on it */
	BT_L2CAP_CONNECTED,
	/** Channel in disconnecting state */
	BT_L2CAP_DISCONNECTING,

} __packed bt_l2cap_chan_state_t;

/** @brief Status of L2CAP channel. */
typedef enum bt_l2cap_chan_status {
	/** Channel can send at least one PDU */
	BT_L2CAP_STATUS_OUT,

	/** @brief Channel shutdown status
	 *
	 * Once this status is notified it means the channel will no longer be
	 * able to transmit or receive data.
	 */
	BT_L2CAP_STATUS_SHUTDOWN,

	/** @brief Channel encryption pending status */
	BT_L2CAP_STATUS_ENCRYPT_PENDING,

	/* Total number of status - must be at the end of the enum */
	BT_L2CAP_NUM_STATUS,
} __packed bt_l2cap_chan_status_t;

/** @brief L2CAP Channel structure. */
struct bt_l2cap_chan {
	/** Channel connection reference */
	struct bt_conn			*conn;
	/** Channel operations reference */
	const struct bt_l2cap_chan_ops	*ops;
	sys_snode_t			node;
	bt_l2cap_chan_destroy_t		destroy;

	ATOMIC_DEFINE(status, BT_L2CAP_NUM_STATUS);
};

/** @brief LE L2CAP Endpoint structure. */
struct bt_l2cap_le_endpoint {
	/** Endpoint Channel Identifier (CID) */
	uint16_t				cid;
	/** Endpoint Maximum Transmission Unit */
	uint16_t				mtu;
	/** Endpoint Maximum PDU payload Size */
	uint16_t				mps;
	/** Endpoint initial credits */
	uint16_t				init_credits;
	/** Endpoint credits */
	atomic_t			credits;
};

/** @brief LE L2CAP Channel structure. */
struct bt_l2cap_le_chan {
	/** Common L2CAP channel reference object */
	struct bt_l2cap_chan		chan;
	/** @brief Channel Receiving Endpoint.
	 *
	 *  If the application has set an alloc_buf channel callback for the
	 *  channel to support receiving segmented L2CAP SDUs the application
	 *  should inititalize the MTU of the Receiving Endpoint. Otherwise the
	 *  MTU of the receiving endpoint will be initialized to
	 *  @ref BT_L2CAP_SDU_RX_MTU by the stack.
	 *
	 *  This is the source of the MTU, MPS and credit values when sending
	 *  L2CAP_LE_CREDIT_BASED_CONNECTION_REQ/RSP and
	 *  L2CAP_CONFIGURATION_REQ.
	 */
	struct bt_l2cap_le_endpoint	rx;

	/** Pending RX MTU on ECFC reconfigure, used internally by stack */
	uint16_t pending_rx_mtu;

	/** Channel Transmission Endpoint.
	 *
	 * This is an image of the remote's rx.
	 *
	 * The MTU and MPS is controlled by the remote by
	 * L2CAP_LE_CREDIT_BASED_CONNECTION_REQ/RSP or L2CAP_CONFIGURATION_REQ.
	 */
	struct bt_l2cap_le_endpoint	tx;
#if defined(CONFIG_BT_L2CAP_DYNAMIC_CHANNEL)
	/** Channel Transmission queue */
	struct k_fifo                   tx_queue;
	/** Channel Pending Transmission buffer  */
	struct net_buf                  *tx_buf;
	/** Channel Transmission work  */
	struct k_work_delayable		tx_work;
	/** Segment SDU packet from upper layer */
	struct net_buf			*_sdu;
	uint16_t			_sdu_len;
#if defined(CONFIG_BT_L2CAP_SEG_RECV)
	uint16_t			_sdu_len_done;
#endif /* CONFIG_BT_L2CAP_SEG_RECV */

	struct k_work			rx_work;
	struct k_fifo			rx_queue;

	bt_l2cap_chan_state_t		state;
	/** Remote PSM to be connected */
	uint16_t			psm;
	/** Helps match request context during CoC */
	uint8_t				ident;
	bt_security_t			required_sec_level;

	/* Response Timeout eXpired (RTX) timer */
	struct k_work_delayable		rtx_work;
	struct k_work_sync		rtx_sync;
#endif
};

