/**
  ******************************************************************************
  * @file    stm32l4xx_hal_firewall.h
  * @author  MCD Application Team
  * @version V1.7.1
  * @date    21-April-2017
  * @brief   Header file of FIREWALL HAL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************  
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L4xx_HAL_FIREWALL_H
#define __STM32L4xx_HAL_FIREWALL_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal_def.h"

/** @addtogroup STM32L4xx_HAL_Driver
  * @{
  */

/** @addtogroup FIREWALL  FIREWALL
  * @{
  */ 

/* Exported types ------------------------------------------------------------*/ 
/** @defgroup FIREWALL_Exported_Types FIREWALL Exported Types
  * @{
  */ 

/** 
  * @brief FIREWALL Initialization Structure definition  
  */ 
typedef struct
{
  uint32_t CodeSegmentStartAddress;        /*!< Protected code segment start address. This value is 24-bit long, the 8 LSB bits are
                                                reserved and forced to 0 in order to allow a 256-byte granularity. */

  uint32_t CodeSegmentLength;              /*!< Protected code segment length in bytes. This value is 22-bit long, the 8 LSB bits are 
                                                reserved and forced to 0 for the length to be a multiple of 256 bytes. */

  uint32_t NonVDataSegmentStartAddress;    /*!< Protected non-volatile data segment start address. This value is 24-bit long, the 8 LSB
                                                bits are reserved and forced to 0 in order to allow a 256-byte granularity. */

  uint32_t NonVDataSegmentLength;          /*!< Protected non-volatile data segment length in bytes. This value is 22-bit long, the 8 LSB
                                                bits are reserved and forced to 0 for the length to be a multiple of 256 bytes. */
 
  uint32_t VDataSegmentStartAddress;       /*!< Protected volatile data segment start address. This value is 17-bit long, the 6 LSB bits
                                                are reserved and forced to 0 in order to allow a 64-byte granularity. */

  uint32_t VDataSegmentLength;             /*!< Protected volatile data segment length in bytes. This value is 17-bit long, the 6 LSB
                                                bits are reserved and forced to 0 for the length to be a multiple of 64 bytes. */
  
  uint32_t VolatileDataExecution;          /*!< Set VDE bit specifying whether or not the volatile data segment can be executed.
                                                 When VDS = 1 (set by parameter VolatileDataShared), VDE bit has no meaning.
                                                This parameter can be a value of @ref FIREWALL_VolatileData_Executable */  
                                           
  uint32_t VolatileDataShared;             /*!< Set VDS bit in specifying whether or not the volatile data segment can be shared with a 
                                                non-protected application code.
                                                This parameter can be a value of @ref FIREWALL_VolatileData_Shared */  
                                                                                                                                     
}FIREWALL_InitTypeDef;


/**
  * @}
  */

  
/* Exported constants --------------------------------------------------------*/
/** @defgroup FIREWALL_Exported_Constants FIREWALL Exported Constants
  * @{
  */

/** @defgroup FIREWALL_VolatileData_Executable   FIREWALL volatile data segment execution status
  * @{
  */
#define FIREWALL_VOLATILEDATA_NOT_EXECUTABLE                 ((uint32_t)0x0000)
#define FIREWALL_VOLATILEDATA_EXECUTABLE                     ((uint32_t)FW_CR_VDE)
/**
  * @}
  */ 

/** @defgroup FIREWALL_VolatileData_Shared  FIREWALL volatile data segment share status
  * @{
  */ 
#define FIREWALL_VOLATILEDATA_NOT_SHARED                ((uint32_t)0x0000)
#define FIREWALL_VOLATILEDATA_SHARED                    ((uint32_t)FW_CR_VDS) 
/**
  * @}
  */ 

/** @defgroup FIREWALL_Pre_Arm FIREWALL pre arm status
  * @{
  */ 
#define FIREWALL_PRE_ARM_RESET                 ((uint32_t)0x0000)
#define FIREWALL_PRE_ARM_SET                   ((uint32_t)FW_CR_FPA)

