/*
 * Copyright 2024 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <mem.h>
#include <zephyr/dt-bindings/clock/mcux_lpc_syscon_clock.h>
#include <zephyr/dt-bindings/gpio/gpio.h>
#include <arm/armv8-m.dtsi>
#include <zephyr/dt-bindings/memory-attr/memory-attr-arm.h>

/ {
	cpus: cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			compatible = "arm,cortex-m33f";
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <1>;

			mpu: mpu@e000ed90 {
				compatible = "arm,armv8m-mpu";
				reg = <0xe000ed90 0x40>;
			};
		};
		cpu@1 {
			compatible = "arm,cortex-m33";
			reg = <1>;
		};
	};

	/* Dummy pinctrl node, filled with pin mux options at board level */
	pinctrl: pinctrl {
		compatible = "nxp,kinetis-pinctrl";
		status = "okay";
	};
};

&sram {
	#address-cells = <1>;
	#size-cells = <1>;

	sramx: memory@4000000 {
		compatible =  "zephyr,memory-region", "mmio-sram";
		reg = <0x4000000 DT_SIZE_K(96)>;
		zephyr,memory-region = "SRAM1";
		zephyr,memory-attr = <( DT_MEM_ARM(ATTR_MPU_RAM) )>;
	};

	/* mcxn94x Memory configurations:
	 *
	 * RAM blocks RAMA through SRAM4 are contiguous address ranges
	 *
	 * MCXN94X: 512KB RAM, RAMX: 96K, RAMA: 32K, RAMB: 32K,
	 *                     RAMC: 64K, RAMD: 64K, RAME: 64K
	 *                     RAMF: 64K, RAMG: 64K, RAMH: 32K
	 */
	sram0: memory@20000000 {
		compatible = "mmio-sram";
		reg = <0x20000000 DT_SIZE_K(416)>;
	};
};

&peripheral {
	#address-cells = <1>;
	#size-cells = <1>;

	syscon: syscon@0 {
		compatible = "nxp,lpc-syscon";
		reg = <0x0 0x4000>;
		#clock-cells = <1>;
	};

	porta: pinmux@116000 {
		compatible = "nxp,kinetis-pinmux";
		reg = <0x116000 0x1000>;
		clocks = <&syscon MCUX_PORT0_CLK>;
	};

	portb: pinmux@117000 {
		compatible = "nxp,kinetis-pinmux";
		reg = <0x117000 0x1000>;
		clocks = <&syscon MCUX_PORT1_CLK>;
	};

	portc: pinmux@118000 {
		compatible = "nxp,kinetis-pinmux";
		reg = <0x118000 0x1000>;
		clocks = <&syscon MCUX_PORT2_CLK>;
	};

	portd: pinmux@119000 {
		compatible = "nxp,kinetis-pinmux";
		reg = <0x119000 0x1000>;
		clocks = <&syscon MCUX_PORT3_CLK>;
	};

	porte: pinmux@11a000 {
		compatible = "nxp,kinetis-pinmux";
		reg = <0x11a000 0x1000>;
		clocks = <&syscon MCUX_PORT4_CLK>;
	};

	portf: pinmux@42000 {
		compatible = "nxp,kinetis-pinmux";
		reg = <0x42000 0x1000>;
		clocks = <&syscon MCUX_PORT5_CLK>;
	};

	gpio0: gpio@96000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x96000 0x1000>;
		interrupts = <17 0>,<18 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&porta>;
	};

	gpio1: gpio@98000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x98000 0x1000>;
		interrupts = <19 0>,<20 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&portb>;
	};

	gpio2: gpio@9a000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x9a000 0x1000>;
		interrupts = <21 0>,<22 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&portc>;
	};

	gpio3: gpio@9c000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x9c000 0x1000>;
		interrupts = <23 0>,<24 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&portd>;
	};

	gpio4: gpio@9e000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x9e000 0x1000>;
		interrupts = <25 0>,<26 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&porte>;
	};

	gpio5: gpio@40000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x40000 0x1000>;
		interrupts = <27 0>,<28 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&portf>;
	};

	flexcomm0: flexcomm@92000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0x92000 0x1000>;
		interrupts = <35 0>;
		status = "disabled";

