# Texas Instruments SimpleLink CC13x2 / CC26x2
# Copyright (c) 2022 Vaishnav Achath
# SPDX-License-Identifier: Apache-2.0

config SOC_SERIES_CC13X2X7_CC26X2X7
	bool
	select ARM
	select CPU_CORTEX_M4
	select CPU_HAS_ARM_MPU
	select DYNAMIC_INTERRUPTS
	select CPU_CORTEX_M_HAS_DWT
	select CPU_HAS_FPU
	select HAS_CC13X2X7_CC26X2X7_SDK
	select HAS_TI_CCFG if !BOOTLOADER_MCUBOOT
	select HAS_SEGGER_RTT if ZEPHYR_SEGGER_MODULE
	select HAS_PM

menu "Customer Configuration (CCFG)"
depends on SOC_SERIES_CC13X2X7_CC26X2X7

config CC13X2_CC26X2_BOOST_MODE
	bool "Radio boost mode (VDDR_HH)"
	help
	  Enable the radio boost mode +14dBm (sets CCFG_FORCE_VDDR_HH to 1).

config CC13X2_CC26X2_HAS_CUSTOM_RF_HWATTRS
	bool "Board defines custom RFCC26XX hwAttrs structure"
	help
	  The board defines its own RFCC26XX_hwAttrs structure (e.g., for
	  custom antenna switching callback).

config CC13X2_CC26X2_BOOTLOADER_ENABLE
	bool "ROM bootloader"
	help
	  Enable the serial bootloader which resides in ROM on CC13xx / CC26xx
	  devices.

config CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE
	bool "ROM bootloader backdoor"
	depends on CC13X2_CC26X2_BOOTLOADER_ENABLE
	help
	  Enable the ROM bootloader backdoor which starts the bootloader if the
	  associated pin is at the correct logic level on reset.

config CC13X2_CC26X2_BOOTLOADER_BACKDOOR_PIN
	int "ROM bootloader backdoor pin"
	depends on CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE
	range 0 255
	default 255
	help
	  Set the pin that is level checked if the bootloader backdoor is
	  enabled.

config CC13X2_CC26X2_BOOTLOADER_BACKDOOR_LEVEL
	int "ROM bootloader backdoor level"
	depends on CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE
	range 0 1
	default 0
	help
	  Set the active level of the pin selected for the bootloader backdoor.

config CC13X2_CC26X2_XOSC_CAPARRAY_DELTA
	hex "Cap array tuning delta"
	range 0 0xFF
	default 0xD5
	help
	  Enable a specific cap array tunning delta.

endmenu