| /* ENC28J60 Stand-alone Ethernet Controller with SPI |
| * |
| * Copyright (c) 2016 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <kernel.h> |
| #include <gpio.h> |
| |
| #ifndef _ENC28J60_ |
| #define _ENC28J60_ |
| |
| /* Any Bank Registers */ |
| #define ENC28J60_REG_EIE 0x1B |
| #define ENC28J60_REG_EIR 0x1C |
| #define ENC28J60_REG_ESTAT 0x1D |
| #define ENC28J60_REG_ECON2 0x1E |
| #define ENC28J60_REG_ECON1 0x1F |
| |
| /* Register Encoding |
| * Nibble 3 : 0x0 ETH Register |
| * 0x1 MAC Register |
| * 0x2 MII Register |
| * Nibble 2 : Bank number |
| * Nibble 1-0: Register address |
| */ |
| |
| /* Bank 0 Registers */ |
| #define ENC28J60_REG_ERDPTL 0x0000 |
| #define ENC28J60_REG_ERDPTH 0x0001 |
| #define ENC28J60_REG_EWRPTL 0x0002 |
| #define ENC28J60_REG_EWRPTH 0x0003 |
| #define ENC28J60_REG_ETXSTL 0x0004 |
| #define ENC28J60_REG_ETXSTH 0x0005 |
| #define ENC28J60_REG_ETXNDL 0x0006 |
| #define ENC28J60_REG_ETXNDH 0x0007 |
| #define ENC28J60_REG_ERXSTL 0x0008 |
| #define ENC28J60_REG_ERXSTH 0x0009 |
| #define ENC28J60_REG_ERXNDL 0x000A |
| #define ENC28J60_REG_ERXNDH 0x000B |
| #define ENC28J60_REG_ERXRDPTL 0x000C |
| #define ENC28J60_REG_ERXRDPTH 0x000D |
| #define ENC28J60_REG_ERXWRPTL 0x000E |
| #define ENC28J60_REG_ERXWRPTH 0x000F |
| #define ENC28J60_REG_EDMASTL 0x0010 |
| #define ENC28J60_REG_EDMASTH 0x0011 |
| #define ENC28J60_REG_EDMANDL 0x0012 |
| #define ENC28J60_REG_EDMANDH 0x0013 |
| #define ENC28J60_REG_EDMADSTL 0x0014 |
| #define ENC28J60_REG_EDMADSTH 0x0015 |
| #define ENC28J60_REG_EDMACSL 0x0016 |
| #define ENC28J60_REG_EDMACSH 0x0017 |
| |
| /* Bank 1 Registers */ |
| #define ENC28J60_REG_EHT0 0x0100 |
| #define ENC28J60_REG_EHT1 0x0101 |
| #define ENC28J60_REG_EHT2 0x0102 |
| #define ENC28J60_REG_EHT3 0x0103 |
| #define ENC28J60_REG_EHT4 0x0104 |
| #define ENC28J60_REG_EHT5 0x0105 |
| #define ENC28J60_REG_EHT6 0x0106 |
| #define ENC28J60_REG_EHT7 0x0107 |
| #define ENC28J60_REG_EPMM0 0x0108 |
| #define ENC28J60_REG_EPMM1 0x0109 |
| #define ENC28J60_REG_EPMM2 0x010A |
| #define ENC28J60_REG_EPMM3 0x010B |
| #define ENC28J60_REG_EPMM4 0x010C |
| #define ENC28J60_REG_EPMM5 0x010D |
| #define ENC28J60_REG_EPMM6 0x010E |
| #define ENC28J60_REG_EPMM7 0x010F |
| #define ENC28J60_REG_EPMCSL 0x0110 |
| #define ENC28J60_REG_EPMCSH 0x0111 |
| #define ENC28J60_REG_EPMOL 0x0114 |
| #define ENC28J60_REG_EPMOH 0x0115 |
| #define ENC28J60_REG_EWOLIE 0x0116 |
| #define ENC28J60_REG_EWOLIR 0x0117 |
| #define ENC28J60_REG_ERXFCON 0x0118 |
| #define ENC28J60_REG_EPKTCNT 0x0119 |
| |
| /* Bank 2 Registers */ |
| #define ENC28J60_REG_MACON1 0x1200 |
