| /* h4.c - H:4 UART based Bluetooth driver */ |
| |
| /* |
| * Copyright (c) 2015-2016 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <errno.h> |
| #include <stddef.h> |
| |
| #include <zephyr/kernel.h> |
| #include <zephyr/arch/cpu.h> |
| |
| #include <zephyr/init.h> |
| #include <zephyr/drivers/uart.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/sys/byteorder.h> |
| #include <string.h> |
| |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/hci.h> |
| #include <zephyr/drivers/bluetooth.h> |
| |
| #define LOG_LEVEL CONFIG_BT_HCI_DRIVER_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(bt_driver); |
| |
| #include "common/bt_str.h" |
| |
| #include "../util.h" |
| |
| #define DT_DRV_COMPAT zephyr_bt_hci_uart |
| |
| struct h4_data { |
| struct { |
| struct net_buf *buf; |
| struct k_fifo fifo; |
| |
| uint16_t remaining; |
| uint16_t discard; |
| |
| bool have_hdr; |
| bool discardable; |
| |
| uint8_t hdr_len; |
| |
| uint8_t type; |
| union { |
| struct bt_hci_evt_hdr evt; |
| struct bt_hci_acl_hdr acl; |
| struct bt_hci_iso_hdr iso; |
| uint8_t hdr[4]; |
| }; |
| } rx; |
| |
| struct { |
| uint8_t type; |
| struct net_buf *buf; |
| struct k_fifo fifo; |
| } tx; |
| |
| bt_hci_recv_t recv; |
| }; |
| |
| struct h4_config { |
| const struct device *uart; |
| k_thread_stack_t *rx_thread_stack; |
| size_t rx_thread_stack_size; |
| struct k_thread *rx_thread; |
| }; |
| |
| static inline void h4_get_type(const struct device *dev) |
| { |
| const struct h4_config *cfg = dev->config; |
| struct h4_data *h4 = dev->data; |
| |
| /* Get packet type */ |
| if (uart_fifo_read(cfg->uart, &h4->rx.type, 1) != 1) { |
| LOG_WRN("Unable to read H:4 packet type"); |
| h4->rx.type = BT_HCI_H4_NONE; |
| return; |
| } |
| |
| switch (h4->rx.type) { |
| case BT_HCI_H4_EVT: |
| h4->rx.remaining = sizeof(h4->rx.evt); |
| h4->rx.hdr_len = h4->rx.remaining; |
| break; |
| case BT_HCI_H4_ACL: |
| h4->rx.remaining = sizeof(h4->rx.acl); |
| h4->rx.hdr_len = h4->rx.remaining; |
| break; |
| case BT_HCI_H4_ISO: |
| if (IS_ENABLED(CONFIG_BT_ISO)) { |
| h4->rx.remaining = sizeof(h4->rx.iso); |
| h4->rx.hdr_len = h4->rx.remaining; |
| break; |
| } |
| __fallthrough; |
| default: |
| LOG_ERR("Unknown H:4 type 0x%02x", h4->rx.type); |
| h4->rx.type = BT_HCI_H4_NONE; |
| } |
| } |
| |
| static void h4_read_hdr(const struct device *dev) |
| { |
| const struct h4_config *cfg = dev->config; |
| struct h4_data *h4 = dev->data; |
| int bytes_read = h4->rx.hdr_len - h4->rx.remaining; |
| int ret; |
| |
| ret = uart_fifo_read(cfg->uart, h4->rx.hdr + bytes_read, h4->rx.remaining); |
| if (unlikely(ret < 0)) { |
| LOG_ERR("Unable to read from UART (ret %d)", ret); |
| } else { |
| h4->rx.remaining -= ret; |
| } |
| } |
| |
| static inline void get_acl_hdr(const struct device *dev) |
| { |
| struct h4_data *h4 = dev->data; |
| |
| h4_read_hdr(dev); |
| |
| if (!h4->rx.remaining) { |
| struct bt_hci_acl_hdr *hdr = &h4->rx.acl; |
| |
| h4->rx.remaining = sys_le16_to_cpu(hdr->len); |