/**
 *  @brief Helper macro getting container object of type bt_l2cap_le_chan
 *  address having the same container chan member address as object in question.
 *
 *  @param _ch Address of object of bt_l2cap_chan type
 *
 *  @return Address of in memory bt_l2cap_le_chan object type containing
 *          the address of in question object.
 */
#define BT_L2CAP_LE_CHAN(_ch) CONTAINER_OF(_ch, struct bt_l2cap_le_chan, chan)

/** @brief BREDR L2CAP Endpoint structure. */
struct bt_l2cap_br_endpoint {
	/** Endpoint Channel Identifier (CID) */
	uint16_t				cid;
	/** Endpoint Maximum Transmission Unit */
	uint16_t				mtu;
};

/** @brief BREDR L2CAP Channel structure. */
struct bt_l2cap_br_chan {
	/** Common L2CAP channel reference object */
	struct bt_l2cap_chan		chan;
	/** Channel Receiving Endpoint */
	struct bt_l2cap_br_endpoint	rx;
	/** Channel Transmission Endpoint */
	struct bt_l2cap_br_endpoint	tx;
	/* For internal use only */
	atomic_t			flags[1];

	bt_l2cap_chan_state_t		state;
	/** Remote PSM to be connected */
	uint16_t			psm;
	/** Helps match request context during CoC */
	uint8_t				ident;
	bt_security_t			required_sec_level;

	/* Response Timeout eXpired (RTX) timer */
	struct k_work_delayable		rtx_work;
	struct k_work_sync		rtx_sync;
};

/** @brief L2CAP Channel operations structure. */
struct bt_l2cap_chan_ops {
	/** @brief Channel connected callback
	 *
	 *  If this callback is provided it will be called whenever the
	 *  connection completes.
	 *
	 *  @param chan The channel that has been connected
	 */
	void (*connected)(struct bt_l2cap_chan *chan);

	/** @brief Channel disconnected callback
	 *
	 *  If this callback is provided it will be called whenever the
	 *  channel is disconnected, including when a connection gets
	 *  rejected.
	 *
	 *  @param chan The channel that has been Disconnected
	 */
	void (*disconnected)(struct bt_l2cap_chan *chan);

	/** @brief Channel encrypt_change callback
	 *
	 *  If this callback is provided it will be called whenever the
	 *  security level changed (indirectly link encryption done) or
	 *  authentication procedure fails. In both cases security initiator
	 *  and responder got the final status (HCI status) passed by
	 *  related to encryption and authentication events from local host's
	 *  controller.
	 *
	 *  @param chan The channel which has made encryption status changed.
	 *  @param status HCI status of performed security procedure caused
	 *  by channel security requirements. The value is populated
	 *  by HCI layer and set to 0 when success and to non-zero (reference to
	 *  HCI Error Codes) when security/authentication failed.
	 */
	void (*encrypt_change)(struct bt_l2cap_chan *chan, uint8_t hci_status);

	/** @brief Channel alloc_seg callback
	 *
	 *  If this callback is provided the channel will use it to allocate
	 *  buffers to store segments. This avoids wasting big SDU buffers with
	 *  potentially much smaller PDUs. If this callback is supplied, it must
	 *  return a valid buffer.
	 *
	 *  @param chan The channel requesting a buffer.
	 *
	 *  @return Allocated buffer.
	 */
	struct net_buf *(*alloc_seg)(struct bt_l2cap_chan *chan);

	/** @brief Channel alloc_buf callback
	 *
	 *  If this callback is provided the channel will use it to allocate
	 *  buffers to store incoming data. Channels that requires segmentation
	 *  must set this callback.
	 *  If the application has not set a callback the L2CAP SDU MTU will be
	 *  truncated to @ref BT_L2CAP_SDU_RX_MTU.
	 *
	 *  @param chan The channel requesting a buffer.
	 *
	 *  @return Allocated buffer.
	 */
	struct net_buf *(*alloc_buf)(struct bt_l2cap_chan *chan);

