/*
 * Copyright (c) 2018 Intel Corporation
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr/kernel.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/sensor.h>
#include "board.h"
#include "mesh.h"

#include <zephyr/bluetooth/mesh.h>

static const struct device *const dev_info[] = {
	DEVICE_DT_GET_ONE(ti_hdc1010),
	DEVICE_DT_GET_ONE(nxp_mma8652fc),
	DEVICE_DT_GET_ONE(avago_apds9960),
	DEVICE_DT_GET_ONE(solomon_ssd16xxfb),
};

int get_hdc1010_val(struct sensor_value *val)
{
	if (sensor_sample_fetch(dev_info[DEV_IDX_HDC1010])) {
		printk("Failed to fetch sample for device %s\n",
		       dev_info[DEV_IDX_HDC1010]->name);
		return -1;
	}

	if (sensor_channel_get(dev_info[DEV_IDX_HDC1010],
			       SENSOR_CHAN_AMBIENT_TEMP, &val[0])) {
		return -1;
	}

	if (sensor_channel_get(dev_info[DEV_IDX_HDC1010],
			       SENSOR_CHAN_HUMIDITY, &val[1])) {
		return -1;
	}

	return 0;
}

int get_mma8652_val(struct sensor_value *val)
{
	if (sensor_sample_fetch(dev_info[DEV_IDX_MMA8652])) {
		printk("Failed to fetch sample for device %s\n",
		       dev_info[DEV_IDX_MMA8652]->name);
		return -1;
	}

	if (sensor_channel_get(dev_info[DEV_IDX_MMA8652],
			       SENSOR_CHAN_ACCEL_XYZ, &val[0])) {
		return -1;
	}

	return 0;
}

int get_apds9960_val(struct sensor_value *val)
{
	if (sensor_sample_fetch(dev_info[DEV_IDX_APDS9960])) {
		printk("Failed to fetch sample for device %s\n",
		       dev_info[DEV_IDX_APDS9960]->name);
		return -1;
	}

	if (sensor_channel_get(dev_info[DEV_IDX_APDS9960],
			       SENSOR_CHAN_LIGHT, &val[0])) {
		return -1;
	}

	if (sensor_channel_get(dev_info[DEV_IDX_APDS9960],
			       SENSOR_CHAN_PROX, &val[1])) {
		return -1;
	}

	return 0;
}

#define MOTION_TIMEOUT K_MINUTES(30)

static struct k_work_delayable motion_work;

static void motion_timeout(struct k_work *work)
{
	int err;

	printk("power save\n");

	if (!mesh_is_initialized()) {
		k_work_schedule(&motion_work, MOTION_TIMEOUT);
		return;
	}

	err = bt_mesh_suspend();
	if (err && err != -EALREADY) {
		printk("failed to suspend mesh (err %d)\n", err);
	}
}

static void motion_handler(const struct device *dev,
			   const struct sensor_trigger *trig)
{
	int err;

	printk("motion!\n");

	if (!mesh_is_initialized()) {
		return;
	}

	err = bt_mesh_resume();
	if (err && err != -EALREADY) {
		printk("failed to resume mesh (err %d)\n", err);
	}

	k_work_reschedule(&motion_work, MOTION_TIMEOUT);
}

static void configure_accel(void)
{
	const struct device *accel = dev_info[DEV_IDX_MMA8652];
	struct sensor_trigger trig_motion = {
		.type = SENSOR_TRIG_DELTA,
		.chan = SENSOR_CHAN_ACCEL_XYZ,
	};
	int err;

	err = sensor_trigger_set(accel, &trig_motion, motion_handler);
	if (err) {
		printk("setting motion trigger failed, err %d\n", err);
		return;
	}


	k_work_init_delayable(&motion_work, motion_timeout);
	k_work_schedule(&motion_work, MOTION_TIMEOUT);
}

int periphs_init(void)
{
	unsigned int i;

	/* Bind sensors */
	for (i = 0U; i < ARRAY_SIZE(dev_info); i++) {
		if (!device_is_ready(dev_info[i])) {
			printk("%s: device not ready.\n", dev_info[i]->name);
			return -ENODEV;
		}
	}

	configure_accel();

	return 0;
}