| LOG_DBG("Got ACL header. Payload %u bytes", h4->rx.remaining); |
| h4->rx.have_hdr = true; |
| } |
| } |
| |
| static inline void get_iso_hdr(const struct device *dev) |
| { |
| struct h4_data *h4 = dev->data; |
| |
| h4_read_hdr(dev); |
| |
| if (!h4->rx.remaining) { |
| struct bt_hci_iso_hdr *hdr = &h4->rx.iso; |
| |
| h4->rx.remaining = bt_iso_hdr_len(sys_le16_to_cpu(hdr->len)); |
| LOG_DBG("Got ISO header. Payload %u bytes", h4->rx.remaining); |
| h4->rx.have_hdr = true; |
| } |
| } |
| |
| static inline void get_evt_hdr(const struct device *dev) |
| { |
| struct h4_data *h4 = dev->data; |
| |
| struct bt_hci_evt_hdr *hdr = &h4->rx.evt; |
| |
| h4_read_hdr(dev); |
| |
| if (h4->rx.hdr_len == sizeof(*hdr) && h4->rx.remaining < sizeof(*hdr)) { |
| switch (h4->rx.evt.evt) { |
| case BT_HCI_EVT_LE_META_EVENT: |
| h4->rx.remaining++; |
| h4->rx.hdr_len++; |
| break; |
| #if defined(CONFIG_BT_CLASSIC) |
| case BT_HCI_EVT_INQUIRY_RESULT_WITH_RSSI: |
| case BT_HCI_EVT_EXTENDED_INQUIRY_RESULT: |
| h4->rx.discardable = true; |
| break; |
| #endif |
| } |
| } |
| |
| if (!h4->rx.remaining) { |
| if (h4->rx.evt.evt == BT_HCI_EVT_LE_META_EVENT && |
| (h4->rx.hdr[sizeof(*hdr)] == BT_HCI_EVT_LE_ADVERTISING_REPORT)) { |
| LOG_DBG("Marking adv report as discardable"); |
| h4->rx.discardable = true; |
| } |
| |
| h4->rx.remaining = hdr->len - (h4->rx.hdr_len - sizeof(*hdr)); |
| LOG_DBG("Got event header. Payload %u bytes", hdr->len); |
| h4->rx.have_hdr = true; |
| } |
| } |
| |
| |
| static inline void copy_hdr(struct h4_data *h4) |
| { |
| net_buf_add_mem(h4->rx.buf, h4->rx.hdr, h4->rx.hdr_len); |
| } |
| |
| static void reset_rx(struct h4_data *h4) |
| { |
| h4->rx.type = BT_HCI_H4_NONE; |
| h4->rx.remaining = 0U; |
| h4->rx.have_hdr = false; |
| h4->rx.hdr_len = 0U; |
| h4->rx.discardable = false; |
| } |
| |
| static struct net_buf *get_rx(struct h4_data *h4, k_timeout_t timeout) |
| { |
| LOG_DBG("type 0x%02x, evt 0x%02x", h4->rx.type, h4->rx.evt.evt); |
| |
| switch (h4->rx.type) { |
| case BT_HCI_H4_EVT: |
| return bt_buf_get_evt(h4->rx.evt.evt, h4->rx.discardable, timeout); |
| case BT_HCI_H4_ACL: |
| return bt_buf_get_rx(BT_BUF_ACL_IN, timeout); |
| case BT_HCI_H4_ISO: |
| if (IS_ENABLED(CONFIG_BT_ISO)) { |
| return bt_buf_get_rx(BT_BUF_ISO_IN, timeout); |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static void rx_thread(void *p1, void *p2, void *p3) |
| { |
| const struct device *dev = p1; |
| const struct h4_config *cfg = dev->config; |
| struct h4_data *h4 = dev->data; |
| struct net_buf *buf; |
| |
| ARG_UNUSED(p2); |
| ARG_UNUSED(p3); |
| |
| LOG_DBG("started"); |
| |
| while (1) { |
| LOG_DBG("rx.buf %p", h4->rx.buf); |
| |
| /* We can only do the allocation if we know the initial |
| * header, since Command Complete/Status events must use the |
| * original command buffer (if available). |
| */ |
| if (h4->rx.have_hdr && !h4->rx.buf) { |
| h4->rx.buf = get_rx(h4, K_FOREVER); |
| LOG_DBG("Got rx.buf %p", h4->rx.buf); |