	/** @brief Channel recv callback
	 *
	 *  @param chan The channel receiving data.
	 *  @param buf Buffer containing incoming data.
	 *
	 *  @return 0 in case of success or negative value in case of error.
	 *  @return -EINPROGRESS in case where user has to confirm once the data
	 *                       has been processed by calling
	 *                       @ref bt_l2cap_chan_recv_complete passing back
	 *                       the buffer received with its original user_data
	 *                       which contains the number of segments/credits
	 *                       used by the packet.
	 */
	int (*recv)(struct bt_l2cap_chan *chan, struct net_buf *buf);

	/** @brief Channel sent callback
	 *
	 *  This callback will be called once the controller marks the SDU
	 *  as completed. When the controller does so is implementation
	 *  dependent. It could be after the SDU is enqueued for transmission,
	 *  or after it is sent on air.
	 *
	 *  @param chan The channel which has sent data.
	 */
	void (*sent)(struct bt_l2cap_chan *chan);

	/** @brief Channel status callback
	 *
	 *  If this callback is provided it will be called whenever the
	 *  channel status changes.
	 *
	 *  @param chan The channel which status changed
	 *  @param status The channel status
	 */
	void (*status)(struct bt_l2cap_chan *chan, atomic_t *status);

	/* @brief Channel released callback
	 *
	 * If this callback is set it is called when the stack has release all
	 * references to the channel object.
	 */
	void (*released)(struct bt_l2cap_chan *chan);

	/** @brief Channel reconfigured callback
	 *
	 *  If this callback is provided it will be called whenever peer or
	 *  local device requested reconfiguration. Application may check
	 *  updated MTU and MPS values by inspecting chan->le endpoints.
	 *
	 *  @param chan The channel which was reconfigured
	 */
	void (*reconfigured)(struct bt_l2cap_chan *chan);

#if defined(CONFIG_BT_L2CAP_SEG_RECV)
	/** @brief Handle L2CAP segments directly
	 *
	 *  This is an alternative to @ref bt_l2cap_chan_ops.recv. They cannot
	 *  be used together.
	 *
	 *  This is called immediately for each received segment.
	 *
	 *  Unlike with @ref bt_l2cap_chan_ops.recv, flow control is explicit.
	 *  Each time this handler is invoked, the remote has permanently used
	 *  up one credit. Use @ref bt_l2cap_chan_give_credits to give credits.
	 *
	 *  The start of an SDU is marked by `seg_offset == 0`. The end of an
	 *  SDU is marked by `seg_offset + seg->len == sdu_len`.
	 *
	 *  The stack guarantees that:
	 *    - The sender had the credit.
	 *    - The SDU length does not exceed MTU.
	 *    - The segment length does not exceed MPS.
	 *
	 *  Additionally, the L2CAP protocol is such that:
	 *    - Segments come in order.
	 *    - SDUs cannot be interleaved or aborted halfway.
	 *
	 *  @note With this alternative API, the application is responsible for
	 *  setting the RX MTU and MPS. The MPS must not exceed @ref BT_L2CAP_RX_MTU.
	 *
	 *  @param chan The receiving channel.
	 *  @param sdu_len Byte length of the SDU this segment is part of.
	 *  @param seg_offset The byte offset of this segment in the SDU.
	 *  @param seg The segment payload.
	 */
	void (*seg_recv)(struct bt_l2cap_chan *chan, size_t sdu_len,
			 off_t seg_offset, struct net_buf_simple *seg);
#endif /* CONFIG_BT_L2CAP_SEG_RECV */
};

/**
 *  @brief Headroom needed for outgoing L2CAP PDUs.
 */
#define BT_L2CAP_CHAN_SEND_RESERVE (BT_L2CAP_BUF_SIZE(0))

/**
 * @brief Headroom needed for outgoing L2CAP SDUs.
 */
#define BT_L2CAP_SDU_CHAN_SEND_RESERVE (BT_L2CAP_SDU_BUF_SIZE(0))

/** @brief L2CAP Server structure. */
struct bt_l2cap_server {
	/** @brief Server PSM.
	 *
	 *  Possible values:
	 *  0               A dynamic value will be auto-allocated when
	 *                  bt_l2cap_server_register() is called.
	 *
	 *  0x0001-0x007f   Standard, Bluetooth SIG-assigned fixed values.
	 *
	 *  0x0080-0x00ff   Dynamically allocated. May be pre-set by the
	 *                  application before server registration (not
	 *                  recommended however), or auto-allocated by the
	 *                  stack if the app gave 0 as the value.
	 */
	uint16_t			psm;

