/*
 * Copyright (c) 2023 Andreas Sandberg
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;
#include <st/g4/stm32g431Xb.dtsi>
#include <st/g4/stm32g431c(6-8-b)ux-pinctrl.dtsi>
#include <zephyr/dt-bindings/usb-c/pd.h>
#include <zephyr/dt-bindings/input/input-event-codes.h>

/ {
	model = "WeAct Studio STM32G431 Core Board";
	compatible = "weact,stm32g431-core";

	chosen {
		zephyr,console = &usart2;
		zephyr,shell-uart = &usart2;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
	};

	aliases {
		led0 = &led_0;
		mcuboot-button0 = &button_0;
		mcuboot-led0 = &led_0;
		sw0 = &button_0;
		sw1 = &button_1;
		usbc-port0 = &usbc1;
		watchdog0 = &iwdg;
	};

	leds {
		compatible = "gpio-leds";
		led_0: led0 {
			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
			label = "Status LED";
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		button_0: button0 {
			label = "User";
			gpios = <&gpioc 13 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>;
			zephyr,code = <INPUT_KEY_0>;
		};
		button_1: button1 {
			label = "Boot0";
			gpios = <&gpiob 8 GPIO_ACTIVE_HIGH>;
			zephyr,code = <INPUT_KEY_1>;
		};
	};

	vbus1: vbus {
		compatible = "zephyr,usb-c-vbus-adc";
		status = "disabled";
		io-channels = <&adc2 12>;
		output-ohms = <10000>;
		full-ohms = <(100000 + 10000)>;
	};

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		usbc1: usbc-port@1 {
			compatible = "usb-c-connector";
			status = "disabled";
			reg = <1>;
			tcpc = <&ucpd1>;
			vbus = <&vbus1>;
			data-role = "device";
			power-role = "sink";
			sink-pdos = <PDO_FIXED(5000, 100, PDO_FIXED_USB_COMM)>;
		};
	};
};

&clk_lsi {
	status = "okay";
};

&clk_lse {
	status = "okay";
};

&clk_hsi {
	status = "disabled";
};

&clk_hse {
	status = "okay";
	clock-frequency = <DT_FREQ_M(8)>;
};

&rcc {
	clocks = <&pll>;
	clock-frequency = <DT_FREQ_M(144)>;
	ahb-prescaler = <1>;
	apb1-prescaler = <1>;
	apb2-prescaler = <1>;
};

&pll {
	status = "okay";
	div-m = <2>;
	mul-n = <72>;
	div-p = <2>;
	div-q = <6>;
	div-r = <2>;
	clocks = <&clk_hse>;
};

&rtc {
	status = "okay";
	clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000400>,
		 <&rcc STM32_SRC_LSE RTC_SEL(1)>;
};

stm32_lp_tick_source: &lptim1 {
	status = "okay";
	clocks = <&rcc STM32_CLOCK_BUS_APB1 0x80000000>,
		 <&rcc STM32_SRC_LSE LPTIM1_SEL(3)>;
};

&flash0 {
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		/* 4KiB of storage at the end of the 128KiB FLASH */
		storage_partition: partition@1f000 {
			label = "storage";
			reg = <0x0001f000 DT_SIZE_K(4)>;
		};
	};
};

&iwdg {
	status = "okay";
};

&usart2 {
	status = "okay";
	pinctrl-0 = <&usart2_tx_pa2 &usart2_rx_pa3>;
	pinctrl-names = "default";

	current-speed = <115200>;
};

&adc2 {
	pinctrl-0 = <&adc2_in12_pb2>;
	pinctrl-names = "default";
	st,adc-clock-source = <SYNC>;
	st,adc-prescaler = <4>;

	#address-cells = <1>;
	#size-cells = <0>;

	channel@c {
		reg = <12>;
		zephyr,gain = "ADC_GAIN_1";
		zephyr,reference = "ADC_REF_INTERNAL";
		zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
		zephyr,resolution = <12>;
		zephyr,vref-mv = <3300>;
	};
};

&ucpd1 {
	psc-ucpdclk = <1>;
	hbitclkdiv = <27>;
	pinctrl-0 = <&ucpd1_cc1_pb6 &ucpd1_cc2_pb4>;
	pinctrl-names = "default";
};

zephyr_udc0: &usb {
	pinctrl-0 = <&usb_dm_pa11 &usb_dp_pa12>;
	pinctrl-names = "default";
	clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00800000>,
		 <&rcc STM32_SRC_PLL_Q CLK48_SEL(2)>;
	status = "okay";
};