/**
  * @}
  */

/**
  * @}
  */
  
/* Private macros --------------------------------------------------------*/
/** @defgroup FIREWALL_Private_Macros   FIREWALL Private Macros
  * @{
  */
#define IS_FIREWALL_CODE_SEGMENT_ADDRESS(ADDRESS)        (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) < (FLASH_BASE + FLASH_SIZE)))                                                   
#define IS_FIREWALL_CODE_SEGMENT_LENGTH(ADDRESS, LENGTH) (((ADDRESS) + (LENGTH)) <= (FLASH_BASE + FLASH_SIZE))

#define IS_FIREWALL_NONVOLATILEDATA_SEGMENT_ADDRESS(ADDRESS)        (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) < (FLASH_BASE + FLASH_SIZE)))                                                   
#define IS_FIREWALL_NONVOLATILEDATA_SEGMENT_LENGTH(ADDRESS, LENGTH) (((ADDRESS) + (LENGTH)) <= (FLASH_BASE + FLASH_SIZE)) 

#define IS_FIREWALL_VOLATILEDATA_SEGMENT_ADDRESS(ADDRESS)        (((ADDRESS) >= SRAM1_BASE) && ((ADDRESS) < (SRAM1_BASE + SRAM1_SIZE_MAX)))
#define IS_FIREWALL_VOLATILEDATA_SEGMENT_LENGTH(ADDRESS, LENGTH) (((ADDRESS) + (LENGTH)) <= (SRAM1_BASE + SRAM1_SIZE_MAX))                                                        
    
  
#define IS_FIREWALL_VOLATILEDATA_SHARE(SHARE) (((SHARE) == FIREWALL_VOLATILEDATA_NOT_SHARED) || \
                                               ((SHARE) == FIREWALL_VOLATILEDATA_SHARED))
                                               
#define IS_FIREWALL_VOLATILEDATA_EXECUTE(EXECUTE) (((EXECUTE) == FIREWALL_VOLATILEDATA_NOT_EXECUTABLE) || \
                                                   ((EXECUTE) == FIREWALL_VOLATILEDATA_EXECUTABLE))                                                                                    
/**
  * @}
  */  


/* Exported macros -----------------------------------------------------------*/
/** @defgroup FIREWALL_Exported_Macros FIREWALL Exported Macros
  * @{
  */

/** @brief  Check whether the FIREWALL is enabled or not.
  * @retval FIREWALL enabling status (TRUE or FALSE).
  */            
#define  __HAL_FIREWALL_IS_ENABLED()  HAL_IS_BIT_CLR(SYSCFG->CFGR1, SYSCFG_CFGR1_FWDIS)  


/** @brief Enable FIREWALL pre arm. 
  * @note When FPA bit is set, any code executed outside the protected segment 
  *       closes the Firewall, otherwise it generates a system reset.
  * @note This macro provides the same service as HAL_FIREWALL_EnablePreArmFlag() API
  *       but can be executed inside a code area protected by the Firewall. 
  * @note This macro can be executed whatever the Firewall state (opened or closed) when
  *       NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
  *       0, that is, when the non volatile data segment is defined), the macro can be
  *       executed only when the Firewall is opened.    
  */ 
#define __HAL_FIREWALL_PREARM_ENABLE()                                         \
             do {                                                              \
                  __IO uint32_t tmpreg;                                        \
                  SET_BIT(FIREWALL->CR, FW_CR_FPA) ;                           \
                  /* Read bit back to ensure it is taken into account by IP */ \
                  /* (introduce proper delay inside macro execution) */        \
                  tmpreg = READ_BIT(FIREWALL->CR, FW_CR_FPA) ;                 \
                  UNUSED(tmpreg);                                              \
                } while(0)