	/** Required minimum security level */
	bt_security_t		sec_level;

	/** @brief Server accept callback
	 *
	 *  This callback is called whenever a new incoming connection requires
	 *  authorization.
	 *
	 *  @param conn The connection that is requesting authorization
	 *  @param server Pointer to the server structure this callback relates to
	 *  @param chan Pointer to received the allocated channel
	 *
	 *  @return 0 in case of success or negative value in case of error.
	 *  @return -ENOMEM if no available space for new channel.
	 *  @return -EACCES if application did not authorize the connection.
	 *  @return -EPERM if encryption key size is too short.
	 */
	int (*accept)(struct bt_conn *conn, struct bt_l2cap_server *server,
		      struct bt_l2cap_chan **chan);

	sys_snode_t node;
};

/** @brief Register L2CAP server.
 *
 *  Register L2CAP server for a PSM, each new connection is authorized using
 *  the accept() callback which in case of success shall allocate the channel
 *  structure to be used by the new connection.
 *
 *  For fixed, SIG-assigned PSMs (in the range 0x0001-0x007f) the PSM should
 *  be assigned to server->psm before calling this API. For dynamic PSMs
 *  (in the range 0x0080-0x00ff) server->psm may be pre-set to a given value
 *  (this is however not recommended) or be left as 0, in which case upon
 *  return a newly allocated value will have been assigned to it. For
 *  dynamically allocated values the expectation is that it's exposed through
 *  a GATT service, and that's how L2CAP clients discover how to connect to
 *  the server.
 *
 *  @param server Server structure.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_l2cap_server_register(struct bt_l2cap_server *server);

/** @brief Register L2CAP server on BR/EDR oriented connection.
 *
 *  Register L2CAP server for a PSM, each new connection is authorized using
 *  the accept() callback which in case of success shall allocate the channel
 *  structure to be used by the new connection.
 *
 *  @param server Server structure.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_l2cap_br_server_register(struct bt_l2cap_server *server);

/** @brief Connect Enhanced Credit Based L2CAP channels
 *
 *  Connect up to 5 L2CAP channels by PSM, once the connection is completed
 *  each channel connected() callback will be called. If the connection is
 *  rejected disconnected() callback is called instead.
 *
 *  @param conn Connection object.
 *  @param chans Array of channel objects.
 *  @param psm Channel PSM to connect to.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_l2cap_ecred_chan_connect(struct bt_conn *conn,
				struct bt_l2cap_chan **chans, uint16_t psm);

/** @brief Reconfigure Enhanced Credit Based L2CAP channels
 *
 *  Reconfigure up to 5 L2CAP channels. Channels must be from the same bt_conn.
 *  Once reconfiguration is completed each channel reconfigured() callback will
 *  be called. MTU cannot be decreased on any of provided channels.
 *
 *  @param chans Array of channel objects. Null-terminated. Elements after the
 *               first 5 are silently ignored.
 *  @param mtu Channel MTU to reconfigure to.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_l2cap_ecred_chan_reconfigure(struct bt_l2cap_chan **chans, uint16_t mtu);

/** @brief Connect L2CAP channel
 *
 *  Connect L2CAP channel by PSM, once the connection is completed channel
 *  connected() callback will be called. If the connection is rejected
 *  disconnected() callback is called instead.
 *  Channel object passed (over an address of it) as second parameter shouldn't
 *  be instantiated in application as standalone. Instead of, application should
 *  create transport dedicated L2CAP objects, i.e. type of bt_l2cap_le_chan for
 *  LE and/or type of bt_l2cap_br_chan for BR/EDR. Then pass to this API
 *  the location (address) of bt_l2cap_chan type object which is a member
 *  of both transport dedicated objects.
 *
 *  @param conn Connection object.
 *  @param chan Channel object.
 *  @param psm Channel PSM to connect to.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_l2cap_chan_connect(struct bt_conn *conn, struct bt_l2cap_chan *chan,
			  uint16_t psm);

