# Kconfig - STM32F0 and STM32F3 PLL configuration options
#
# Copyright (c) 2019 Linaro
#
#  SPDX-License-Identifier: Apache-2.0
#

if SOC_SERIES_STM32F0X || SOC_SERIES_STM32F3X

config CLOCK_STM32_PLL_PREDIV
	int "PREDIV Prescaler"
	default 1
	range 1 16
	help
	 PREDIV is PLLSCR clock signal prescaler, allowed values: 1 - 16.

config CLOCK_STM32_PLL_PREDIV1
	int "PREDIV1 Prescaler"
	depends on CLOCK_STM32_PLL_SRC_HSE
	depends on SOC_SERIES_STM32F0X
	default 1
	range 1 16
	help
	 PREDIV is PLLSCR clock signal prescaler, present on STM32F0 SoC having
	 an HSE Oscillator available like the stm32f04xx, stm32f07xx,
	 stm32f09xx and stm32f030xc parts. If configured on a non supported
	 part, the HSI oscillator will be used a default PLL source and this
	 config will be ignored.
	 Allowed values: 1 - 16.

config CLOCK_STM32_PLL_MULTIPLIER
	int "PLL multiplier"
	depends on CLOCK_STM32_SYSCLK_SRC_PLL
	default 6
	range 2 16
	help
	 PLL multiplier, allowed values: 2-16. PLL output must not exceed 48MHz.

endif # SOC_SERIES_STM32F0X || SOC_SERIES_STM32F3X