| common: |
| tags: |
| - drivers |
| - gpio |
| depends_on: gpio |
| harness: ztest |
| harness_config: |
| fixture: gpio_loopback |
| |
| tests: |
| drivers.gpio.2pin: |
| min_flash: 34 |
| filter: dt_compat_enabled("test-gpio-basic-api") and not dt_compat_enabled("arduino-header-r3") |
| |
| drivers.gpio.nrf_sense_edge: |
| platform_allow: |
| - nrf52840dk/nrf52840 |
| - nrf52_bsim |
| - nrf5340bsim/nrf5340/cpuapp |
| - nrf5340bsim/nrf5340/cpunet |
| - nrf54l15bsim/nrf54l15/cpuapp |
| integration_platforms: |
| - nrf52840dk/nrf52840 |
| extra_args: "DTC_OVERLAY_FILE=boards/nrf52840dk_nrf52840.overlay;\ |
| boards/nrf52840dk_nrf52840_sense_edge.overlay" |
| |
| drivers.gpio.mr_canhubk3_wkpu: |
| platform_allow: mr_canhubk3 |
| extra_args: "DTC_OVERLAY_FILE=boards/mr_canhubk3_wkpu.overlay" |
| |
| drivers.gpio.2pin_ke17z_fgpio: |
| min_flash: 34 |
| filter: dt_compat_enabled("test-gpio-basic-api") |
| platform_allow: |
| - frdm_ke17z |
| - frdm_ke17z512 |
| extra_args: "DTC_OVERLAY_FILE=boards/frdm_ke17z_fgpio.overlay" |
| harness_config: |
| fixture: fgpio_loopback |
| |
| drivers.gpio.2pin_arduino: |
| min_flash: 34 |
| depends_on: |
| - gpio |
| - arduino_gpio |
| filter: > |
| dt_compat_enabled("test-gpio-basic-api") and dt_compat_enabled("arduino-header-r3") |
| and not CONFIG_SOC_FAMILY_STM32 |
| extra_args: "DTC_OVERLAY_FILE=arduino_D2D3.overlay" |
| extra_configs: |
| - CONFIG_SKIP_PULL_TEST=y |
| integration_platforms: |
| - frdm_k64f |
| platform_exclude: |
| # below boards are customized |
| - mimxrt595_evk/mimxrt595s/cm33 |
| - mimxrt1020_evk |
| - mimxrt1040_evk |
| - mimxrt1060_evk |
| - mimxrt1060_evkb |
| - lpcxpresso55s69/lpc55s69/cpu0 |
| - lpcxpresso55s36 |
| drivers.gpio.2pin_arduino_customized: |
| min_flash: 34 |
| depends_on: |
| - gpio |
| - arduino_gpio |
| filter: dt_compat_enabled("test-gpio-basic-api") and dt_compat_enabled("arduino-header-r3") |
| platform_allow: |
| - mimxrt595_evk/mimxrt595s/cm33 |
| - mimxrt1020_evk |
| - mimxrt1040_evk |
| - mimxrt1060_evk |
| - mimxrt1060_evkb |
| - lpcxpresso55s69/lpc55s69/cpu0 |
| - lpcxpresso55s36 |
| - nucleo_wb09ke |
| - nucleo_wb05kz |
| - nucleo_wba55cg |
| integration_platforms: |
| - mimxrt595_evk/mimxrt595s/cm33 |
| drivers.gpio.st_2pin_arduino: |
| min_flash: 34 |
| depends_on: |
| - gpio |
| - arduino_gpio |
| filter: > |
| dt_compat_enabled("test-gpio-basic-api") and dt_compat_enabled("arduino-header-r3") |
| and CONFIG_SOC_FAMILY_STM32 |
| extra_args: "DTC_OVERLAY_FILE=arduino_D9D10.overlay" |
| integration_platforms: |
| - disco_l475_iot1 |
| platform_exclude: |
| # below boards need customized |
| - nucleo_wb05kz |
| - nucleo_wb09ke |
| - nucleo_wba55cg |
| drivers.gpio.2pin_aw9523b: |
| depends_on: |
| - gpio |
| - arduino_gpio |
| - i2c |
| - arduino_i2c |
| harness_config: |
| fixture: aw9523b_on_arduino_header |
| filter: dt_compat_enabled("test-gpio-basic-api") and dt_compat_enabled("arduino-header-r3") and |
| dt_nodelabel_enabled("arduino_i2c") |
| extra_dtc_overlay_files: |
| - boards/aw9523b_on_arduino_header.overlay |