                    
/** @brief Disable FIREWALL pre arm. 
  * @note When FPA bit is set, any code executed outside the protected segment 
  *       closes the Firewall, otherwise, it generates a system reset.
  * @note This macro provides the same service as HAL_FIREWALL_DisablePreArmFlag() API
  *       but can be executed inside a code area protected by the Firewall.
  * @note This macro can be executed whatever the Firewall state (opened or closed) when
  *       NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
  *       0, that is, when the non volatile data segment is defined), the macro can be
  *       executed only when the Firewall is opened.      
  */ 
#define __HAL_FIREWALL_PREARM_DISABLE()                                        \
             do {                                                              \
                  __IO uint32_t tmpreg;                                        \
                  CLEAR_BIT(FIREWALL->CR, FW_CR_FPA) ;                         \
                  /* Read bit back to ensure it is taken into account by IP */ \
                  /* (introduce proper delay inside macro execution) */        \
                  tmpreg = READ_BIT(FIREWALL->CR, FW_CR_FPA) ;                 \
                  UNUSED(tmpreg);                                              \
                } while(0)

/** @brief Enable volatile data sharing in setting VDS bit. 
  * @note When VDS bit is set, the volatile data segment is shared with non-protected
  *       application code. It can be accessed whatever the Firewall state (opened or closed). 
  * @note This macro can be executed inside a code area protected by the Firewall.
  * @note This macro can be executed whatever the Firewall state (opened or closed) when
  *       NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
  *       0, that is, when the non volatile data segment is defined), the macro can be
  *       executed only when the Firewall is opened.      
  */ 
#define __HAL_FIREWALL_VOLATILEDATA_SHARED_ENABLE()                            \
             do {                                                              \
                  __IO uint32_t tmpreg;                                        \
                  SET_BIT(FIREWALL->CR, FW_CR_VDS) ;                           \
                  /* Read bit back to ensure it is taken into account by IP */ \
                  /* (introduce proper delay inside macro execution) */        \
                  tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDS) ;                 \
                  UNUSED(tmpreg);                                              \
                } while(0)

/** @brief Disable volatile data sharing in resetting VDS bit. 
  * @note When VDS bit is reset, the volatile data segment is not shared and cannot be 
  *       hit by a non protected executable code when the Firewall is closed. If it is 
  *       accessed in such a condition, a system reset is generated by the Firewall.
  * @note This macro can be executed inside a code area protected by the Firewall. 
  * @note This macro can be executed whatever the Firewall state (opened or closed) when
  *       NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
  *       0, that is, when the non volatile data segment is defined), the macro can be
  *       executed only when the Firewall is opened.     
  */ 
#define __HAL_FIREWALL_VOLATILEDATA_SHARED_DISABLE()                           \
             do {                                                              \
                  __IO uint32_t tmpreg;                                        \
                  CLEAR_BIT(FIREWALL->CR, FW_CR_VDS) ;                         \
                  /* Read bit back to ensure it is taken into account by IP */ \
                  /* (introduce proper delay inside macro execution) */        \
                  tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDS) ;                 \
                  UNUSED(tmpreg);                                              \
                } while(0)

/** @brief Enable volatile data execution in setting VDE bit.
  * @note VDE bit is ignored when VDS is set. IF VDS = 1, the Volatile data segment can be 
  *       executed whatever the VDE bit value.  
  * @note When VDE bit is set (with VDS = 0), the volatile data segment is executable. When
  *       the Firewall call is closed, a "call gate" entry procedure is required to open 
  *       first the Firewall.
  * @note This macro can be executed inside a code area protected by the Firewall.
  * @note This macro can be executed whatever the Firewall state (opened or closed) when
  *       NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
  *       0, that is, when the non volatile data segment is defined), the macro can be
  *       executed only when the Firewall is opened.         
  */ 
#define __HAL_FIREWALL_VOLATILEDATA_EXECUTION_ENABLE()                         \
             do {                                                              \
                  __IO uint32_t tmpreg;                                        \
                  SET_BIT(FIREWALL->CR, FW_CR_VDE) ;                           \
                  /* Read bit back to ensure it is taken into account by IP */ \
                  /* (introduce proper delay inside macro execution) */        \
                  tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDE) ;                 \
                  UNUSED(tmpreg);                                              \
                } while(0)