| #define ENC28J60_REG_MACON3 0x1202 |
| #define ENC28J60_REG_MACON4 0x1203 |
| #define ENC28J60_REG_MABBIPG 0x1204 |
| #define ENC28J60_REG_MAIPGL 0x1206 |
| #define ENC28J60_REG_MAIPGH 0x1207 |
| #define ENC28J60_REG_MACLCON1 0x1208 |
| #define ENC28J60_REG_MACLCON2 0x1209 |
| #define ENC28J60_REG_MAMXFLL 0x120A |
| #define ENC28J60_REG_MAMXFLH 0x120B |
| #define ENC28J60_REG_MAPHSUP 0x120C |
| #define ENC28J60_REG_MICON 0x2211 |
| #define ENC28J60_REG_MICMD 0x2212 |
| #define ENC28J60_REG_MIREGADR 0x2214 |
| #define ENC28J60_REG_MIWRL 0x2216 |
| #define ENC28J60_REG_MIWRH 0x2217 |
| #define ENC28J60_REG_MIRDL 0x2218 |
| #define ENC28J60_REG_MIRDH 0x2219 |
| |
| /* Bank 3 Registers */ |
| #define ENC28J60_REG_MAADR1 0x1300 |
| #define ENC28J60_REG_MAADR0 0x1301 |
| #define ENC28J60_REG_MAADR3 0x1302 |
| #define ENC28J60_REG_MAADR2 0x1303 |
| #define ENC28J60_REG_MAADR5 0x1304 |
| #define ENC28J60_REG_MAADR4 0x1305 |
| #define ENC28J60_REG_EBSTSD 0x0306 |
| #define ENC28J60_REG_EBSTCON 0x0307 |
| #define ENC28J60_REG_EBSTCSL 0x0308 |
| #define ENC28J60_REG_EBSTCSH 0x0309 |
| #define ENC28J60_REG_MISTAT 0x230A |
| #define ENC28J60_REG_EREVID 0x0312 |
| #define ENC28J60_REG_ECOCON 0x0315 |
| #define ENC28J60_REG_EFLOCON 0x0317 |
| #define ENC28J60_REG_EPAUSL 0x0318 |
| #define ENC28J60_REG_EPAUSH 0x0319 |
| |
| /* PHY Registers */ |
| #define ENC28J60_PHY_PHCON1 0x00 |
| #define ENC28J60_PHY_PHSTAT1 0x01 |
| #define ENC28J60_PHY_PHID1 0x02 |
| #define ENC28J60_PHY_PHID2 0x03 |
| #define ENC28J60_PHY_PHCON2 0x10 |
| #define ENC28J60_PHY_PHSTAT2 0x11 |
| #define ENC28J60_PHY_PHIE 0x12 |
| #define ENC28J60_PHY_PHIR 0x13 |
| #define ENC28J60_PHY_PHLCON 0x14 |
| |
| /* SPI Instruction Opcodes */ |
| #define ENC28J60_SPI_RCR (0x0) |
| #define ENC28J60_SPI_RBM (0x3A) |
| #define ENC28J60_SPI_WCR (0x2 << 5) |
| #define ENC28J60_SPI_WBM (0x7A) |
| #define ENC28J60_SPI_BFS (0x4 << 5) |
| #define ENC28J60_SPI_BFC (0x5 << 5) |
| #define ENC28J60_SPI_SC (0xFF) |
| |
| /* Significant bits */ |
| #define ENC28J60_BIT_MICMD_MIIRD (0x01) |
| #define ENC28J60_BIT_MISTAT_BUSY (0x01) |
| #define ENC28J60_BIT_ESTAT_CLKRDY (0x01) |
| #define ENC28J60_BIT_MACON1_MARXEN (0x01) |
| #define ENC28J60_BIT_MACON1_RXPAUS (0x04) |
| #define ENC28J60_BIT_MACON1_TXPAUS (0x08) |
| #define ENC28J60_BIT_MACON1_MARXEN (0x01) |
| #define ENC28J60_BIT_MACON2_MARST (0x80) |
| #define ENC28J60_BIT_MACON3_FULDPX (0x01) |
| #define ENC28J60_BIT_ECON1_TXRST (0x80) |
| #define ENC28J60_BIT_ECON1_TXRTS (0x08) |
| #define ENC28J60_BIT_ECON1_RXEN (0x04) |
| #define ENC28J60_BIT_ECON2_PKTDEC (0x40) |
| #define ENC28J60_BIT_EIR_PKTIF (0x40) |
