/*
 * Copyright (c) 2023 Microchip Technology Inc.
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr/dt-bindings/pwm/pwm.h>

/* MEC152x EVB
 * BBLED controller 0 uses GPIO156/LED0 connected to JP31-13
 * BBLED controller 1 uses GPIO157/LED1 connected to JP31-15
 * BBLED controller 2 uses GPIO153/LED2 connected to JP31-17
 *
 * BBLED hardware divides input clock (32KHz or 48MHz) by (256 * (prescalar+1)
 * and implements duty cycle for blink mode as an 8-bit value where 0 is off and
 * 255 full on. BBLED PWM is 8-bit.
 * BBLED-PWM driver get cycles API reports 32KHz/256 or 48M/256.
 * Due to all the above we use 50 ms for DT PWM period.
 */

/* PWM_SEC(1) PWM_USEC(7812) */
/ {
	pwmleds {
		compatible = "pwm-leds";
		/* struct pwm_dt_spec: phandle channel period(ns) flags */
		bbled_pwm0: bbled_pwm0 {
			pwms = <&bbled0 0 PWM_MSEC(50) PWM_POLARITY_NORMAL>;
		};
		bbled_pwm1: bbled_pwm1 {
			pwms = <&bbled1 0 PWM_MSEC(50) PWM_POLARITY_NORMAL>;
		};
		bbled_pwm2: bbled_pwm2 {
			pwms = <&bbled2 0 PWM_MSEC(50) PWM_POLARITY_NORMAL>;
		};
	};
};

&pinctrl {
	led0_gpio156_invert: led0_gpio156_invert {
		pinmux = <MCHP_XEC_PINMUX(0156, MCHP_AF1)>;
		microchip,output-func-invert;
	};
	led1_gpio157_invert: led1_gpio157_invert {
		pinmux = <MCHP_XEC_PINMUX(0157, MCHP_AF1)>;
		microchip,output-func-invert;
	};
	led2_gpio153_invert: led2_gpio153_invert {
		pinmux = <MCHP_XEC_PINMUX(0153, MCHP_AF1)>;
		microchip,output-func-invert;
	};
};

&bbled0 {
	compatible = "microchip,xec-pwmbbled";
	clock-select = "PWM_BBLED_CLK_32K";
	pinctrl-0 = <&led0_gpio156>;
	pinctrl-1 = <&led0_gpio156_sleep>;
	pinctrl-names = "default", "sleep";
	status = "okay";
	#pwm-cells = <3>;
};

&bbled1 {
	compatible = "microchip,xec-pwmbbled";
	clock-select = "PWM_BBLED_CLK_32K";
	pinctrl-0 = <&led1_gpio157>;
	pinctrl-1 = <&led1_gpio157_sleep>;
	pinctrl-names = "default", "sleep";
	status = "okay";
	#pwm-cells = <3>;
};

&bbled2 {
	compatible = "microchip,xec-pwmbbled";
	clock-select = "PWM_BBLED_CLK_32K";
	pinctrl-0 = <&led2_gpio153>;
	pinctrl-1 = <&led2_gpio153_sleep>;
	pinctrl-names = "default", "sleep";
	status = "okay";
	#pwm-cells = <3>;
};