/** @brief Disconnect L2CAP channel
 *
 *  Disconnect L2CAP channel, if the connection is pending it will be
 *  canceled and as a result the channel disconnected() callback is called.
 *  Regarding to input parameter, to get details see reference description
 *  to bt_l2cap_chan_connect() API above.
 *
 *  @param chan Channel object.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_l2cap_chan_disconnect(struct bt_l2cap_chan *chan);

/** @brief Send data to L2CAP channel
 *
 *  Send data from buffer to the channel. If credits are not available, buf will
 *  be queued and sent as and when credits are received from peer.
 *  Regarding to first input parameter, to get details see reference description
 *  to bt_l2cap_chan_connect() API above.
 *
 *  When sending L2CAP data over an BR/EDR connection the application is sending
 *  L2CAP PDUs. The application is required to have reserved
 *  @ref BT_L2CAP_CHAN_SEND_RESERVE bytes in the buffer before sending.
 *  The application should use the BT_L2CAP_BUF_SIZE() helper to correctly
 *  size the buffers for the for the outgoing buffer pool.
 *
 *  When sending L2CAP data over an LE connection the application is sending
 *  L2CAP SDUs. The application shall reserve
 *  @ref BT_L2CAP_SDU_CHAN_SEND_RESERVE bytes in the buffer before sending.
 *
 *  The application can use the BT_L2CAP_SDU_BUF_SIZE() helper to correctly size
 *  the buffer to account for the reserved headroom.
 *
 *  When segmenting an L2CAP SDU into L2CAP PDUs the stack will first attempt to
 *  allocate buffers from the channel's `alloc_seg` callback and will fallback
 *  on the stack's global buffer pool (sized
 *  @kconfig{CONFIG_BT_L2CAP_TX_BUF_COUNT}).
 *
 *  @note Buffer ownership is transferred to the stack in case of success, in
 *  case of an error the caller retains the ownership of the buffer.
 *
 *  @return 0 in case of success or negative value in case of error.
 *  @return -EINVAL if `buf` or `chan` is NULL.
 *  @return -EINVAL if `chan` is not either BR/EDR or LE credit-based.
 *  @return -EINVAL if buffer doesn't have enough bytes reserved to fit header.
 *  @return -EMSGSIZE if `buf` is larger than `chan`'s MTU.
 *  @return -ENOTCONN if underlying conn is disconnected.
 *  @return -ESHUTDOWN if L2CAP channel is disconnected.
 *  @return -other (from lower layers) if chan is BR/EDR.
 */
int bt_l2cap_chan_send(struct bt_l2cap_chan *chan, struct net_buf *buf);

/** @brief Give credits to the remote
 *
 *  Only available for channels using @ref bt_l2cap_chan_ops.seg_recv.
 *  @kconfig{CONFIG_BT_L2CAP_SEG_RECV} must be enabled to make this function
 *  available.
 *
 *  Each credit given allows the peer to send one segment.
 *
 *  This function depends on a valid @p chan object. Make sure to
 *  default-initialize or memset @p chan when allocating or reusing it for new
 *  connections.
 *
 *  Adding zero credits is not allowed.
 *
 *  Credits can be given before entering the @ref BT_L2CAP_CONNECTING state.
 *  Doing so will adjust the 'initial credits' sent in the connection PDU.
 *
 *  Must not be called while the channel is in @ref BT_L2CAP_CONNECTING state.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_l2cap_chan_give_credits(struct bt_l2cap_chan *chan, uint16_t additional_credits);

/** @brief Complete receiving L2CAP channel data
 *
 * Complete the reception of incoming data. This shall only be called if the
 * channel recv callback has returned -EINPROGRESS to process some incoming
 * data. The buffer shall contain the original user_data as that is used for
 * storing the credits/segments used by the packet.
 *
 * @param chan Channel object.
 * @param buf Buffer containing the data.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_l2cap_chan_recv_complete(struct bt_l2cap_chan *chan,
				struct net_buf *buf);

#ifdef __cplusplus
}
#endif

/**
 * @}
 */

#endif /* ZEPHYR_INCLUDE_BLUETOOTH_L2CAP_H_ */