| #define ENC28J60_BIT_EIE_TXIE (0x08) |
| #define ENC28J60_BIT_EIE_PKTIE (0x40) |
| #define ENC28J60_BIT_EIE_INTIE (0x80) |
| #define ENC28J60_BIT_EIR_PKTIF (0x40) |
| #define ENC28J60_BIT_EIR_DMAIF (0x20) |
| #define ENC28J60_BIT_EIR_LINKIF (0x10) |
| #define ENC28J60_BIT_EIR_TXIF (0x08) |
| #define ENC28J60_BIT_EIR_WOLIF (0x04) |
| #define ENC28J60_BIT_EIR_TXERIF (0x02) |
| #define ENC28J60_BIT_EIR_RXERIF (0x01) |
| #define ENC28J60_BIT_ESTAT_TXABRT (0x02) |
| #define ENC28J60_BIT_ESTAT_LATECOL (0x10) |
| #define ENC28J60_BIT_PHCON1_PDPXMD (0x0100) |
| #define ENC28J60_BIT_PHCON2_HDLDIS (0x0001) |
| |
| /* Driver Static Configuration */ |
| |
| /* Receive filters enabled: |
| * - Unicast |
| * - Multicast |
| * - Broadcast |
| * - CRC Check |
| */ |
| #define ENC28J60_RECEIVE_FILTERS 0xA3 |
| |
| /* MAC configuration: |
| * - Automatic Padding |
| * - Automatic CRC |
| * - Frame Length Checking |
| */ |
| #define ENC28J60_MAC_CONFIG 0x32 |
| #define ENC28J60_MAC_BBIPG_HD 0x12 |
| #define ENC28J60_MAC_BBIPG_FD 0x15 |
| #define ENC28J60_MAC_NBBIPGL 0x12 |
| #define ENC28J60_MAC_NBBIPGH 0x0C |
| #define ENC28J60_PHY_LEDCONF 0x3422 |
| /* Status Vector size plus per packet control byte: 8 bytes */ |
| #define ENC28J60_SV_SIZE 8 |
| /* Per Packet Control Byte configured to follow MACON3 configuration */ |
| #define ENC28J60_PPCTL_BYTE 0x0 |
| |
| /* Start of RX buffer, (must be zero, Rev. B4 Errata point 5) */ |
| #define ENC28J60_RXSTART 0x0000 |
| /* End of RX buffer, room for 2 packets */ |
| #define ENC28J60_RXEND 0x0BFF |
| |
| /* Start of TX buffer, room for 1 packet */ |
| #define ENC28J60_TXSTART 0x0C00 |
| /* End of TX buffer */ |
| #define ENC28J60_TXEND 0x11FF |
| |
| /* Status vectors array size */ |
| #define TSV_SIZE 7 |
| #define RSV_SIZE 4 |
| |
| /* Microchip's OUI*/ |
| #define MICROCHIP_OUI_B0 0x00 |
| #define MICROCHIP_OUI_B1 0x04 |
| #define MICROCHIP_OUI_B2 0xA3 |
| |
| #define MAX_BUFFER_LENGTH 128 |
| |
| struct eth_enc28j60_config { |
| const char *gpio_port; |
| u8_t gpio_pin; |
| const char *spi_port; |
| u32_t spi_freq; |
| u8_t spi_slave; |
| u8_t full_duplex; |
| s32_t timeout; |
| }; |
| |
| struct eth_enc28j60_runtime { |
| struct net_if *iface; |
| K_THREAD_STACK_MEMBER(thread_stack, |
| CONFIG_ETH_ENC28J60_RX_THREAD_STACK_SIZE); |
| struct k_thread thread; |
| struct device *gpio; |
| struct device *spi; |
| struct gpio_callback gpio_cb; |
| u8_t mem_buf[MAX_BUFFER_LENGTH + 1]; |
| u8_t tx_tsv[TSV_SIZE]; |
| u8_t rx_rsv[RSV_SIZE]; |
| struct k_sem tx_rx_sem; |
| struct k_sem int_sem; |
| struct k_sem spi_sem; |
| }; |
| |
| #endif /*_ENC28J60_*/ |