| if (h4->rx.remaining > net_buf_tailroom(h4->rx.buf)) { |
| LOG_ERR("Not enough space in buffer"); |
| h4->rx.discard = h4->rx.remaining; |
| reset_rx(h4); |
| } else { |
| copy_hdr(h4); |
| } |
| } |
| |
| /* Let the ISR continue receiving new packets */ |
| uart_irq_rx_enable(cfg->uart); |
| |
| buf = k_fifo_get(&h4->rx.fifo, K_FOREVER); |
| do { |
| uart_irq_rx_enable(cfg->uart); |
| |
| LOG_DBG("Calling bt_recv(%p)", buf); |
| h4->recv(dev, buf); |
| |
| /* Give other threads a chance to run if the ISR |
| * is receiving data so fast that rx.fifo never |
| * or very rarely goes empty. |
| */ |
| k_yield(); |
| |
| uart_irq_rx_disable(cfg->uart); |
| buf = k_fifo_get(&h4->rx.fifo, K_NO_WAIT); |
| } while (buf); |
| } |
| } |
| |
| static size_t h4_discard(const struct device *uart, size_t len) |
| { |
| uint8_t buf[33]; |
| int err; |
| |
| err = uart_fifo_read(uart, buf, MIN(len, sizeof(buf))); |
| if (unlikely(err < 0)) { |
| LOG_ERR("Unable to read from UART (err %d)", err); |
| return 0; |
| } |
| |
| return err; |
| } |
| |
| static inline void read_payload(const struct device *dev) |
| { |
| const struct h4_config *cfg = dev->config; |
| struct h4_data *h4 = dev->data; |
| struct net_buf *buf; |
| int read; |
| |
| if (!h4->rx.buf) { |
| size_t buf_tailroom; |
| |
| h4->rx.buf = get_rx(h4, K_NO_WAIT); |
| if (!h4->rx.buf) { |
| if (h4->rx.discardable) { |
| LOG_WRN("Discarding event 0x%02x", h4->rx.evt.evt); |
| h4->rx.discard = h4->rx.remaining; |
| reset_rx(h4); |
| return; |
| } |
| |
| LOG_WRN("Failed to allocate, deferring to rx_thread"); |
| uart_irq_rx_disable(cfg->uart); |
| return; |
| } |
| |
| LOG_DBG("Allocated rx.buf %p", h4->rx.buf); |
| |
| buf_tailroom = net_buf_tailroom(h4->rx.buf); |
| if (buf_tailroom < h4->rx.remaining) { |
| LOG_ERR("Not enough space in buffer %u/%zu", h4->rx.remaining, |
| buf_tailroom); |
| h4->rx.discard = h4->rx.remaining; |
| reset_rx(h4); |
| return; |
| } |
| |
| copy_hdr(h4); |
| } |
| |
| read = uart_fifo_read(cfg->uart, net_buf_tail(h4->rx.buf), h4->rx.remaining); |
| if (unlikely(read < 0)) { |
| LOG_ERR("Failed to read UART (err %d)", read); |
| return; |
| } |
| |
| net_buf_add(h4->rx.buf, read); |
| h4->rx.remaining -= read; |
| |
| LOG_DBG("got %d bytes, remaining %u", read, h4->rx.remaining); |
| LOG_DBG("Payload (len %u): %s", h4->rx.buf->len, |
| bt_hex(h4->rx.buf->data, h4->rx.buf->len)); |
| |
| if (h4->rx.remaining) { |
| return; |
| } |
| |
| buf = h4->rx.buf; |
| h4->rx.buf = NULL; |
| |
| if (h4->rx.type == BT_HCI_H4_EVT) { |
| bt_buf_set_type(buf, BT_BUF_EVT); |
| } else { |
| bt_buf_set_type(buf, BT_BUF_ACL_IN); |
| } |
| |
| reset_rx(h4); |
| |
| LOG_DBG("Putting buf %p to rx fifo", buf); |
| k_fifo_put(&h4->rx.fifo, buf); |
| } |
| |
| static inline void read_header(const struct device *dev) |
| { |
| struct h4_data *h4 = dev->data; |
| |
| switch (h4->rx.type) { |
| case BT_HCI_H4_NONE: |
| h4_get_type(dev); |
| return; |
| case BT_HCI_H4_EVT: |
