.. _bcm958402m2_m7:

Broadcom BCM958402M2 (Cortex-M7)
################################

Overview
********
The Broadcom bcm958402m2_m7 board utilizes the Viper BCM58402_M7 SoC to
provide support for PCIe offload engine functionality.

Hardware
********
The bcm958402m2_m7 is a PCIe card with the following physical features:

* PCIe Gen4 interface
* RS232 UART (optionally populated)
* JTAG (optionally populated)

Supported Features
==================
The Broadcom bcm958402m2_m7 board configuration supports the following
hardware features:

+-----------+------------+--------------------------------------+
| Interface | Controller | Driver/Component                     |
+===========+============+======================================+
| NVIC      | on-chip    | nested vectored interrupt controller |
+-----------+------------+--------------------------------------+
| UART      | on-chip    | Compatible with UART NS16550         |
+-----------+------------+--------------------------------------+

Other hardware features have not been enabled yet for this board.

The default configuration can be found in the defconfig file:

        ``boards/arm/bcm958402m2_m7/bcm958402m2_m7_defconfig``

Programming and Debugging
*************************

Flashing
========

The flash on board is not supported by Zephyr at this time.
Board is booted over PCIe interface.

Debugging
=========
The bcm958402m2_m7 board includes pads for soldering a JTAG connector.
Zephyr applications running on the M7 core can also be tested
by observing UART console output.