/** @brief Disable volatile data execution in resetting VDE bit.
  * @note VDE bit is ignored when VDS is set. IF VDS = 1, the Volatile data segment can be 
  *       executed whatever the VDE bit value.  
  * @note When VDE bit is reset (with VDS = 0), the volatile data segment cannot  be executed.
  * @note This macro can be executed inside a code area protected by the Firewall. 
  * @note This macro can be executed whatever the Firewall state (opened or closed) when
  *       NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
  *       0, that is, when the non volatile data segment is defined), the macro can be
  *       executed only when the Firewall is opened.        
  */
#define __HAL_FIREWALL_VOLATILEDATA_EXECUTION_DISABLE()                           \
             do {                                                              \
                  __IO uint32_t tmpreg;                                        \
                  CLEAR_BIT(FIREWALL->CR, FW_CR_VDE) ;                         \
                  /* Read bit back to ensure it is taken into account by IP */ \
                  /* (introduce proper delay inside macro execution) */        \
                  tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDE) ;                 \
                  UNUSED(tmpreg);                                              \
                } while(0)   


/** @brief Check whether or not the volatile data segment is shared.
  * @note This macro can be executed inside a code area protected by the Firewall.
  * @note This macro can be executed whatever the Firewall state (opened or closed) when
  *       NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
  *       0, that is, when the non volatile data segment is defined), the macro can be
  *       executed only when the Firewall is opened.      
  * @retval VDS bit setting status (TRUE or FALSE).
  */
#define __HAL_FIREWALL_GET_VOLATILEDATA_SHARED() ((FIREWALL->CR & FW_CR_VDS) == FW_CR_VDS)

/** @brief Check whether or not the volatile data segment is declared executable.
  * @note This macro can be executed inside a code area protected by the Firewall.
  * @note This macro can be executed whatever the Firewall state (opened or closed) when
  *       NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
  *       0, that is, when the non volatile data segment is defined), the macro can be
  *       executed only when the Firewall is opened.      
  * @retval VDE bit setting status (TRUE or FALSE).
  */
#define __HAL_FIREWALL_GET_VOLATILEDATA_EXECUTION() ((FIREWALL->CR & FW_CR_VDE) == FW_CR_VDE)

/** @brief Check whether or not the Firewall pre arm bit is set.
  * @note This macro can be executed inside a code area protected by the Firewall.
  * @note This macro can be executed whatever the Firewall state (opened or closed) when
  *       NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
  *       0, that is, when the non volatile data segment is defined), the macro can be
  *       executed only when the Firewall is opened.      
  * @retval FPA bit setting status (TRUE or FALSE).
  */
#define __HAL_FIREWALL_GET_PREARM() ((FIREWALL->CR & FW_CR_FPA) == FW_CR_FPA)


/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/

/** @addtogroup FIREWALL_Exported_Functions FIREWALL Exported Functions
  * @{
  */
  
/** @addtogroup FIREWALL_Exported_Functions_Group1 Initialization Functions
  * @brief    Initialization and Configuration Functions  
  * @{
  */  
  
/* Initialization functions  ********************************/
HAL_StatusTypeDef HAL_FIREWALL_Config(FIREWALL_InitTypeDef * fw_init);
void HAL_FIREWALL_GetConfig(FIREWALL_InitTypeDef * fw_config);
void HAL_FIREWALL_EnableFirewall(void);
void HAL_FIREWALL_EnablePreArmFlag(void);
void HAL_FIREWALL_DisablePreArmFlag(void);

/**
  * @}
  */
  
/**
  * @}
  */   

/**
  * @}
  */ 

/**
  * @}
  */ 
  
#ifdef __cplusplus
}
#endif

#endif /* __STM32L4xx_HAL_FIREWALL_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/