| get_evt_hdr(dev); |
| break; |
| case BT_HCI_H4_ACL: |
| get_acl_hdr(dev); |
| break; |
| case BT_HCI_H4_ISO: |
| if (IS_ENABLED(CONFIG_BT_ISO)) { |
| get_iso_hdr(dev); |
| break; |
| } |
| __fallthrough; |
| default: |
| CODE_UNREACHABLE; |
| return; |
| } |
| |
| if (h4->rx.have_hdr && h4->rx.buf) { |
| if (h4->rx.remaining > net_buf_tailroom(h4->rx.buf)) { |
| LOG_ERR("Not enough space in buffer"); |
| h4->rx.discard = h4->rx.remaining; |
| reset_rx(h4); |
| } else { |
| copy_hdr(h4); |
| } |
| } |
| } |
| |
| static inline void process_tx(const struct device *dev) |
| { |
| const struct h4_config *cfg = dev->config; |
| struct h4_data *h4 = dev->data; |
| int bytes; |
| |
| if (!h4->tx.buf) { |
| h4->tx.buf = k_fifo_get(&h4->tx.fifo, K_NO_WAIT); |
| if (!h4->tx.buf) { |
| LOG_ERR("TX interrupt but no pending buffer!"); |
| uart_irq_tx_disable(cfg->uart); |
| return; |
| } |
| } |
| |
| if (!h4->tx.type) { |
| switch (bt_buf_get_type(h4->tx.buf)) { |
| case BT_BUF_ACL_OUT: |
| h4->tx.type = BT_HCI_H4_ACL; |
| break; |
| case BT_BUF_CMD: |
| h4->tx.type = BT_HCI_H4_CMD; |
| break; |
| case BT_BUF_ISO_OUT: |
| if (IS_ENABLED(CONFIG_BT_ISO)) { |
| h4->tx.type = BT_HCI_H4_ISO; |
| break; |
| } |
| __fallthrough; |
| default: |
| LOG_ERR("Unknown buffer type"); |
| goto done; |
| } |
| |
| bytes = uart_fifo_fill(cfg->uart, &h4->tx.type, 1); |
| if (bytes != 1) { |
| LOG_WRN("Unable to send H:4 type"); |
| h4->tx.type = BT_HCI_H4_NONE; |
| return; |
| } |
| } |
| |
| bytes = uart_fifo_fill(cfg->uart, h4->tx.buf->data, h4->tx.buf->len); |
| if (unlikely(bytes < 0)) { |
| LOG_ERR("Unable to write to UART (err %d)", bytes); |
| } else { |
| net_buf_pull(h4->tx.buf, bytes); |
| } |
| |
| if (h4->tx.buf->len) { |
| return; |
| } |
| |
| done: |
| h4->tx.type = BT_HCI_H4_NONE; |
| net_buf_unref(h4->tx.buf); |
| h4->tx.buf = k_fifo_get(&h4->tx.fifo, K_NO_WAIT); |
| if (!h4->tx.buf) { |
| uart_irq_tx_disable(cfg->uart); |
| } |
| } |
| |
| static inline void process_rx(const struct device *dev) |
| { |
| const struct h4_config *cfg = dev->config; |
| struct h4_data *h4 = dev->data; |
| |
| LOG_DBG("remaining %u discard %u have_hdr %u rx.buf %p len %u", |
| h4->rx.remaining, h4->rx.discard, h4->rx.have_hdr, h4->rx.buf, |
| h4->rx.buf ? h4->rx.buf->len : 0); |
| |
| if (h4->rx.discard) { |
| h4->rx.discard -= h4_discard(cfg->uart, h4->rx.discard); |
| return; |
| } |
| |
| if (h4->rx.have_hdr) { |
| read_payload(dev); |
| } else { |
| read_header(dev); |
| } |
| } |
| |
| static void bt_uart_isr(const struct device *uart, void *user_data) |
| { |
| struct device *dev = user_data; |
| |
| while (uart_irq_update(uart) && uart_irq_is_pending(uart)) { |
| if (uart_irq_tx_ready(uart)) { |
| process_tx(dev); |
| } |
| |
| if (uart_irq_rx_ready(uart)) { |
| process_rx(dev); |
| } |
| } |
| } |
| |
| static int h4_send(const struct device *dev, struct net_buf *buf) |
| { |
| const struct h4_config *cfg = dev->config; |
| struct h4_data *h4 = dev->data; |
| |