		/* Empty ranges property implies parent and child address space is identical */
		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm0_lpuart0: lpuart@92000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x92000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM0_CLK>;
			status = "disabled";
		};
		flexcomm0_lpspi0: lpspi@92000 {
			compatible = "nxp,imx-lpspi";
			reg = <0x92000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM0_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm0_lpi2c0: lpi2c@92800 {
			compatible = "nxp,imx-lpi2c";
			reg = <0x92800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM0_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm1: flexcomm@93000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0x93000 0x1000>;
		interrupts = <36 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm1_lpuart1: lpuart@93000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x93000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM1_CLK>;
			/* DMA channels 0 and 1, muxed to LPUART1 RX and TX */
			dmas = <&edma0 0 71>, <&edma0 1 72>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm1_lpspi1: lpspi@93000 {
			compatible = "nxp,imx-lpspi";
			reg = <0x93000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM1_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			/* DMA channels 0 and 1, muxed to LPSPI1 RX and TX */
			dmas = <&edma0 0 71>, <&edma0 1 72>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm1_lpi2c1: lpi2c@93800 {
			compatible = "nxp,imx-lpi2c";
			reg = <0x93800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM1_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm2: flexcomm@94000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0x94000 0x1000>;
		interrupts = <37 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm2_lpuart2: lpuart@94000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x94000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM2_CLK>;
			/* DMA channels 4 and 5, muxed to LPUART2 RX and TX */
			dmas = <&edma0 4 73>, <&edma0 5 74>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm2_lpspi2: lpspi@94000 {
			compatible = "nxp,imx-lpspi";
			reg = <0x94000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM2_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			/* DMA channels 4 and 5, muxed to LPSPI2 RX and TX */
			dmas = <&edma0 4 73>, <&edma0 5 74>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm2_lpi2c2: lpi2c@94800 {
			compatible = "nxp,imx-lpi2c";
			reg = <0x94800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM2_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm3: flexcomm@95000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0x95000 0x1000>;
		interrupts = <38 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm3_lpuart3: lpuart@95000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x95000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM3_CLK>;
			status = "disabled";
		};
		flexcomm3_lpspi3: lpspi@95000 {
			compatible = "nxp,imx-lpspi";
			reg = <0x95000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM3_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm3_lpi2c3: lpi2c@95800 {
			compatible = "nxp,imx-lpi2c";
			reg = <0x95800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM3_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm4: flexcomm@b4000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0xb4000 0x1000>;
		interrupts = <39 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm4_lpuart4: lpuart@b4000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0xb4000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM4_CLK>;
			/* DMA channels 2 and 3, muxed to LPUART4 RX and TX */
			dmas = <&edma0 2 77>, <&edma0 3 78>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm4_lpspi4: lpspi@b4000 {
			compatible = "nxp,imx-lpspi";
			reg = <0xb4000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM4_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			/* DMA channels 2 and 3, muxed to LPSPI4 RX and TX */
			dmas = <&edma0 2 77>, <&edma0 3 78>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm4_lpi2c4: lpi2c@b4800 {
			compatible = "nxp,imx-lpi2c";
			reg = <0xb4800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM4_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm5: flexcomm@b5000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0xb5000 0x1000>;
		interrupts = <40 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm5_lpuart5: lpuart@b5000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0xb5000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM5_CLK>;
			status = "disabled";
		};
		flexcomm5_lpspi5: lpspi@b5000 {
			compatible = "nxp,imx-lpspi";
			reg = <0xb5000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM5_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm5_lpi2c5: lpi2c@b5800 {
			compatible = "nxp,imx-lpi2c";
			reg = <0xb5800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM5_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm6: flexcomm@b6000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0xb6000 0x1000>;
		interrupts = <41 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm6_lpuart6: lpuart@b6000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0xb6000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM6_CLK>;
			status = "disabled";
		};
		flexcomm6_lpspi6: lpspi@b6000 {
			compatible = "nxp,imx-lpspi";
			reg = <0xb6000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM6_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm6_lpi2c6: lpi2c@b6800 {
			compatible = "nxp,imx-lpi2c";
			reg = <0xb6800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM6_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm7: flexcomm@b7000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0xb7000 0x1000>;
		interrupts = <42 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm7_lpuart7: lpuart@b7000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0xb7000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM7_CLK>;
			status = "disabled";
		};
		flexcomm7_lpspi7: lpspi@b7000 {
			compatible = "nxp,imx-lpspi";
			reg = <0xb7000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM7_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm7_lpi2c7: lpi2c@b7800 {
			compatible = "nxp,imx-lpi2c";
			reg = <0xb7800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM7_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm8: flexcomm@b8000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0xb8000 0x1000>;
		interrupts = <43 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm8_lpuart8: lpuart@b8000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0xb8000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM8_CLK>;
			status = "disabled";
		};
		flexcomm8_lpspi8: lpspi@b8000 {
			compatible = "nxp,imx-lpspi";
			reg = <0xb8000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM8_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm8_lpi2c8: lpi2c@b8800 {
			compatible = "nxp,imx-lpi2c";
			reg = <0xb8800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM8_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm9: flexcomm@b9000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0xb9000 0x1000>;
		interrupts = <44 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm9_lpuart9: lpuart@b9000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0xb9000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM9_CLK>;
			status = "disabled";
		};
		flexcomm9_lpspi9: lpspi@b9000 {
			compatible = "nxp,imx-lpspi";
			reg = <0xb9000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM9_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm9_lpi2c9: lpi2c@b9800 {
			compatible = "nxp,imx-lpi2c";
			reg = <0xb9800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM9_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	edma0: dma-controller@80000 {
		#dma-cells = <2>;
		compatible = "nxp,mcux-edma-v4";
		dma-channels = <16>;
		dma-requests = <120>;