| LOG_DBG("buf %p type %u len %u", buf, bt_buf_get_type(buf), buf->len); |
| |
| k_fifo_put(&h4->tx.fifo, buf); |
| uart_irq_tx_enable(cfg->uart); |
| |
| return 0; |
| } |
| |
| /** Setup the HCI transport, which usually means to reset the Bluetooth IC |
| * |
| * @param dev The device structure for the bus connecting to the IC |
| * |
| * @return 0 on success, negative error value on failure |
| */ |
| int __weak bt_hci_transport_setup(const struct device *uart) |
| { |
| h4_discard(uart, 32); |
| return 0; |
| } |
| |
| static int h4_open(const struct device *dev, bt_hci_recv_t recv) |
| { |
| const struct h4_config *cfg = dev->config; |
| struct h4_data *h4 = dev->data; |
| int ret; |
| k_tid_t tid; |
| |
| LOG_DBG(""); |
| |
| uart_irq_rx_disable(cfg->uart); |
| uart_irq_tx_disable(cfg->uart); |
| |
| ret = bt_hci_transport_setup(cfg->uart); |
| if (ret < 0) { |
| return -EIO; |
| } |
| |
| h4->recv = recv; |
| |
| uart_irq_callback_user_data_set(cfg->uart, bt_uart_isr, (void *)dev); |
| |
| tid = k_thread_create(cfg->rx_thread, cfg->rx_thread_stack, |
| cfg->rx_thread_stack_size, |
| rx_thread, (void *)dev, NULL, NULL, |
| K_PRIO_COOP(CONFIG_BT_RX_PRIO), |
| 0, K_NO_WAIT); |
| k_thread_name_set(tid, "bt_rx_thread"); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_BT_HCI_SETUP) |
| static int h4_setup(const struct device *dev, const struct bt_hci_setup_params *params) |
| { |
| const struct h4_config *cfg = dev->config; |
| |
| ARG_UNUSED(params); |
| |
| /* Extern bt_h4_vnd_setup function. |
| * This function executes vendor-specific commands sequence to |
| * initialize BT Controller before BT Host executes Reset sequence. |
| * bt_h4_vnd_setup function must be implemented in vendor-specific HCI |
| * extansion module if CONFIG_BT_HCI_SETUP is enabled. |
| */ |
| extern int bt_h4_vnd_setup(const struct device *dev); |
| |
| return bt_h4_vnd_setup(cfg->uart); |
| } |
| #endif |
| |
| static const struct bt_hci_driver_api h4_driver_api = { |
| .open = h4_open, |
| .send = h4_send, |
| #if defined(CONFIG_BT_HCI_SETUP) |
| .setup = h4_setup, |
| #endif |
| }; |
| |
| #define BT_UART_DEVICE_INIT(inst) \ |
| static K_KERNEL_STACK_DEFINE(rx_thread_stack_##inst, CONFIG_BT_DRV_RX_STACK_SIZE); \ |
| static struct k_thread rx_thread_##inst; \ |
| static const struct h4_config h4_config_##inst = { \ |
| .uart = DEVICE_DT_GET(DT_INST_PARENT(inst)), \ |
| .rx_thread_stack = rx_thread_stack_##inst, \ |
| .rx_thread_stack_size = K_KERNEL_STACK_SIZEOF(rx_thread_stack_##inst), \ |
| .rx_thread = &rx_thread_##inst, \ |
| }; \ |
| static struct h4_data h4_data_##inst = { \ |
| .rx = { \ |
| .fifo = Z_FIFO_INITIALIZER(h4_data_##inst.rx.fifo), \ |
| }, \ |
| .tx = { \ |
| .fifo = Z_FIFO_INITIALIZER(h4_data_##inst.tx.fifo), \ |
| }, \ |
| }; \ |
| DEVICE_DT_INST_DEFINE(inst, NULL, NULL, &h4_data_##inst, &h4_config_##inst, \ |
| POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, &h4_driver_api) |
| |
| DT_INST_FOREACH_STATUS_OKAY(BT_UART_DEVICE_INIT) |