		reg = <0x80000 0x1000>;
		interrupts = <1 0>, <2 0>, <3 0>, <4 0>,
			<5 0>, <6 0>, <7 0>, <8 0>,
			<9 0>, <10 0>, <11 0>, <12 0>,
			<13 0>, <14 0>, <15 0>, <16 0>;
		no-error-irq;
		status = "disabled";
	};

	edma1: dma-controller@a0000 {
		#dma-cells = <2>;
		compatible = "nxp,mcux-edma-v4";
		dma-channels = <16>;
		dma-requests = <120>;

		reg = <0xa0000 0x1000>;
		interrupts = <77 0>, <78 0>, <79 0>, <80 0>,
			<81 0>, <82 0>, <83 0>, <84 0>,
			<85 0>, <86 0>, <87 0>, <88 0>,
			<89 0>, <90 0>, <91 0>, <92 0>;
		no-error-irq;
		status = "disabled";
	};

	fmu: flash-controller@43000 {
		compatible = "nxp,iap-msf1";
		reg = <0x43000 0x1000>;
		interrupts = <138 0>;
		status = "disabled";

		#address-cells = <1>;
		#size-cells = <1>;

		flash: flash@0 {
			compatible = "soc-nv-flash";
			reg = <0 DT_SIZE_M(2)>;
			erase-block-size = <8192>;
			write-block-size = <16>;
		};
	};

	os_timer: timers@49000 {
		compatible = "nxp,os-timer";
		reg = <0x49000 0x1000>;
		interrupts = <57 0>;
		status = "disabled";
	};

	dac0: dac@10f000 {
		compatible = "nxp,lpdac";
		reg = < 0x10f000 0x1000>;
		interrupts = <106 0>;
		status = "disabled";
		voltage-reference = <0>;
		#io-channel-cells = <1>;
	};

	dac1: dac@112000 {
		compatible = "nxp,lpdac";
		reg = < 0x112000 0x1000>;
		interrupts = <107 0>;
		status = "disabled";
		voltage-reference = <0>;
		#io-channel-cells = <1>;
	};

	enet: ethernet@40100000 {
		compatible = "nxp,enet-qos";
		reg = <0x40100000 0x1200>;
		clocks = <&syscon MCUX_ENET_QOS_CLK>;
		enet_mac: ethernet {
			compatible = "nxp,enet-qos-mac";
			status = "disabled";
			interrupts = <139 0>, <140 0>, <141 0>;
			interrupt-names = "mac", "power", "lpi";
		};
		enet_mdio: mdio {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "nxp,enet-qos-mdio";
			status = "disabled";
		};
	};

	wwdt0: watchdog@16000 {
		compatible = "nxp,lpc-wwdt";
		reg = <0x16000 0x1000>;
		interrupts = <152 0>;
		status = "disabled";
		clk-divider = <1>;
	};

	flexpwm0: flexpwm@ce000 {
		compatible = "nxp,flexpwm";
		reg = <0xce000 0x1000>;
		interrupt-names = "RELOAD-ERROR", "FAULT";
		interrupts = <112 0>, <113 0>;
		flexpwm0_pwm0: pwm0 {
			compatible = "nxp,imx-pwm";
			index = <0>;
			interrupts = <114 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm0_pwm1: pwm1 {
			compatible = "nxp,imx-pwm";
			index = <1>;
			interrupts = <115 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm0_pwm2: pwm2 {
			compatible = "nxp,imx-pwm";
			index = <2>;
			interrupts = <116 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm0_pwm3: pwm3 {
			compatible = "nxp,imx-pwm";
			index = <3>;
			interrupts = <117 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};
	};

	flexpwm1: flexpwm@d0000 {
		compatible = "nxp,flexpwm";
		reg = <0xd0000 0x1000>;
		interrupt-names = "RELOAD-ERROR", "FAULT";
		interrupts = <118 0>, <119 0>;
		flexpwm1_pwm0: pwm0 {
			compatible = "nxp,imx-pwm";
			index = <0>;
			interrupts = <120 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm1_pwm1: pwm1 {
			compatible = "nxp,imx-pwm";
			index = <1>;
			interrupts = <121 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm1_pwm2: pwm2 {
			compatible = "nxp,imx-pwm";
			index = <2>;
			interrupts = <122 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm1_pwm3: pwm3 {
			compatible = "nxp,imx-pwm";
			index = <3>;
			interrupts = <123 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};
	};
};

&systick {
	/*
	 * MCXN94X relies by default on the OS Timer for system clock
	 * implementation, so the SysTick node is not to be enabled.
	 */
	status = "disabled";
};

&flexspi {
	compatible = "nxp,imx-flexspi";
	interrupts = <58 0>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "disabled";
	clocks = <&syscon MCUX_FLEXSPI_CLK>;
};

&nvic {
	arm,num-irq-priority-bits = <3>;
};